All Products

Ideal for OE replacement on mid-size motorcycles. This lightweight and durable chain provides quick and smooth acceleration. Designed with cutting-edge technology from on-road and off-road racing. Features RK's original double-X-shaped 'XW-Ring' seal for exceptionally long chain wear-life.

Premier quality high speed, extreme heat chain available. Chains include rivet connecting link. 520ZXW tensile strength of 9,442 lbs. and maximum cc of 1200. 525ZXW tensile strength of 10,431 lbs. and maximum cc of 1300. 530ZXW tensile strength of 11,200 lbs. and maximum cc of 1400.

Developed in conjunction with Chris Rivas to develop the right system to address M-Eight big motor builds. Features equal-length stepped headpipes from 1 3/4" into 2" and then into 2 1/8". 4" muffler housing has 3" louvered removable baffle. Includes full heat shields, billet end cap, 18 mm O2 bung and 12 mm adapters. Recommended for bikes with...

4" reverse-cone megaphone muffler body with matching billet end cap. 1 3/4" headpipe steps up to 1 7/8" into the collector to increase flow and improve performance. Features removable spiral-core louvered baffle, hand MIG welding, and 18 mm/12 mm O2 ports with adapters.

Designed specifically to address the needs of tuned motors built for high-horsepower applications. Features a unique extended inner collector for maximizing performance and a 4" straight-style performance muffler body with 2 1/2" OD x 16 1/2" L baffle and black billet end cap with contrasting machined flutes. Includes full-coverage heat shields...

Designed specifically to address the needs of tuned motors built for high-horsepower applications. Features a 12" tapered megaphone-style muffler body with 4" black billet end cap with contrasting machined flutes. Includes full-coverage heat shields, removable baffle, and O2 sensor ports/plugs.

An authentic retro-styled tool bag constructed of premium full-grain cowhide. Attaches to your front fork, rear swingarm or other locations on your motorcycle using supplied leather straps. The bag is held closed with traditional belt buckles. Made in the U.S.A. Round leather tool bag

A premium line of motorcycle luggage featuring industry-leading UltraMax fabric for maximum UV protection against fading. These bags are designed for durability and convenience, with features like rigid construction, reflective piping, and model-specific mounting systems. Route 1 Day Trip roll bag

A magnetic phone holder made from innovative UltraMax™ durable polyester with the highest UV protection. Sized to fit all current plus-size phones, it attaches to metal tanks with strong magnets. The position can be adjusted for optimal viewing and to reduce sun glare. Features a clear, touchscreen-friendly top, reverse coil zippers, and inner...

A premium line of motorcycle luggage featuring industry-leading UltraMax fabric for maximum UV protection against fading. These bags are designed for durability and convenience, with features like rigid construction, reflective piping, and model-specific mounting systems. Nelson Rigg Route 1 Rover Pet Carrier with UltraMax fabric.

A premium line of motorcycle luggage featuring industry-leading UltraMax fabric for maximum UV protection against fading. These bags are designed for durability and convenience, with features like rigid construction, reflective piping, and model-specific mounting systems. Route 1 Traveler Tour trunk bag

A premium line of motorcycle luggage featuring industry-leading UltraMax fabric for maximum UV protection against fading. These bags are designed for durability and convenience, with features like rigid construction, reflective piping, and model-specific mounting systems. Route 1 Weekender tank bag

Moves handlebars 1 1/2" up and 1" back or forward from the OEM position. Designed to work on any bike with a stock 1 1/8" Fatbar, parallel OEM bar clamps and open mounting area. Machined from 6061-T6 aircraft-grade billet aluminum. Includes mounting hardware, instructions, and step shims. Made in the U.S.A.

Provides 1 1/2" of total pullback, moving the bar approximately 1 1/4" up and 3/4" back from the OEM position. Clear anodized finish. Includes mounting hardware and works with stock cables. Made in the U.S.A. Provides 1 1/2" of total pullback, moving the bar approximately 1 1/4" up and 3/4" back from the OEM position. Clear anodized finish....

1 3/4" center-to-center rise with 26 mm stem. Pivot forward or backward depending on rider preference. Black anodized finish. 1 3/4" center-to-center rise with 26 mm stem. Pivot forward or backward depending on rider preference. Black anodized finish.

Sleek, stylish design risers that fit most applications with 7/8" handlebars and a 7/8" bar clamp. Machined from billet 6061-T6 aluminum with an anodized clear finish. Made in the U.S.A. Sleek, stylish design risers that fit most applications with 7/8" handlebars and a 7/8" bar clamp. Machined from billet 6061-T6 aluminum with an anodized clear...

2" rise risers that fit many makes/models of cruiser bikes with a 1" diameter bar and an open mounting area. Machined from 6061-T6 aluminum. Risers do not work on Yamaha V-Star 1300. Made in the U.S.A.

Reduces bar vibration and hand tingling/numbness. Risers pivot Forward/Backward. 2" of rise, 1 1/4" stem, accepts 1 1/4" handlebar. Designed to use the stock BMW caps/bolts on the top of the risers. Work with stock cables. Made in the U.S.A. Reduces bar vibration and hand tingling/numbness. Risers pivot Forward/Backward. 2" of rise, 1 1/4" stem,...

Pivoting riser kits that can be positioned forward, backward or anywhere in between. Bottom fits 1" handlebar clamps; 1" bar clamp on the top side. Constructed from aircraft-grade aluminum (6061-T6). Made in the U.S.A.

Very easy installation with a lifetime warranty. Provides 1 1/2" rise and moves the handlebar 1.5" up and 1.2" back. Works with OEM cables and lines. Black anodized finish. Made in the U.S.A. Very easy installation with a lifetime warranty. Provides 1 1/2" rise and moves the handlebar 1.5" up and 1.2" back. Works with OEM cables and lines. Black...

2" rise with 1 1/4" stem. Accepts 1 1/4" handlebars and pivots forward or backward depending on rider preference. Works with stock cables. Comes with low-profile caps to replace the OEM bar clamp caps. Features clear anodized finish. Made in the U.S.A. 2" rise with 1 1/4" stem. Accepts 1 1/4" handlebars and pivots forward or backward depending on...

Designed to fit C&A Pro Skis and significantly improve cornering performance.

Aggressive running board tread designed to fit places where standard grip strips may not. Edge grippers can be nested together to create one long continuous strip. Sold in packs of 6.

2" center-to-center rise with 1 1/8" stem. Pivots backward/forward based on rider preference and accepts 1 1/8" handlebars. Extended stem on the bottom portion of the riser makes for a great fit for bikes with angled handlebar clamps.

A series of high-performance handguards designed for the toughest riding conditions, featuring a rigid but flexible backbone that will bend and flex when necessary. Mounts are sold separately. Made in the U.S.A.