All Products

Super-lightweight, powerful 112 dB at 2.7A horn. Features a weather-resistant cover. Easy installation with included instructions. No wiring harness required. Super-lightweight, powerful 112 dB at 2.7A horn. Features a weather-resistant cover. Easy installation with included instructions. No wiring harness required.

For Yamaha XV1600/1700 Road Star 99-07. With this adjusting your bike's air/fuel mixture screw has gone from an easy-to-get-burned finger job to a snap. Allows for easy-to-reach, tool-free tuning for weather and altitude. Enhances fuel efficiency while improving low-speed drivability. Do away with tiny screwdrivers and crawling around on your...

Allows the use of -6AN fittings and fuel line for fuel supply. Used with Pingel fuel valves (sold separately). Solid brass.

Electronically suspends the ignition system to allow smooth shifting up or down with the push of a button. Clutch used only for starting or stopping. OEM shifting ability retained. Includes dual-button handlebar control, chrome plated shift cylinder, support bracket, control module, and ignition kill module.

Manufactured from stainless steel with the exposed end polished so it will match the chrome shift lever. Designed to prevent shift linkage drag and lockup for OEM models without grease fitting on primary case. Will accept any stock or aftermarket shift lever that fits the stock shaft. Made in the U.S.A.

High-flow custom fuel filter available in an aluminum machined satin or chrome finish. High-quality O-ring for a leak-proof seal. Cleanable, reusable 40 micron filter element. Works great with Pingel's high-volume gas valves. Made in the U.S.A.

An affordable way to relocate the antenna down low and out of the way of the detachable luggage rack or the Tour-Pak on radio-equipped baggers. Kit includes all hardware and polished stainless steel bracket. Mounts to the rear fender support brackets; may fit on some models with saddlebag fillers. Made in the U.S.A.

Valves feature a brass body with show-quality chrome-plating. Substantially higher fuel flow compared to OEM or aftermarket fuel valve. Necessary for adequate fuel delivery even on stock motorcycles and a must for high performance. Available with 3/8" NPT or 22 mm external threads. Adapter nut included on 22 mm threaded valves. Made in the U.S.A.

Designed to stop a runaway motorcycle if the rider is separated from it. Billet aluminum body, water-resistant switch, stainless internal components with 24" copper wire for dependable operation. For normally closed battery-type ignition. Made in the U.S.A.

Noise reduction rate of up to 24 decibels, helping to protect your hearing from wind and engine noise. The integrated precision filter reduces wind noise while allowing normal conversation without filtering important traffic sounds. Made from medical-grade silicone-free material, providing a comfortable fit for extended wear. Filters are...

Stops leaking forks. Kits include a pair of oil seals, a pair of dust seals and wipers. Meets or exceeds OEM standards.

Exact OEM replacement bearing and seal kits that restore steering and braking control lost due to worn or rusted wheel bearings. Each kit includes the necessary bearings and seals to completely rebuild each hub. Features double-sealed ball bearings to keep moisture and contamination out and seals that ensure proper fitment.

Made to match the Spyder, this hand-stitched marine-grade vinyl pouch with water-resistant zippers keeps your stuff secure and dry. It's like having an extra pocket right where you need it. Measures 9 1/2" x 9" x 2". Made to match the Spyder, this hand-stitched marine-grade vinyl pouch with water-resistant zippers keeps your stuff secure and dry....

Protects and polishes all clear and colored plastics, as well as most painted surfaces. Highly effective at cleaning and polishing lenses and shields. Originally developed for professional aviation applications. Plexus® envelops dirt and dust particles, then lifts them from the surface to avoid scratching. Protects by sealing the pores of the...

Impact-resistant plastic design fits snugly around spare spark plug. Perfect for fanny pack or fender bag. Keep plugs clean and gapped. Sold in pairs. Plug carriers

An industry-first 222° 2-into-1 heat shield system covers unsightly welds and connections for a great look. The HP system features a chromed 3 3/4" muffler body with a delicately machined chromed billet tip. A proprietary internal cooling system ensures a long-lasting, non-blueing finish. This double-insulated body provides an overall performance...

Handlebar storage bag that attaches with hook-and-loop straps. It is shaped like a hat for clean, wrinkle-free storage and includes two zippered pockets. The deluxe version features a stowaway map pouch and can also be used as a waist pack.

Features a unique electrode shape with Diamond Fire technology to maximize power. The improved flame kernel shape ignites the air/fuel mixture faster, creating a more localized pressure front for faster pressure rise, resulting in more complete combustion and improved engine performance. A truly premium performance plug. Sold each.

Makes raising snowmobile handlebars easier. 6" longer than stock length. Made with a PTFE smooth-bore liner with extra-tight stainless over braid, virtually eliminating any expansion. Brake lines are finished off with a UV-protective coating that prevents damage to chrome and painted surfaces. All fittings are plated multiple times to provide...

Sleek and durable accessory engineered for style and functionality. Constructed from optical-grade 0.08" polycarbonate for clear viewing and durability. Offers rider protection, works with handguards, and is compatible with stock and extended glove boxes. Installs easily with included hardware.

Handlebar grab strap with a molded rubber handle that works great as a side-hilling grab bar for snowmobiles or an extra grab bar for other powersports. Includes a universal mount kit for 7/8" handlebars.

A comprehensive range of handlebar risers and adapter kits from PowerMadd. Products include adjustable pivot risers, straight riser blocks, pivoting risers, and conversion kits to allow for customized handlebar height and positioning on various snowmobile models.

Larger and more protective than Star Series handguards, made of a stiff, two-piece spine for durability and a softer, colored body for flexibility. Includes various accessories like armor, lighting, and mirror kits. Handguards and mounts are sold separately.

Keep your hands warm and dry in all conditions. Keep out wind, rain, and mud. The unique stay-open design makes it easy to grab and see controls. On machines with heated grips, allows the rider to wear thinner gloves for better feel. Sold in pairs.

Extend your stock throttle cable by 10". Features an inline adjuster to fine-tune tension and slack, and universal ends for quick and easy installation.