All Products

A quick-change design mountain strap that allows you to lower the handle when not in use, ideal for cross-over sleds. Adds another grab point for side-hilling and features a rubber overmolded handle with embossed grip. Silicone rubber stays flexible to -40 °C. Made in the U.S.A.

Offers enhanced hand protection from the elements. Designed to be used with existing handguard systems or independently.

Features PVC Rox logos on top and front. Mounts to any motorcycle, dirt bike, ATV or snowmobile with an open bar clamping area.

Universal grip strips that provide aggressive traction and a more level-feeling platform on virtually any running board with a large, flat surface. Made in the U.S.A.

An accessory for PowerMadd Star Series handguards that adds significantly more wind protection while maintaining the original aesthetics. Creates a larger pocket of protection, which is ideal for late-model sleds with minimal windshields. Made from durable cross-link foam with a Cordura-type skin. Sold in pairs.

A selection of high-quality handlebar risers from Rox Speed FX, including anti-vibration, height-adjustable, and pivoting models. Engineered from CNC-machined 6061-T6 aluminum to allow riders to customize their handlebar position for improved comfort and control. Made in the U.S.A.

Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position. Engineered and tested for maximum strength and durability. CNC machined from billet 6061-T6 aluminum, then anodized for long-lasting good looks. Made in the U.S.A. Note: Longer cables may be required when installing handlebar risers on some models.

Unique design allows for installation in either direction. 1" offset means bar can be moved closer or further away. Reducers lock into risers to ensure no slippage between components. Risers have an oblong hole so that they will fit virtually any fore and aft bolt center-to-center distance with 8 mm bolt threads. Made in the U.S.A.

Durable black plastic, ISOC-approved, and race legal number plates for snowcross racing. Available for front and rear applications. Rear plates include rivets.

Made from an extremely unique, flexible, weather-resistant, and durable material. The handguards' expanded coverage and swept-back design provide extreme weather protection and keep the hand area warm. They will not crush, deform, or warp under any condition, including rollovers. Requires RSI handguard mounting.

One-piece 7" grips featuring an ultra-tacky diamond surface that is soft and comfortable. The durable rubber compound lasts longer, offers increased comfort, and is compatible with hand warmers. These grips fit over RSI aluminum and steel handlebar hooks as well as other handlebars with pre-bent hooks. The thinner rubber design provides a smaller,...

Gives the handlebar a cleaner, more streamlined look and allows more room for mounting handguards, mountain bars, GPS, etc. Uses the stock or optional momentary billet kill switch; the stock engine stop switch is relocated to the front of the handlebar to help prevent accidental deployment. Uses the OEM throttle lever pivot pin safety switch,...

Direct OEM replacement for stock cables. A must-have for taller handlebar risers or wider handlebars. Features stainless steel braided top sections for a custom look, rubber seals at critical joints, and is 8" longer than stock.

Self-adhesive grip tape that fully wraps handlebars and hooks for a seamless finish. Features high-traction outer synthetic rubber that stays grippy even when wet or cold. Integrated Zorbicon® gel absorbs vibration for a smoother, more comfortable, and secure grip. Measures 46 1/4" long to accommodate all grips with over-the-hook handlebar...

Installs in minutes using a hair dryer. Incredibly tough, will not fall apart during installation of grip. Contains an adhesive, activated during the shrinking process, that ensures no movement after fit to bar. Works on all types of handlebars, including hook style. Works with all aftermarket and OEM grip heaters. Sold in pairs. Made in the U.S.A.

Super-strong grip adhesive is heat resistant up to 121 °C (250 °F). Works on rubber and plastic grips and with grip heaters, a must for RSI High-Power Heaters. Easy double bubble pack dispenses equal amounts for a perfect mix ratio. Contains enough adhesive for one pair of grips, even 8" long grips.

Kits contain a pair of stub hooks and a pair of 7" grips. Hooks extend the handlebar for a more comfortable feel when leaning off the snowmobile for technical riding. The 7/8" outside dimension of the hook is the same size as the handlebar, allowing extended-length grips to be installed over the top for a seamless feel. Made in the U.S.A.

Extends the handlebar for a more comfortable feel when leaning off of a snowmobile. Easy bolt-on design allows extended-length grips to be installed over the top for a seamless feel. The 7/8" outside diameter is the same size as a handlebar diameter for an even seam. Sold each.

Molded foam handlebar pads with a 3D-molded rubber cover, designed to protect the rider from sharp bolt edges on handlebar risers. Built to withstand below-freezing temperatures without cracking or separating.

A variety of handlebar risers and adapters from RSI, constructed from 6061-T6 aluminum. Includes pivoting risers, adjustable risers, angled risers, and pivot adapters to customize handlebar position for snowmobiles.

Handlebar-mounted push-button engine kill switches constructed of 100% waterproof billet aluminum. The push-down-and-hold function prevents accidental shutdown, and the momentary action springs back to run automatically when not pushed down. Custom waterproof heat shrink/epoxy wire connectors are included. Made in the U.S.A.

Optional heating kits designed for use with the RSI Phone Bar Pad to maintain phone operation in cold weather.

Work with stock OEM connectors. Heat up faster and hotter than stock, making them essential for keeping grips hot when using aluminum handlebars. Features a simple plug-and-play installation requiring no wire cutting and easy installation with 3M™ self-adhesive backing. Available in both standard rectangular and extended hook design shapes. The...

Mounts a rider's phone in the perfect position for easy use and completely protects it from the elements, making it ideal for both street and off-road use. Features a clear screen cover that allows for touchscreen operation. Universal mounting for various handlebar sizes.

6" longer than stock brake lines, manufactured from high-quality PTFE line and stainless steel braided hose. Features a clear UV outer hose protector and triple-corrosion-resistant swivel fittings. Made in the U.S.A.