Projection lamp uses Hi-Power white LEDs for auxiliary lighting, interior lighting or driving lights. No warm-up, lights are instant on/off with a long life rated to over 50,000 hours. Features an oversized heat-sink and a cast aluminum body with stainless steel hardware. Standard two-wire connection to any 12VDC input. 18 Watts, 1.0 Amps, 1900...

Brite Lites are the industry leader in xenon gas-filled headlights, which produce a super-white HID-type headlight beam. High-quality replacement headlight bulbs; various exotic gases and coatings have been used to produce superior, super-trick lighting over standard, dull headlight bulbs. Choose from several wattages, colors and the most popular...

Universal LED taillight with two rows of 50mm SMD LED chips. The flexible design with 3M adhesive allows for direct application to smooth or curved surfaces. Features a gloss black finish and over 5' of cord in a protective black PVC jacket. Dimensions: 4 3/4" L x 3/4" W x 1/8" H.

Features a three-row spot beam and recessed flood beams on ends for wide light dispersion. Curved body design fits vehicles better and reduces wind noise. Features a DT connector, IP68 rated Military spec waterproof, and 10 to 32V operating range.

Features super-bright OSRAM LEDs in a heavy-duty aluminum housing with polycarbonate lens. Temperature control system warms lens to melt away snow/ice. Has a combo beam pattern and plug-n-play design.

Heavy-duty aluminum housing and polycarbonate lens with a 10° curve for maximum coverage and light distance. Features high-performance CREE LEDs, an 8° spot beam pattern, and is water- and dust-proof. Available in black Ops.

Features super-bright OSRAM LEDs in a heavy-duty aluminum housing with polycarbonate lens. Temperature control system warms lens to melt away snow/ice. Has an 8° spot beam pattern, plug-n-play design, and IP67 waterproof rating.

A dual-function running and brake light with a halo-style daytime running light. Also features a license plate light. Dimensions: 3 1/8" L x 3 7/16" W x 3/16" H.

Highest-quality, most durable LED light bar available. Features heavy-duty aluminum construction with polycarbonate lens and a unique design that allows for customization. Has an 8° spot driving beam pattern, 6000K color temperature, and is waterproof, dust-proof and vibration-resistant. Includes H1 harness.

Micro-sized, ultra-bright LED taillight with dual-function running and brake light. Features a license plate light. Dimensions: 2" L x 1 1/16" W x 1 5/16" H.

Features six ultra-bright LEDs to increase visibility. Includes a license plate light. Easy to install.

Small, bright and lightweight taillight. Dual-function LED light increases rear visibility. Easy to install.

A complete LED headlight housing replacement kit that converts halogen bulbs to an advanced projector LED design. It uses factory mounting hardware and wiring, consumes half the power, and provides twice the light of stock. High and low beam functions are retained. Lumen output is 2800 for low-beam and 3450 for high-beam. Each kit contains left...

30" universal Chase LED light bar kit with wiring harness and dash switch. Multicolor LED light bar with seven pre-programmed functions with a white back-up light. Increases visibility in trail dust or heavy fog/snow conditions. LED colors are red/amber/white/amber/red across the bar. 30" universal Chase LED light bar kit.

A post-mount cube light with black cast-aluminum construction. Features a Cree LED super efficient chipset with a 40W, 3A, 3500 lumen output and 180° dispersion.

For use with almost any 7-pin trailer wiring on a vehicle. Seamlessly integrates reverse lights without needing to splice into factory wiring. Plug-n-play install. Comes with a weatherproof DT connector. Works with all Speed Demon lights using a DT end. Works on cars with AMP connectors. Splitter addition (sold separately) will allow a two-light...

Wiring harnesses and mounting kits with all needed hardware and connectors to mount LED light bars on snowmobiles. Designed to connect to the Bright Lites Super Slim 8" LED light bar PART #2001-1741 (sold separately) and use the Hi/Low beam switch.

Ultra-bright dual-function design taillight that mounts to any flat surface with supplied hardware. Dimensions: 3 3/8" in dia. x 1 7/16" thick. NOTE: DOT and SAE compliant.

Die-cast aluminum housing with polycarbonate lens. Provides 1400 lumens light output. Available with a black-ops or chrome-ops reflector. DOT/SAE compliant. Sold in pairs.

A range of DOT/SAE compliant lights that feature high-powered CREE LEDs for a bright white light output. Easy, plug-and-play connector fits most machines. Housed in an aluminum body with a polycarbonate lens. Sold each.

Powerful pod-style light that illuminates in a spot beam pattern. A temperature control system warms up the lens to melt any snow or ice that may have accumulated. Features a 90° Flood beam pattern, 6000K color temperature, 4800 lumen output, and IP68 waterproof rating. Connects easily with H1 or H2 wiring harness (sold separately).

Sleek and low-profile design with an advanced temperature control system to warm the lens, melting away snow and ice for crystal-clear visibility. Features a polycarbonate lens, 90°/8° combo beam, and is IP67 and IP69K waterproof. Pigtail included.

Heavy-duty black aluminum construction with polycarbonate lens. Features an 8° spot beam pattern, 50,000 hour service life, and IP67 waterproof rating. Operating voltage is 10 to 30VDC.

A collection of wiring harnesses, connectors, adapters, and miscellaneous hardware for snowmobile lighting systems.

A wide variety of work and driving lights available in flood, spot, driving and combination styles.