All Products

Convert single-function Joker Machine LED lights into run/turn or run/brake/turn lights. Converter designed to hide in-line on factory wiring.

Billet style replacement stock cast covers. Fully CNC machined from 6061-T6 aluminum. Available in hard black anodized or chrome-plated finish. Includes hardware.

CNC machined from 6061 billet aluminum. Strong, yet lightweight, two-piece construction. Serrated for exceptional grip. 360 degree footpeg adjustment. Pitch adjustment screw for a level riding position. Dimensions: 5" long, 3" wide.

Flush-mounted design cleans up the look of Joker Machine hand controls after you remove the stock mirrors. A must when using bar-end type mirrors. Fully CNC machined from 6061-T6 billet aluminum, then black anodized. Sold each. Made in the U.S.A. Flush-mounted design cleans up the look of Joker Machine hand controls after you remove the stock...

Classic builder-inspired design. Great for mounting upside down. Direct bolt-on for Harley-Davidson hand controls. Mirror head swivels on a corrosion-free stainless steel ball joint. CNC-machined from 6061 billet aluminum. Sold each. Made in the U.S.A.

Classic builder-inspired design, great for mounting upside down. Direct bolt-on for Harley-Davidson hand controls. Mirror head swivels on a corrosion-free stainless steel ball joint. CNC-machined from 6061 billet aluminum. Sold each. Made in the U.S.A.

Solid, simple, adjustable original café style mirrors. Great for mounting upside down. Mirror heads can be locked in place or adjustable. Features 3.7" x 2.25" café style convex mirror glass. CNC machined from 6061 billet aluminum with hard black anodize or chrome-plated finishes. Adapter available separately for metric models. Made in the U.S.A.

Fully CNC-machined side mount that makes relocating your speedo a snap with no wiring required. Drop the speedo and indicator unit in the side mount and you're done. Visibility over the handlebars is greatly improved. Made in the U.S.A.

Available in a variety of designs. Chrome-plated or anodized billet aluminum finish with silver accents. Includes mounting screws. Made in the U.S.A.

Two-piece claw clamp separates and mounts without having to drop the fork tubes. Super-bright single-function 18 mm amber 12V LED lights. CNC machined from billet aluminum. Small aluminum minimalist bodies give the lights a low-profile look. Includes plenty of wire for mounting above the lower triple tree. Sold in pairs.

CNC machined from solid blocks of 6061-T6 billet aluminum with a pitch bolt mounting design for a clean look. Can be mounted either inward or outward from the fork tubes. Features super-bright amber LED lights, 1 1/2" wide, 1/2" tall. Lights are set at a 25° angle for standard H-D forks. Sold in pairs, made in the U.S.A.

Universal mount LED turn signals. Mount to any 5/16" or 8 mm hole. Super-bright LED lights measure 1 1/2" W x 1/2" tall. CNC-machined from 6061-T6 billet aluminum with wire feed out of the center of the mounting bolt. Turn signal dimensions: 2" L x 1" W x .85" H. Sold in pairs, made in the U.S.A.

Fully CNC-machined from 6061-T6 aluminum. Superstrong, yet lightweight one-piece construction. Installs easily to most stock H-D shift arms with a threaded 5/16”-24 mounting hole (replaces the stock rubber unit). Made in the U.S.A.

Fully CNC machined from solid 6061 T-6 billet aluminum. Comfortable serrated foot surface area gives a good bite onto the shoe bottom.

CNC machined from solid 6061-T6 aluminum. Super-strong yet very lightweight design. Comfortable serrated foot surface area gives good 'bite' to the bottom of the boot. Exclusive pitch adjustment allows you to change the angle of the floorboard so it sits in a 'level' riding position. Dimensions: 13.5" L x 4.75" W. Black anodized finish.

All-billet aluminum serrated footpegs. Fully CNC machined from solid 6061-T6 bar. Super-strong yet lightweight two-piece construction. Comfortable serrated foot surface area for a good bite. Full 360° footpeg rotation. Features exclusive pitch adjustment screw. Hard black anodized finish. Sold in pairs. Made in the U.S.A. All-billet aluminum...

Housings are CNC machined from billet aluminum with a black finish. Each signal has DOT approved 18 mm amber LEDs. Exceptional beam angle. Single-function design (can be converted). Side-mounted, wires exit from the back of the signal housing. Compact design measures 1.5" L x 0.875" square; stands off the bike 1.2" when mounted. Mount to any 5/16"...

A thicker dash insert with more contours and a stylish raised teardrop section that wraps around the speedometer and ignition lock. Chrome-plated billet aluminum. Fits over the OEM dash; 7/16" indicator lamp slot. Made in the U.S.A.

Hot Rod look speedometer relocation bracket with Easy Mount Clamp that allows mounting without removing the fork tube. Fully adjustable in virtually every direction. Retains 100% instrument lighting. Speedo wiring plug is retained without extending the harness.

Mounts without the removal of your front wheel or any disassembly of the front forks. Black anodized finish. Use Joker Machine's Indicator Clamp to mount your stock indicators. Made in the U.S.A.

Fully CNC-machined from solid bar for optimum quality. The whole assembly mounts to the left fork tube and is adjustable in virtually every direction and clears the fuel tank easily. Outer housing enables you to retain 100% of all of your instrument lighting and is conveniently located around the right side of the speedo. Features LED indicator...

Machined from billet aluminum with a chrome-plated or polished hard black anodized finish. Stainless steel heim joints at each end for the ultimate in corrosion resistance. Chrome hardware included. 5/16" mounting holes; adjust from 12" to 13" center to center. Made in the U.S.A.

CNC-machined from billet aluminum with dual-function 18 mm amber LED lights. Exceptional beam angle.

CNC-machined from billet aluminum. Black anodized with machined silver accents. Easy to install; replaces stock door. Reuses OE mounting hardware and lock. Made in the U.S.A.

Joker’s upper handlebar riser clamp gives your bike a racer look. Replaces stock H-D Nightster’s top clamp with the built-in 'speedometer ring' mount – a perfect bar clamp solution when using Joker’s speedo sidemount assembly. Fully CNC-machined racing-styled design is made from solid 6061-T6 bar stock for maximum strength. Available with...