Wraps will increase power and reduce radiated exhaust heat. Kit includes 2" W x 25' L top-quality high-temperature wrap and four stainless steel tie wraps for that finishing touch. Wraps can withstand up to 2,000 F (1,093 C). Available in black.

Allows removal of unsightly lines and hoses. Cleans up the look of your engine. Reduces backfire. Does not require re-tuning of carburetors or fuel injection systems. Blends seamlessly with engine. Easily installed by most owners. Made in the U.S.A.

Custom exhaust tips with special cuts for a unique style. Each tip can be rotated into almost limitless positions and sold individually to mix and match. Features seamless mounting and a chrome finish. Made in the U.S.A.

Exhaust pipe springs. 62 mm size are stainless steel with a double swivel design. 80 mm size are zinc-plated steel. Sold in packs of 4.

Exhaust pipe springs specifically for Honda models. Sold in 4-packs.

Milled from solid blocks of aluminum and polished and chromed to a lustrous finish. These tips fit 2.5-inch Speedster and Dragster exhaust systems. Sold each. Made in the U.S.A.

High-quality heat shields look great and keep you cool. Shields are triple chrome-plated and highly polished for a non-blueing look for years to come. Comes complete with clamps for mounting. Sold each. Made in the U.S.A.

A hardware kit that includes two nut plates and four 5/16"-18 x 5/8" bolts. Fits all Vance & Hines systems and slip-on mufflers that use the dog bone style attachment system. Made in the U.S.A. Dog Bone kit

Fiberglass-wrapped steel construction exhaust baffles. May require drilling a hole in the exhaust pipe for installation. Sold each.

Chromed 1/8" thick steel exhaust hangers. Sold each.

Eliminates the need for a heavy, bulky exhaust servo motor and valve assembly when using an aftermarket exhaust. Keeps the FI light from coming on unless there is a 'real' problem with the bike's systems. Eliminates the weight of the fake 'valve', adds space for additional components.

Features laser-cut Vance & Hines wrap clamps, black header wrap tape and locking stainless steel ties. Black, fiberglass composite wrap tape locks in heat and reduces the radiant heat by 50%. Kit will wrap two motorcycle headers thoroughly. Includes 2" W x 25' L roll of black wrap tape, two Vance & Hines Wrap Clamps and six locking stainless steel...

Steel rivets with corrosion resistant coating, designed to be pulled by a hand operated rivet gun. Rivet diameter 3/16" with a grip range of 0.125" to 0.6". Kit includes 20 rivets and 1 properly sized 3/16" drill bit. Made in the U.S.A. Exhaust rivet kit

High-temperature exhaust sealing tape with adhesive. Designed to seal exhaust joints on the muffler when repacking or if needed where the muffler attaches to the head pipe. Max operating temperature is 525 F. Package includes two strips of tape; each measures 8" L x 1" W x 0.020" H. Made in the U.S.A. Exhaust tape

Repack blown-out silencer for quieter running and more power. Long-filament fiberglass made especially for muffler packing. Measures 10.5" x 16", more than enough to repack virtually any 2-stroke silencer. Made in the U.S.A. Fiberglass muffler packing

Universal fit heat shields for use with 2" to 2 1/4" OD exhaust pipes. Measure 10" in length with a chrome-plated finish. Clamps included. Sold in pairs. Flaming skull heat shields

Wraps will increase power and reduce radiated exhaust heat. Kit includes 2" W x 25' L top-quality high-temperature wrap and four stainless steel tie wraps for that finishing touch. Wraps can withstand up to 2,000 F (1,093 C). Available in black. 2" W x 25' L

A collection of replacement and accessory parts for LeoVince exhaust systems, including heat shields, noise reduction inserts (dB killers), lambda plug wire extensions, and replacement gasket kits.

Stainless steel construction gives superior strength and appearance. Swivel hook design eliminates binding, extending spring life. Sold in pairs. Made in the U.S.A. NOTE: When measuring for exhaust spring length, please use the following points for reference: 1. Exhaust springs should be measured when they are off the vehicle. Wear eye protection...

Steel rivets with corrosion resistant coating, designed to be pulled by a hand operated rivet gun. Rivet diameter 3/16" with a grip range of 0.125" to 0.6". Kit includes 20 rivets and 1 properly sized 3/16" drill bit. Made in the U.S.A.

Stainless steel construction gives superior strength and attractive appearance. Swivel hook design eliminates binding, extending spring life. Available for most late-model 2-stroke and 4-stroke models. Sold in pairs. Made in the U.S.A.

High-temperature exhaust sealing tape with adhesive. Designed to seal exhaust joints on the muffler when repacking or if needed where the muffler attaches to the head pipe. Max operating temperature is 525 F. Package includes two strips of tape; each measures 8" L x 1" W x 0.020" H. Made in the U.S.A.

Fiberglass cloth wrap available in black and tan. Stable at temperatures up to 2,000 F. Insulates exhaust header pipes to protect you or your machine from intense heat. Generous size roll is enough to wrap one long header or critical areas on multiple exhausts; measures 2" W x 50' L. Made in the U.S.A.

Adapters allow mounting of 'classic' Triumph TR6/T120 63-70 mufflers on Hinkley Bonneville models for a classic look and exhaust note. Constructed of 18-gauge chromed steel and slips on stock header pipes to allow mufflers with 1 1/2" to be easily mounted. Sold in pairs. Muffler adapters for Triumph

Three-piece set gives any 1 3/4" ID muffler a perfect fit over three sizes of pipes. Reduces 1 3/4" ID to three sizes: 1 5/8", 1 1/2" or 1 3/8". Muffler and exhaust reducer set