Improves performance by fine-tuning your carburetor. Includes Baron's adjustable needle, Mikuni main jets, replacement float bowl screws and the allen wrench to remove the stock needle. Specially engineered to work with high-flow air cleaners. Some kits may be supplied with Baron's BMX. Made in the U.S.A.

Unleash the 'War' in your Warrior with the Stealth Big Air kit. Dyno-tested horsepower and torque increase. Quickens acceleration and reaches speed much more rapidly. Aggressive look, sound and assertive. Includes unique relocation mount for ignition coils and FI sensors allowing clearance for the K&N hi-flow filters. Comes complete with K&N...

Unleash the 'War' in your Warrior with the Stealth Big Air kit. Dyno-tested horsepower and torque increase. Quickens acceleration and reaches speed much more rapidly. Aggressive look, sound and assertive. Includes unique relocation mount for ignition coils and FI sensors allowing clearance for the K&N hi-flow filters. Comes complete with K&N...

Includes Wideband O2 or Dual Wideband O2 sensors and control box. Plugs directly into the Power Commander. The kit automatically adjusts the fuel map while riding. Includes O2 sensor bungs.

Eliminates the need for a heavy, bulky exhaust servo motor and valve assembly when using an aftermarket exhaust. Keeps the FI light from coming on unless there is a 'real' problem with the bike's systems. Eliminates the weight of the fake 'valve', adds space for additional components.

Individual components and accessories for Dynojet and Keihin carburetors.

Allows for ignition timing curve based on throttle position and RPM, and to tune each cylinder individually. Ignition Module connects to PCV USB via a built-in expansion port link. Connects to the ignition coils through an intermediate harness connection. Direct coil driver technology allows for a high degree of flexibility in timing adjustments.

Real-time fuel adjustment. Displays channel data such as rpm, TP, map position (when using map switch), duty cycle, fuel exchange, ignition change and wideband air/fuel ratio (w/ WB2 or auto-tune connected). Weather resistant for use in all conditions. Log channels saved to internal memory and can be viewed/analyzed with Dynojet's Power Core...

A fuel injection tuning device with a compact design for discrete placement, allowing for easy upgrades and un-installs to revert to stock settings. Pair with other Dynojet accessories like the Autotune, Quickshifter or POD-300 for enhanced tuning. The analog input allows you to install any 0 to 5v sensor and build an adjustment table based on its...

Compact design for discrete placement and easy uninstallation to revert to stock settings. Easily change and upgrade tunes as you upgrade parts. Comes with Power Core software that connects dyno runs with our EFI Tuning Devices to unlock your ride's potential. Pair with other Power Commander accessories like the Autotune, Quickshifter or POD-300....

The Power Commander 6 PTI is the same great tool as the Power Commander 6, but is perfect for turbocharged or supercharged applications looking for precision, control and reliability. It features a pressure input table for 3D mapping capability based on boost vs. rpm, a software table providing 2D mapping capability with up to 50 points of...

Accessories for use with Dynojet Power Commander fuel management units, including map switches, autotune kits, and digital displays.

Plug-n-play fuel management device pre-programmed with make/model specific maps. Uses OEM-style connectors and high-quality wiring harnesses. Small, lightweight and easy to fit on the bike. No computer necessary to modify fuel management. Fully adjustable computer compatibility for ultimate tuning and personalization. Software is compatible with...

Allows you to activate a Power Commander for changing maps on the bike while disconnected from the bike. For limited use.

Allows you to activate a Power Commander for changing maps on the bike while disconnected from the bike. For limited use. Allows you to activate a Power Commander for changing maps on the bike while disconnected from the bike. For limited use.

Add functionality to your Power Commander V with the Secondary Fuel Module (SFM) or the Quick Shifter Expansion Module (QEM). The SFM allows for adjustment of an additional set of injectors, common on high-performance sportbikes. The QEM allows the Dynojet quick shifter sensor to be used on bikes with eight injectors. Made in the U.S.A.

Flash performance tunes via OEM diagnostic connector, no need to remove and send out ECU. Display vehicle data channels in realtime. Weather-resistant for use in all conditions. High-contrast display, viewable in direct sunlight. Fueling revised for maximum power and torque. Spark timing optimized for 91-93 octane fuel. Rev limit raised. Speed...

Secure and optimal mounting solution for the perfect placement while driving. Provides secure attachment for the Power Vision 3 fuel tuner. Mounts to handlebars up to 1 1/4". Made in the U.S.A.

Secure and optimal mounting solution for the perfect placement while driving. Provides secure attachment for the Power Vision 3 fuel tuner. Mounts to handlebars up to 1 1/4". Made in the U.S.A. Secure and optimal mounting solution for the perfect placement while driving. Provides secure attachment for the Power Vision 3 fuel tuner. Mounts to...

Unlock the true potential of the Dynojet Power Vision 3. Enables you to tune the original vehicle, perfect for retail/shop flashing. Each Power Vision 3 device will remember each license that is applied to it and will be able to flash any of these vehicles. Each license is vehicle specific, not device specific, which allows you to grow the tune...

Unlock the true potential of the Dynojet Power Vision 3. Enables you to tune the original vehicle, perfect for retail/shop flashing. Each Power Vision 3 device will remember each license that is applied to it and will be able to flash any of these vehicles. Each license is vehicle specific, not device specific, which allows you to grow the tune...

The Dynojet Quick Shifter (DQS) kit allows full-throttle, clutch-less upshifts in a fraction of a second. The Shift rod pressure/tension sensor kit is a universal sensor that can be used on a vast majority of motorcycles. Depending on the year/make/model configuration, it may require modification of gear-linkage tie rod. PART # 1601-0014 is a...

Easy plug-and-play installation. No computer necessary for adjustment. Intellishift technology adapts while riding.

Genuine Mikuni main and pilot jets for tuning VM, TM, and TMX series carburetors. Sold in packs of 4, unless otherwise noted.

Generation II wideband air/fuel system to be used with data logging systems such as a dyno or the Mobile Dyno feature from TechnoResearch. Includes controller, Bosch LSU 4.2 sensor and sensor bung. Includes two Bosch LSU 4.2 O2 sensors with the Direct Link tuner are required with this box. Interfaces directly with any TechnoResearch VCM-TR3...