Kits include all bushings needed for a complete fork rebuild.

Comprehensive fork oil and dust seal kits for a wide range of motorcycles and scooters. Kits are available as a complete set with both oil and dust seals, or as separate 'Fork Seals Only' and 'Dust Seals Only' packages to meet specific maintenance needs.

Features billet aluminum construction. Designed for use with Alloy Art 49 mm Lower Fork Legs. Made in the U.S.A. Features billet aluminum construction. Designed for use with Alloy Art 49 mm Lower Fork Legs. Made in the U.S.A.

Includes progressively wound front fork springs and spacers. Perfect match to soup out the springs and spacers. Made in the U.S.A. Includes progressively wound front fork springs and spacers. Perfect match to soup out the springs and spacers. Made in the U.S.A.

Springs soak up small road bumps but are firm enough to absorb the big ones. Reduce front end dive during braking and improve overall ride performance. Kit includes components to lower bike 1" or 2". NOTE: Requires disassembly of forks. Springs soak up small road bumps but are firm enough to absorb the big ones. Reduce front end dive during...

Direct replacement for existing fork springs. Multi-rate fork springs eat small road bumps and are burly enough to handle big ones. Springs setup the bike for optimal cornering control and are tuned to prevent bike drive, unlocking the potential of your machine. Direct replacement for existing fork springs. Multi-rate fork springs eat small road...

Individual fork seals and dust seals for Yamaha motorcycle models. Note: Some models may have multiple part number options; check fork seal dimensions before ordering.

Restore your motorcycle's appearance and keep debris away from its fork seals. Kit includes two fork boots and installation hardware. Poly-bagged with K&S header card.

Features TTX technology from Moto 3, Moto 2 and World Superbike. Spring-pressurized system intended for track use only. Fits most large displacement bikes and is easier to maintain. Compact design with 8mm piston shaft. Includes a complete setting library and is delivered with three different spring rates.

A great performance upgrade that will improve handling, cornering and braking performance. The kit includes compression and rebound inserts and replacement fork top caps. Two sets of fork springs (5.5 N/mm and 6.0 N/mm) are included for your choice of performance. Requires use of Öhlins specialist tools (#60000-04) for installation.

Replacement seal kit for 43 mm Öhlins Road and Track forks. Replacement seal kit for 43 mm Öhlins Road and Track forks.

Optional fork springs for Öhlins NIX 30 Cartridge Kits. Sold separately to allow riders to change settings for individual preferences and weight.

Features Öhlins NIX technology, developed from high-level racing like WSBK. Provides external rebound, compression, and spring preload adjustment for individual preferences. Features new designed black top caps for a more subtle look. 30mm piston diameter. Easy to install and service. A wide range of spring rates are available and sold...

Stops leaking forks. Kits include a pair of oil seals, a pair of dust seals and wipers. Meets or exceeds OEM standards.

Give Cruiser bike front ends that custom lowered look by lowering the forks. Your choice of 1" or 2" lowering height is available at time of installation. To maintain properly balanced geometry, lowering the rear of the bike the same amount as the front is recommended. Installing a lowering kit will decrease initial ground clearance; motorcycle...

Progressive springs offer a soft initial spring rate for a plush ride. Progressively wound design provides increased resistance to bottoming as spring compresses. Improve handling while retaining OEM geometry. Sold in pairs. Made in the U.S.A.

Features progressive rate springs, high-performance pistons with deflective disc valving, and zinc-coated damper rods. Works with OEM forks and includes spacers for rider weight adjustment.

Converts archaic dual damper rod forks to true high-performance monotube dampers. Improves front end stability, cornering and bottoming control. Replaces all of the internal parts of the fork. No modification required to install. Converts archaic dual damper rod forks to true high-performance monotube dampers. Improves front end stability,...

Race Tech complete front-end suspension kit improves comfort and performance of damping rod forks. More than just a fork lowering kit, this kit comes with Race Tech Gold Valve cartridge fork emulators and high-performance springs. Also includes hardware to lower bike 1" or 2".

For street, track, and touring applications. These tunable valves sit on top of damping rods and are held in place by the main springs to make damping rod forks perform like well-tuned cartridge forks. Simple to install and tunable for all conditions and rider preferences.

Race Tech's original bolt-on fork valving system for front cartridge forks. This kit triples the flow area of pistons and puts valving control on the shim stack, resulting in outstanding tunability, improved control, traction, plushness, and bottoming resistance. Includes complete instructions, Gold Valve pistons, valving charts, valving shims,...

For select cartridge forks. For precision and control. Includes Rebound Gold Valves, all necessary hardware and instructions. For select cartridge forks. For precision and control. Includes Rebound Gold Valves, all necessary hardware and instructions.

Revolutionary low-friction design ensures high-quality suspension performance. Constructed of FEP and tin composite, these PTFE-coated bushings have the lowest friction properties available. Inner bushings mount on the inner (chrome) fork tube and have PTFE on the outside of the bushing; outer bushings mount on the outer (aluminum) fork tube and...

Precision-machined suspension shims. Resist permanent distortion, even in the most demanding conditions. For most shocks and forks. Sold in 10-pack.