Projection lamp uses Hi-Power white LEDs for auxiliary lighting, interior lighting or driving lights. No warm-up, lights are instant on/off with a long life rated to over 50,000 hours. Features an oversized heat-sink and a cast aluminum body with stainless steel hardware. Standard two-wire connection to any 12VDC input. 4 Watts, 0.3 Amps, 750...

Projection lamp uses Hi-Power white LEDs for auxiliary lighting, interior lighting or driving lights. No warm-up, lights are instant on/off with a long life rated to over 50,000 hours. Features an oversized heat-sink and a cast aluminum body with stainless steel hardware. Standard two-wire connection to any 12VDC input. 18 Watts, 1.0 Amps, 1900...

Works with Metric or European motorcycles that have non-momentary or momentary turn signal switches. Features automatic canceling, runs front and rear running lights, brake lights, and turn signals on single-filament bulbs or LEDs. Includes a built-in load equalizer and can run up to 70W per corner. Maintains push-to-cancel turn signal control and...

Gets rid of the large, unattractive sub-fender and huge license assembly. The integrated one-piece hidden mounting platform places your license on a sweeping angle, exposing more of your fat rear tire for an aggressive look. It includes a sculpted chrome license frame with integrated dynamic LED lighting. Recessed turn signal mounts allow use of...

Brite Lites are the industry leader in xenon gas-filled headlights, which produce a super-white HID-type headlight beam. High-quality replacement headlight bulbs; various exotic gases and coatings have been used to produce superior, super-trick lighting over standard, dull headlight bulbs. Choose from several wattages, colors and the most popular...

Relocate and replace the bulky license plate mount and turn signals/brake light to bring them in tighter to the motorcycle. Made from sturdy, 12-gauge stamped steel, it features bright LED lights and slash-cut windows in a textured black powdercoat finish. Includes all hardware for a direct, bolt-on installation. Relocate and replace the bulky...

Clean up the tail of the Honda Rebel with this side-mount, dual-function, run/brake LED design. The bracket is made from 12-gauge stamped steel with slash-cut windows and includes mounting hardware for direct bolt-on installation. Clean up the tail of the Honda Rebel with this side-mount, dual-function, run/brake LED design. The bracket is made...

Add visibility for safety and style. Spotlights come pre-installed on the lightbar. Just buy it, bolt it on and plug it in. Accepts stock turn signals. Made in the U.S.A. NOTE: Lightbars are designed for fitment on stock motorcycles. Installation of a windscreen may cause clearance problems.

Replacement bulb for Cobra spotlights. Replacement bulb for Cobra spotlights.

Eliminate the rear fender to give your bike a cleaner race-style look. Quality, all-stainless-steel kits move the turn signals up and in, and relocate the license plate light on most models. Some cutting and drilling may be necessary on some models, but only to the black plastic fender, never the frame or bodywork. Made in the U.S.A.

License plate frames with six bright white license plate LEDs, flush-mount run, brake, and turn signal LEDs. Features 45 super bright red running/brake LEDs and 20 super bright amber turn signal LEDs per side. Available in flat style in black or chrome finish. Mounting hardware included.

Has six bright white license plate LEDs and 45 super-bright flush-mount dual-intensity red running/brake LEDs. Available in a flat style with a black finish. Universal fit. Mounting hardware included. Plate dimensions measure: 4 1/4" H x 7 1/4" W. Has six bright white license plate LEDs and 45 super-bright flush-mount dual-intensity red...

Brake light containing 21 high-power dual-intensity red LEDs designed for maximum visibility. Brake will flash for approximately 6 seconds and then go solid until released. No load equalizer or resistors required. Dimensions: 7 1/2" L x 7/10" W x 7/10" H. Sold each.

Utilize super-bright LEDs for an eye-catching red, amber or white/amber LED light. Measure 5/8" in diameter and mount in a 1/2" hole. 4' of wire for installation. Red LED Boltz are dual-intensity, 3-wire. Amber LED Boltz are single-intensity, 2-wire. White/amber are 3-wire with white running light and amber turn signal; requires converter PART...

Features 20 super-bright flush-mount dual-intensity red LEDs per side with six bright-white tag light LEDs. Comes in black finish and can be wired as run/brake/turn lights on motorcycles with rear 1157 turn signals. Mounting hardware included. Frame dimensions are 4 1/4" H x 7 1/4" W. Features 20 super-bright flush-mount dual-intensity red LEDs...

Aircraft-grade 6061-T6 billet aluminum housing with a chrome finish. Features 120 Custom Dynamics Genesis II LEDs. Includes installation hardware for flush-mount or surface-mount applications. Aircraft-grade 6061-T6 billet aluminum housing with a chrome finish. Features 120 Custom Dynamics Genesis II LEDs. Includes installation hardware for...

A compact, bright spot of light with six high-power single-function LEDs. Ideal for adding an extra brake light (red), extra turn signal (amber), or for license plate illumination (white). Simple two-wire connection. Measures 2.3" L x 0.45" W x 0.2" H. Sold each.

Utilize Cree LEDs to produce a superior beam pattern with a super-bright white LED halo. Available in traditional clear or selective yellow polycarbonate lenses. Clear lens produces a white halo and beam for optimizing light output and distance, while yellow lens minimizes glare from harsh conditions. Easily mount to engine guards with ProBEAM...

16 outer red LEDs illuminate as a smooth running light halo while 12 center red LEDs provide a full-contrast brake and/or turn signal light for maximum durability. Housed in an aluminum bullet housing measuring 3.125" L x 2.25" D with a 5/16" - 18 mounting stud. Dual-intensity. Sold in pairs. DOT and SAE compliant. NOTE: Load equalizer may be...

Designed to have running lights, brake lights, and turn signals all in one strip. Can be wrapped around a fender. Requires a run/brake/turn module. Dimensions: 14.6" L x 0.34" W x 0.30" H. Sold each. Designed to have running lights, brake lights, and turn signals all in one strip. Can be wrapped around a fender. Requires a run/brake/turn module....

Dual density flexible LED strips designed for use as running, turn, or brake lights. Features a unique faceted design for increased viewing angle. Pre-taped with automotive-grade tape and sealed with military-grade RTV. Strips have 36" copper wire and are 0.34" W x 0.30" H. Sold each.

An integrated light bar containing 10 amber left and right turn signal LEDs, plus 20 red run and brake dual-intensity LEDs. Features a smoke-tinted tube and measures 5.7" L. An integrated light bar containing 10 amber left and right turn signal LEDs, plus 20 red run and brake dual-intensity LEDs. Features a smoke-tinted tube and measures 5.7" L.

Fits many cruiser models; mounts using matching chrome finish stud. Features a 55W H3 halogen bulb. Sold each. NOTE: DOT and ECE compliant. Fits many cruiser models; mounts using matching chrome finish stud. Features a 55W H3 halogen bulb. Sold each. NOTE: DOT and ECE compliant.

Smooth housing with a late-style stud mount. Uses a standard 55W H3 bulb. Sold each. NOTE: DOT compliant. Smooth housing with a late-style stud mount. Uses a standard 55W H3 bulb. Sold each. NOTE: DOT compliant.

Features a smooth chrome housing with a diamond-style clear lens and reflector optics. Includes a matching finish mounting block and H4 bulb. DOT compliant. Features a smooth chrome housing with a diamond-style clear lens and reflector optics. Includes a matching finish mounting block and H4 bulb. DOT compliant.