All Products

Oil filter adapters and associated components including thermostatic bypass valves and service kits. The adapters allow oil bypass until operating temperature is reached.

Give your Jagg oil cooler a racy look with this performance braided oil hose kit from Susa's motorsport division. The kit includes 6' of bright stainless steel braided hose, two aluminum hose separators, and four aluminum hose finishers with integrated worm-drive clamps. Easy installation. Made in the U.S.A. Give your Jagg oil cooler a racy look...

Service kit (repl. gasket) for oil filter adapter PART #s J4600 and 0713-0031.

Low-mount, high-performance, powder-coated gloss black oil coolers. Perfect for the fabricator, customizer and racer. Same oil coolers that are used in all Jagg oil cooler kits. Made in the U.S.A.

Features a high-performance 10-row oil cooler kit with an integrated fan. Designed for low vehicle speeds and stop-and-go traffic. Includes cooler, sealed-motor fan, oil hose, mounting hardware, automatic thermal fan switch wiring harness, and offset oil filter adapter.

Vertical frame-mount oil cooler kits featuring cutting-edge technology to keep engines cool. Kits include hoses and clamps. Available in 6-row and 10-row configurations.

James rocker gasket kits come complete with all required inner, upper and lower rocker box gaskets, plus bolt washers. Made in the U.S.A.

Reinforced synthetic rubber. 5-speed version fits 5-speed transmissions and includes speedo drive block-off with a chrome-plated cap screw and washer.

Fit between the rear seat mounting bracket and fender to prevent bracket from scratching the paint. Sold in a 20-pack.

Uses the factory wiring connectors for a true plug-n-play installation. Works with factory handlebar controls or optional wired remote. Waterproof unit face (XPX6) and rear chassis (IPX5). Bluetooth® streaming audio (A2DP, AVRCP) allows playing music stored on a Bluetooth-equipped phone or MP3 player.

Maximum power output: 160W (4 x 40W). Receives Bluetooth® streaming audio and controls Bluetooth-enabled devices. 7-channel NOAA Weatherband tuner. Waterproof. Multiple mounting capabilities: front flush mount, rear flush mount and surface mount with AMPS pattern.

180W max power (45W x 4); 100-watt RMS (25W x 4). Features a water and UV resistant front panel, 2-wire power with non-volatile clock and memory support, toggle switches between night and day display, and Bluetooth streaming audio. Includes a low battery alert, work timer, PA microphone input, and amplified remote trigger. It has a...

180W max power (45W x 4); 100-watts RMS (25W x 4). Features a water and UV resistant front panel, 2-wire power with non-volatile clock and memory support, and toggle switches between night and day display. Can be turned on with remote and includes a low battery alert and work timer. It has one rear USB port for device charging, seven NOAA...

A 12VDC mini radio with an AM/FM electronic tuner and front/rear AUX-in for various devices. Listen via Bluetooth-enabled headphones or the built-in 15W stereo amplifier. It works with most factory speaker/antenna systems. Features a 7-channel NOAA weatherband tuner with Weather Alert, and a 2-wire connection to prevent battery drain. The clock...

180W max power (45W x 4); 100-watts RMS (25W x 4). Features Bluetooth streaming audio, seven NOAA weatherband frequencies, and an AM/FM tuner with 30 presets. It includes audio settings for volume/bass/treble/balance/fade, toggle switches for night and day display, a daylight-readable segmented LCD, a low battery alert, and a work timer. 2-wire...

50W max power (25W x 2); 20-watts RMS (10W x 2). Features a water and UV resistant front panel, Bluetooth streaming audio and hands-free calling. 2-wire power with non-volatile clock and memory support, and can be turned on with a remote. Includes a low battery alert, work timer, one rear USB port, and seven NOAA weatherband frequencies. Also has...

Shifting assembly reduces shifter free play. Includes plate, spring, pawl plate, shifter shaft, and associated hardware. Made in the U.S.A.

Precision-machined 6061 billet aluminum transmission top covers. Designed for direct replacement with no modifications or clearancing required. Kit comes complete with gasket and hardware.

Micro-finish bore allows a running fit of 0.0002". Big Axle rollers are designed around three working parts. Outer wheel/roller has 27% greater wall size. Axle size is increased 36% and doubles as the inner race.

Ensures proper clutch operation. Made in the U.S.A.

Top-quality replacement sensor. Also works on any aftermarket transmission case with a speedometer sensor hole. Includes O-ring, hardware and OEM connector. Made in the U.S.A.

Cooling system for Big Twin bikes that reduces operating temperatures up to 100°F. Features a high-tech waterproof cooling fan, automatic temperature switch (140°F), and includes a built-in quality OEM-type replacement horn. Mounts to horn location.

Repositions and mounts the coil below the neck and in between the frame down tubes on the front of the bike. Kit includes all necessary mounting hardware along with extended spark plug wires.

Manual compression release valves to aid starting high-compression, big-inch motors. Requires drilling and tapping heads (10 mm x 1.0 mm). Self-sealing.

The cure for a loose transmission pulley. Includes machined clamping face tolerance, along with additional locking holes for a more precise and secure way to secure pulley nut. Made in the U.S.A.