Fully insulated, waterproof, windproof and breathable long-gauntlet chassis gloves with 3M™ Thinsulate™ insulation (200g top hand/thumb, 100g palm/fingers), a waterproof Hipora® membrane, and pre-curved finger design. Features an adjustable wrist and cuff, a top hand pocket for a heat pack, and 3M Scotchlite™ reflective graphics.

Connection accessories for use with GEN-X3 and GEN-X4 heated apparel.

Controls heat output of GEN-X3 and GEN-X4 heated clothing. Features a variable controller with a built-in rotary on/off switch. Dual LED displays and dual outputs offer independent temperature control for two articles of GEN-X heated clothing. Each output is able to control up to four interconnected articles (total power not to exceed 10A)....

Controls heat output of GEN-X3 and GEN-X4 heated clothing. Features a variable controller with a built-in rotary on/off switch, and an LED display for on/off and heat setting. Able to control up to four interconnected articles of GEN-X heated clothing (total power not to exceed 10A). Includes overload, short circuit, and reverse polarity...

Used to power GEN-X3/GEN-X4 heated gloves or glove liners without a GEN-X3/GEN-X4 heated vest or jacket. Built-in temperature controller allows you to choose from seven distinct heat levels. An LED light indicates whether the heat is on or off. The Y-cord is long enough to pass underneath a motorcycle jacket and through each sleeve. A clip-on hook...

Lightweight EVA foam construction for warmth and comfort with an anti-slip material on the bottom to keep them in place. A carbon fiber heating element covers almost the entire foot area for even heat distribution. Provides 14.5W of heat while drawing 1.2A per pair. Easy to install and remove for use in any boot. Can be trimmed to fit most boot...

Comfortable 85% polyester, 15% Lycra® liners fit snugly under existing windproof and waterproof gloves or mitts. Heating elements warm the entire length of each finger and thumb. Connects to a 12V power source, providing 27W of heat and drawing 2.2A. Note: GEN-X3 and GEN-X4 are fully compatible.

Extremely comfortable socks made with 85% polyester and 15% Lycra®. ZEPTO® fiber heat technology covers the entire foot area, providing uniform heat on the top and bottom of toes. Custom-fit design for left and right feet, designed to fit under tall or short boots. Note: GEN-X3 and GEN-X4 are fully compatible.

Flexfit design for multipurpose use, made from windproof microbacterial technical fabric with Lycra® side panels for movement. Designed to be powered by a 12V battery and includes a 20" battery cord. Features two front side pockets, a snap-on electric connection on the back for connecting gloves, and two input connections for independent...

Soft, drum-dyed leather construction with an extra-long gauntlet and hook-and-loop closure. Elements heat the entire length of each finger, thumb, and back of hand. A windproof, waterproof, and breathable Porelle® insert keeps hands dry. The pair of gloves produces 29W of heat and draws 2.1A. Can be plugged directly into GEN-X4 jacket liners....

Windproof, waterproof polyester main body construction for maximum warmth. Side panel features dual-layer construction; Lycra® (inner) and breathable cotton/Lycra blend (outer) allows moisture to escape while retaining heat and a snug fit. The entire liner is heated, including the back and collar. Connects to a 12V power source with the included...

Heating elements throughout the gloves, including to the tip of every finger, provide non-stop heat up to 57 °C (135 °F). Connects directly to your vehicle's DC power system. Features high-impact TPU knuckle protection, adjustable hook-and-loop wrist closure, PrimaLoft® Silver 80g insulation, and touchscreen compatibility. Equipped with a...

Can be easily installed in minutes as a plug-in for a visor kit. No tools are required for installation, simply remove the old plug and replace it with this new one. Wiring harness included and comes with everything you need to connect the heated visor to your vehicle. Instant heating and no waiting around for heat to build up before using your...

A durable, windproof, and waterproof 3-season riding jacket with a built-in removable heated jacket liner that can be worn with or without the protective outer shell. This jacket plugs directly into your vehicle's 12V electrical system and features seven Microwire™ heating zones (collar, chest, sleeves, and back). It is constructed with a...

Features a removable 12V heated pant liner with connections at the bottom of the pant cuff for heated socks or insoles. It has an Aquatex™ breathable waterproof G-Liner membrane in the outer shell with a durable water-repellent (DWR) finish. The pants have four Microwire™ heating zones for legs and hips, direct ventilation on the thighs,...

Features a high-impact floating TPU knuckle, reinforced palm and fingers, and a pre-curved ergonomic fit. Made from premium cowhide leather with 150g insulation. Includes Microwire™ heating throughout the glove to the tip of every finger and an Aquatex™ breathable water-resistant membrane. Max heat: 57°C (135°F). Power: 12VDC @ 1.1A each....

Made with 100% aniline leather construction and feature Microwire™ heating throughout. Includes an Aquatex™ breathable water-resistant membrane, 150g Thinsulate™ insulation, and impact-protected gel pads at the palm. Features reflective piping and an adjustable hook-and-loop wrist closure. Plugs directly into a Gerbing jacket liner. Max...

A wind-resistant nylon chassis liner with taffeta lining designed to be worn as a mid-layer under a protective jacket. Features seven Microwire™ powered heat zones in the collar, chest, sleeves, and back that come to full temperature in seconds. The liner also serves as a connection point for Gerbing heated gloves, pants, and socks, with...

A wind-resistant nylon chassis liner with taffeta lining, designed to be worn close to the body under an outer jacket. It features seven Microwire™ heat zones: collar (1), chest (2), sleeves (2), and back (2). The liner serves as a 'home base' for Gerbing heated gloves, pants, and socks with pre-wired connections at the hemmed-cuff sleeves....

Constructed of windproof, durable, mini-ripstop nylon fabric, these pant liners feature four Microwire™ heating zones in the leg and hip. They can connect to an EX Pro jacket or jacket liner to create full-body warmth. Connections at the hem of each pant leg allow for connecting heated socks and insoles. A temperature controller is recommended....

Designed to be worn close to the body, under an outer jacket and over a thin polyester base layer. Features a mini ripstop nylon shell with a droptail back for improved coverage. Equipped with five Microwire™ heating zones: collar (1), chest (2), and back (2). Includes YKK® zippers and a pre-wired connector for pant liners. A temperature...

Constructed from aniline cowhide leather with 150g Thinsulate™ insulation and a high-impact floating TPU knuckle. Features a Superfabric palm/finger, pre-curved ergonomic fit, and Microwire™ heating throughout to the tip of every finger. Includes an Aquatex™ breathable water-resistant membrane, reflective piping, gel pads at the palm, and an...

Battery-heated gloves with Microwire™ heat technology and full front-and-back heating to the fingertips. Features a premium outer shell with Cyberian Cordloc system, Aquatex™ breathable water-resistant membrane, and Thinsulate™ insulation (40g top of hand, 40g palm). Includes a three-level on-board controller, two 7V batteries, and a dual...

A comfortable knit fabric hoodie with a powerful Microwire™ heating system, including 3 built-in heating panels on the chest and upper back. It features touch-button control, two pouch pockets, a hidden battery pocket, and a drawstring hood. The hoodie has ribbed cuffs and hem and is machine washable on a gentle cycle. Operates on 7V battery...

Features full front-and-back heating to the fingertips, a premium leather outer shell, and Microwire™ heat technology. Small reinforcement layers on fingertips provide extra grip and abrasion resistance. Index finger is conductive for smartphone use. Includes an Aquatex™ breathable water-resistant membrane and highloft insulation. Provides up...