Plug-and-play one-light wiring harness engineered for seamless integration with existing lighting setup. Perfect for use where 8' wiring may be too long and you don't want to cut/splice wires. Features a weatherproof on/off switch. Designed to provide hassle-free installation and operation. For use with light equipped with a Deutsch (DT) connector.

Constructed from sandblasted, lightweight titanium that is high-strength and corrosion-resistant. Offers an approximately 40% weight savings over comparable steel versions. Precision TIG welded and equipped with laser-cut, finely machined 8 mm flanges to provide a perfect fit and strength. Fits perfectly with the bike's existing components and...

Allow the addition of custom marker lights to a motorcycle quickly and easily. Polished stainless steel construction. Accept most aftermarket marker lights. Available with 90° bend for use in custom applications. Sold in pairs. Made in the U.S.A. Allow the addition of custom marker lights to a motorcycle quickly and easily. Polished stainless...

White braided flex sleeving with a 3/8" ID. Comes in a 10' length. Made in the U.S.A. White braided flex sleeving with a 3/8" ID. Comes in a 10' length. Made in the U.S.A.

Brite Lites Deluxe wiring harnesses are complete with a relay, fusable link, and lighted switch. Light bar harnesses have plug-and-play connections for use with Brite Lites LED light bars. Triple-sealed for water-tight use.

Designed to extend and split the output line on Brite Lites HD wiring harnesses. Features two male and one female DT connectors on a 4' cable. Designed to extend and split the output line on Brite Lites HD wiring harnesses. Features two male and one female DT connectors on a 4' cable.

Adds length to HD wiring harnesses. Features male and female DT connectors. Rated for 200W.

HD wiring harness with lighted rocker switch. Features dual DT connector outputs for connecting two LED cube lights. Rocker switch has 'Work Lights' printed on it. Includes fuse, relay, and ring terminals. Made for in-dash knockout type switch mount. HD wiring harness with lighted rocker switch. Features dual DT connector outputs for connecting...

Replacement rocker switches for Brite Lites HD series wiring harnesses. Backlit in blue, features 16" wire to junction connector, and rated for 240W.

Clean up the tail of the Honda Rebel with this side-mount, dual-function, run/brake LED design. The bracket is made from 12-gauge stamped steel with slash-cut windows and includes mounting hardware for direct bolt-on installation. Clean up the tail of the Honda Rebel with this side-mount, dual-function, run/brake LED design. The bracket is made...

Add visibility for safety and style. Spotlights come pre-installed on the lightbar. Just buy it, bolt it on and plug it in. Accepts stock turn signals. Made in the U.S.A. NOTE: Lightbars are designed for fitment on stock motorcycles. Installation of a windscreen may cause clearance problems.

Eliminate the rear fender to give your bike a cleaner race-style look. Quality, all-stainless-steel kits move the turn signals up and in, and relocate the license plate light on most models. Some cutting and drilling may be necessary on some models, but only to the black plastic fender, never the frame or bodywork. Made in the U.S.A.

Universal trailer harness that provides plug-and-play wire hook-up to any 4-way flat trailer plug. Features extended 50" wire leads and heavy-duty 14-gauge wire. Universal trailer harness that provides plug-and-play wire hook-up to any 4-way flat trailer plug. Features extended 50" wire leads and heavy-duty 14-gauge wire.

Fit any 12 to 16VDC systems with negative ground. Dual-color models feature three wire units, single-color models feature two wire units. Aluminum bullet housings with clear acrylic lenses. 45" leads are pre-pinned on dual color options for easy plug-and-play installation. Mounting brackets sold separately. Sold in pairs. NOTE: PART #s 2040-2708...

Mounting brackets for Micro Bullet turn signals. Fit any 3/8" bolt hole. Made from 0.12" thick aluminum. Sold in pairs.

Aluminum bullet shaped gloss black housing with sealed acrylic spherical lens maximizes LED light output for a bright spot of light. Three-wire units function as white running light with full contrast amber turn signal, no additional converters required. 45" leads are pre-pinned for use with optional wire harnesses available for plug-and-play...

Provide hassle-free mounting of Custom Dynamics driving lights with a 5/16" mounting hole. Designed with a setscrew for secure mounting. Allen wrench included. Sold in pairs.

Utilize Cree LEDs to produce a superior beam pattern with a super-bright white LED halo. Available in traditional clear or selective yellow polycarbonate lenses. Clear lens produces a white halo and beam for optimizing light output and distance, while yellow lens minimizes glare from harsh conditions. Easily mount to engine guards with ProBEAM...

Individual components for the ProGLOW™ color-changing LED lighting system, including light strips, wire extensions, and splitters. Allows for custom installations and expansions. All components are for universal 12VDC systems and feature watertight IP67 rated connectors.

Optional accessory to convert two-wire TruFlex II® LED strips to a three-wire dual-intensity system (Low, High, and Ground). Sold separately.

Quick-disconnect for any two, three or four wire auxiliary lighting product. Features 22 AWG wires, 15" total wire length, and four-pin JAE connectors. Sold in pairs. Quick-disconnect for any two, three or four wire auxiliary lighting product. Features 22 AWG wires, 15" total wire length, and four-pin JAE connectors. Sold in pairs.

Converts 2-wire Custom Dynamics Wrap-Arounds™ turn signals to 3-wire, allowing them to function as both running and turn signals. Sold in pairs. Converts 2-wire Custom Dynamics Wrap-Arounds™ turn signals to 3-wire, allowing them to function as both running and turn signals. Sold in pairs.

Electro-plated color resists discoloration under repeated bending. Sold in 10 pk.

Designed for custom applications with a mounting block at the back of the housing. Includes the mounting block and a 55/60W H4 bulb system; replacement bulbs are available separately. DOT compliant.

Three-piece clamps work great for mounting footpegs, driving lights or other custom applications. Heavy-duty design with 1/2" through hole. Sold each.