Ideal's #552 heavy-duty 12V flasher. Ideal's #552 heavy-duty 12V flasher.

Works with Metric or European motorcycles that have non-momentary or momentary turn signal switches. Features automatic canceling, runs front and rear running lights, brake lights, and turn signals on single-filament bulbs or LEDs. Includes a built-in load equalizer and can run up to 70W per corner. Maintains push-to-cancel turn signal control and...

Gets rid of the large, unattractive sub-fender and huge license assembly. The integrated one-piece hidden mounting platform places your license on a sweeping angle, exposing more of your fat rear tire for an aggressive look. It includes a sculpted chrome license frame with integrated dynamic LED lighting. Recessed turn signal mounts allow use of...

Relocate and replace the bulky license plate mount and turn signals/brake light to bring them in tighter to the motorcycle. Made from sturdy, 12-gauge stamped steel, it features bright LED lights and slash-cut windows in a textured black powdercoat finish. Includes all hardware for a direct, bolt-on installation. Relocate and replace the bulky...

Eliminate the rear fender to give your bike a cleaner race-style look. Quality, all-stainless-steel kits move the turn signals up and in, and relocate the license plate light on most models. Some cutting and drilling may be necessary on some models, but only to the black plastic fender, never the frame or bodywork. Made in the U.S.A.

A dual-intensity design with 48 LEDs. Circles can be flush-mounted or mounted on the outside of a fender with longer studs to add a unique detail to bags or fenders. Includes amber lenses. Sold each. A dual-intensity design with 48 LEDs. Circles can be flush-mounted or mounted on the outside of a fender with longer studs to add a unique detail to...

License plate frames with six bright white license plate LEDs, flush-mount run, brake, and turn signal LEDs. Features 45 super bright red running/brake LEDs and 20 super bright amber turn signal LEDs per side. Available in flat style in black or chrome finish. Mounting hardware included.

Add a super-bright LED white running lights and amber turn signals to the end of your handlebars. 360° of illumination add safety and visibility. Six amber LEDs, six white LEDs per unit. Polycarbonate lens. White DRL LEDs are automatically deactivated when the turn signal lamp or hazard warning lamp is activated. Fit all 7/8" to 1" handlebars...

Utilize super-bright LEDs for an eye-catching red, amber or white/amber LED light. Measure 5/8" in diameter and mount in a 1/2" hole. 4' of wire for installation. Red LED Boltz are dual-intensity, 3-wire. Amber LED Boltz are single-intensity, 2-wire. White/amber are 3-wire with white running light and amber turn signal; requires converter PART...

Features 20 super-bright flush-mount dual-intensity red LEDs per side with six bright-white tag light LEDs. Comes in black finish and can be wired as run/brake/turn lights on motorcycles with rear 1157 turn signals. Mounting hardware included. Frame dimensions are 4 1/4" H x 7 1/4" W. Features 20 super-bright flush-mount dual-intensity red LEDs...

A compact, bright spot of light with six high-power single-function LEDs. Ideal for adding an extra brake light (red), extra turn signal (amber), or for license plate illumination (white). Simple two-wire connection. Measures 2.3" L x 0.45" W x 0.2" H. Sold each.

Fit any 12 to 16VDC systems with negative ground. Dual-color models feature three wire units, single-color models feature two wire units. Aluminum bullet housings with clear acrylic lenses. 45" leads are pre-pinned on dual color options for easy plug-and-play installation. Mounting brackets sold separately. Sold in pairs. NOTE: PART #s 2040-2708...

Mounting brackets for Micro Bullet turn signals. Fit any 3/8" bolt hole. Made from 0.12" thick aluminum. Sold in pairs.

Aluminum bullet shaped gloss black housing with sealed acrylic spherical lens maximizes LED light output for a bright spot of light. Three-wire units function as white running light with full contrast amber turn signal, no additional converters required. 45" leads are pre-pinned for use with optional wire harnesses available for plug-and-play...

An outer ring of 24 white ProBEAM LEDs showcase a smooth white halo that functions as a running light, while 12 center amber LEDs function as the turn signal. When turn signal is activated, the white LEDs turn completely off for the entire turn signal cycle. Housed in an aluminum bullet housing measuring 3.125" L x 2.25" D with a 5/16" - 18...

Features 24 amber dual-intensity turn, automotive-grade LEDs per unit. Housed in an aluminum bullet housing measuring 3.125" L x 2.25" D with a 5/16" - 18 mounting stud. Available in chrome or gloss black finish with amber lenses. DOT & SAE compliant. Sold in pairs. NOTE: Load equalizer may be required.

16 outer red LEDs illuminate as a smooth running light halo while 12 center red LEDs provide a full-contrast brake and/or turn signal light for maximum durability. Housed in an aluminum bullet housing measuring 3.125" L x 2.25" D with a 5/16" - 18 mounting stud. Dual-intensity. Sold in pairs. DOT and SAE compliant. NOTE: Load equalizer may be...

Features 24 red dual-intensity turn signal, automotive-grade LEDs per unit. Housed in an aluminum bullet housing measuring 3.125" L x 2.25" D with a 5/16" - 18 mounting stud. DOT and SAE compliant. Sold in pairs. NOTE: Load equalizer may be required. Features 24 red dual-intensity turn signal, automotive-grade LEDs per unit. Housed in an aluminum...

Replace stock signal lenses. Available in red and smoke. Sold in pairs.

A no load, no heat load equalizer that prevents rapid turn signal flash when factory turn signal bulbs are removed or replaced with LED. One module needed per motorcycle. Features adjustable load setting. Dimensions: 4.2" L x 0.6" W x 1.4" H. A no load, no heat load equalizer that prevents rapid turn signal flash when factory turn signal bulbs are...

Replaces stock 2- or 3-pin flashers on most metric bikes. Only one unit needed when replacing stock turn signals with LEDs on front and rear. Maximum 120W. Replaces stock 2- or 3-pin flashers on most metric bikes. Only one unit needed when replacing stock turn signals with LEDs on front and rear. Maximum 120W.

Designed to have running lights, brake lights, and turn signals all in one strip. Can be wrapped around a fender. Requires a run/brake/turn module. Dimensions: 14.6" L x 0.34" W x 0.30" H. Sold each. Designed to have running lights, brake lights, and turn signals all in one strip. Can be wrapped around a fender. Requires a run/brake/turn module....

Dual density flexible LED strips designed for use as running, turn, or brake lights. Features a unique faceted design for increased viewing angle. Pre-taped with automotive-grade tape and sealed with military-grade RTV. Strips have 36" copper wire and are 0.34" W x 0.30" H. Sold each.

An integrated light bar containing 10 amber left and right turn signal LEDs, plus 20 red run and brake dual-intensity LEDs. Features a smoke-tinted tube and measures 5.7" L. An integrated light bar containing 10 amber left and right turn signal LEDs, plus 20 red run and brake dual-intensity LEDs. Features a smoke-tinted tube and measures 5.7" L.

Designed to wrap around forks for 360° of coverage, operating as running lights and/or turn signals. Mounts with 3M™ automotive-grade tape and does not require fork dropping. Features amber LEDs in a choice of amber or smoke tubing. Sold in pairs. NOTE: May require a load equalizer if used as turn signals.