All Products

Modeled after MX bars to give your bike a tough look. Steel bars feature a 1 1/4" clamping area (requires risers/clamp that accept 1 1/4"). Mitered top, sleeved down to accept 1" controls. Slotted for internal wiring and Throttle-By-Wire. Accepts H-D OEM heated grips.

Made with high-strength steel tubing, TIG-welded for strength and appearance. Drilled for internal wiring. Made in the U.S.A.

Modeled after MX bars to give your bike a tough look. Steel bars feature a 1" clamping area. 3 1/2" on-center knurling. Top of the bar is mitered. Bars accept 1" controls. Slotted for internal wiring and Throttle-By-Wire. Made in the U.S.A. Accept H-D OEM heated grips.

Provide better rider comfort by improving foot and leg positioning. Five quick adjustment positions. Expanded foot positioning is provided by 13" length, tapering from 4" wide down to 2 3/8".

Made from 1144 stress-proof steel with zinc-plated finish. Lowers the rear of the motorcycle up to a full 2” lower than stock. Accepts all factory mounting hardware.

Allow installation of a LA Choppers xXx air cleaner or Baron Big Air Kit to a Mikuni or S&S carburetor. Will also work for mounting other air cleaner kits designed to mount stock CV carburetors; not for use with Arlen Ness Big Sucker air cleaners. Constructed from 6061-T6 billet aluminum. Made in the U.S.A.

Sleek and comfortable grips with rubber center section that provides great grip and resists vibrations. Machined aluminum ends provide a great look.

Change the angle of your risers or T-Bars without installing different triple trees. Built-in 5 or 10 degree angle; can be installed to face towards or away from the rider. Machined from 6061-T6 billet aluminum.

Billet aluminum construction. Held in place with setscrews; fit 7/8" - 1 1/8" diameter axle ends. Sold in pairs. Made in the U.S.A.

Custom axle spacers made easy. Just measure, cut and install. Stainless steel construction with a polished finish. Measures 6" L. Made in the U.S.A.

Ideal for lowered Softails. Stronger than stock springs to prevent bottoming out. Fit OEM and Progressive Suspension shock absorbers.

Machined from billet aluminum with a chrome finish. Sold in pairs. Made in the U.S.A.

Plug-and-play wiring harnesses to complete your handlebar wiring job. Sold in a variety of pre-finished lengths to accommodate the most common bar jobs. Made in the U.S.A.

A reproduction of the original clamp half that secures the handlebar master cylinder or clutch control. Die-cast aluminum construction available in black.

Sleek, smooth design with comfortable rubber sleeves. Sold in pairs. Made in the U.S.A.

Machined billet aluminum for an aggressive yet subdued look. 4.5" L x 2.75" W. Sold each. Made in the U.S.A.

Machined billet aluminum construction. Designed for improved grip with a moto inspired look and feel. Measure 11 1/2" x 4". Sold in pairs. Made in the U.S.A.

Billet aluminum performance footpegs featuring a stainless-steel clevis. Made in the U.S.A.

Machined billet aluminum construction. 5/16"-24 adjustable Heim rod ends. Touring linkage adjusts from 11.5" to 12.5". Dyna linkage adjusts from 3.625" to 4.625". Made in the U.S.A.

Billet aluminum construction shift levers, stock length, made in the U.S.A.

Machined from billet 6061 aluminum derby covers available in multiple finishes. Made in the U.S.A.

Fills the recesses on the FXSTD upper triple trees. Allows mounting of custom risers or handlebars with built-in risers. Sold in pairs.

Billet aluminum construction. For use with LA Choppers billet performance risers (sold separately). Fit 1" and 1.25" diameter straight and pullback risers. Designed to fit H-D OEM dual-style gauges on models listed. Made in the U.S.A.

Adapters convert old-style male footpeg mounts that accepted female-style pegs to the late-style female mounts that accept male-mount pegs. Allow the use of male-mount footpegs on earlier model motorcycles. Available in black. Sold in pairs. Made in the U.S.A.

Longer shift peg makes changing gears a breeze. Peg measures approximately 3.5” long. Made of durable Delrin® material that retains the factory look. Includes chrome mounting bolt. Sold each. Made in the U.S.A.