All Products

Deeply contoured front bucket and passenger seat that angles forward to support the rider's back. Features a premium-quality expanded vinyl cover and a removable, contoured driver backrest that folds forward for easy access, pivots, and adjusts for height and position. Made in the U.S.A.

Rear seats designed to match the Wide Tripper Solo Seat. Features detailed stitch work in highly durable, synthetic glove-leather cover and a marine-grade fiberglass baseplate. 11.5" width. Made in the U.S.A.

Seat design lets you ride low and still be comfortable. Detailed stitch work in the highly durable, synthetic glove-leather cover. Marine-grade fiberglass baseplate.

Seat design lets you ride low and still be comfortable. Cut narrow at nose for better ground reach. Fully adjustable driver backrest is easily removable without tools.

Seat design allows riding low while remaining comfortable. Features detailed stitch work in a highly durable, synthetic glove-leather cover and a marine-grade fiberglass baseplate. 13" width. Made in the U.S.A.

High-quality expanded vinyl cover with detailed diamond-stitch pattern. Backrest is fully adjustable, easily removed and built directly into the seat. Includes chrome hardware and mini fender bib. Note: Will not fit with stock passenger seat or handrail.

Heavily walled and adhesive-lined heat shrink tubing to keep splices dry. Works well for battery lugs or aftermarket ignition switch terminals. Comes in 4' lengths and is sold in a 4-pack. Made in the U.S.A.

A marine-grade, key start ignition switch for custom applications. Features a stainless steel knurled jam nut with a polished finish and includes two keys and brass screws. A marine-grade, key start ignition switch for custom applications. Features a stainless steel knurled jam nut with a polished finish and includes two keys and brass screws.

Stubby antenna available in rubber or aluminum with carbon fiber insert. Fits any H-D models with existing audio antenna. Direct plug-in installation.

1/4" female quick-disconnect matches OEM that is used on rear brake switches and horns. Sold in 10-packs. 1/4" female quick-disconnect matches OEM that is used on rear brake switches and horns. Sold in 10-packs.

Kit includes 1-position plug, receptacle and one male and one female crimp terminal. Used to replace the male and female connectors that are found on the regulator. Designed to save time and labor.

An inexpensive way to connect wiring. Fully insulated PVC construction. Available for 18 to 22 gauge or 14 to 16 gauge wiring. Sold in 25-packs.

Disables the neutral indicator light. Made from highly polished, stainless steel with a 1/4" blind hex head tightened from inside the trans top cover. Made in the U.S.A.

An inexpensive way to connect wiring. Fully insulated PVC construction. Sold in 25-packs. An inexpensive way to connect wiring. Fully insulated PVC construction. Sold in 25-packs.

30-amp starter relay easily handles high-current draw. Made in the U.S.A.

Front turn signal tap for adding additional front turn signals. Plug-n-play. Made in the U.S.A.

Allows the use of exhaust systems with 18 mm O2 sensor bungs to be used with late model bikes with 12 mm O2 sensors. Reduces the 18 mm O2 bungs to 12 mm O2 bungs found on select 10-17 models. Wiring harness comes pre-assembled with connector pins.

Allows you to bypass OEM O2 sensors when changing from the stock exhaust.

Includes all handlebar switch wiring, speedometer extension and twist grip assembly. Twist grip assembly includes adjustable PVC jacket for handlebar or riser wiring exit. PVC wire loom keeps round shape. All wiring is covered with smallest diameter loom required for a clean, professional look when installed.

Add additional running, brake and turn signal lights to the rear of your motorcycle. Plug-n-play (unless noted). Includes all the wiring and heat shrink required. Made in the U.S.A.

Pre-installed terminals that utilize MIL-SPEC crimping presses. Hardwired, like OEM CVO versions, from the sensor to the main connection on the harness. 100% plug-n-play. Made in the U.S.A.

Five-wire relay socket. Replaces OEM # 72046-79 and 9937. Made in the U.S.A.

Everything needed to connect the wiring on your OEM or aftermarket Tour-Pak to your motorcycle. Plug-n-play installation with quick-disconnect feature.

Utilizes the OEM Tour-Pak connector and a quick-disconnect wiring harness. Connects H-D or aftermarket wrap-around light bars and side marker lights for the 14-24 King Tour-Pak. Made in the U.S.A.

A universal USB charger that simply plugs into any cigarette lighter port or can be used with a NAMZ Power Port for an additional power source. Essential for keeping devices like cell phones and MP3 players charged on the go. Charging cable not included. A universal USB charger that simply plugs into any cigarette lighter port or can be used with...