All Products

A collection of clamp-on heated grip kits and replacement parts for ATVs and snowmobiles, featuring updated grip designs, thumb warmers, and various zone controllers.

Low-weight, high-quality packing material. Lighter, quieter, and longer lasting than fiberglass mat packing. Resists breakdown up to 593 °C (1100 °F). 250 g bag works for most 2-stroke applications. 500 g bag repacks most 4-stroke mufflers. Available in 250, 500 and 750 g bulk packs. Made in the U.S.A.

Easy slip-on style knee guards made from moisture-wicking and breathable stretch fabric. Features a mesh panel on the back for ventilation and an elastic closure to adjust fit. Includes impact foam inserts for protection, silicone grip on the top and bottom to keep guards in place, and non-fading sublimated graphics. Sold in pairs.

Shape offers good coverage without being bulky. Durable injected-molded polypropylene with a composite front plate for a solid mounting surface. Top and bottom edge rubber overmold lets the shield flex under impact. Drill bit and self-tapping screws included. Sold in pairs. Made in the U.S.A.

Made with soft, flexible and resilient polyethylene. Special mounting brackets clamp around aluminum guards easily and securely without drilling. No-drill design retains the strength of the aluminum handguard. Sold in pairs. Made in the U.S.A.

Stainless steel construction gives superior strength and appearance. Swivel hook design eliminates binding, extending spring life. Sold in pairs. Made in the U.S.A. NOTE: When measuring for exhaust spring length, please use the following points for reference: 1. Exhaust springs should be measured when they are off the vehicle. Wear eye protection...

Fiberglass cloth wrap available in black and tan. Stable at temperatures up to 1,093 °C (2,000 °F). Insulates exhaust header pipes to protect you and your machine from intense heat. Generous 2" W x 50' L roll is enough to wrap one long header or critical areas on multiple exhausts. Made in the U.S.A.

This quality-made fuel line will not harden or crack. Fuel line is made of premium polyurethane. Made in the U.S.A. NOTE: Not to be used with fuel over 10% alcohol.

Effective at keeping hands warm with simple hi/low/off switch operation. Installation is easy. Total 40W; draws less than 3A. Made in the U.S.A.

Aluminized heat barrier with adhesive backing. Foil-coated fiberglass cloth adheres to body panels to protect plastic or fiberglass from engine or exhaust heat. One 18" x 18" sheet provides 324 sq. in. of superior heat protection. Also available in a long narrow strip. Made in the U.S.A.

Keeps track of important maintenance times for oil changes, valve adjustments, spark plugs and more. Usable with any gas engine. Records and displays up to 9999.9 hours, which automatically roll over. Includes a log book and can be attached with supplied hardware or peel-and-stick application. Connects to spark plug wire, so no batteries are...

A comprehensive first aid kit with a Molle attachment system, great for home, auto, or offroad vehicle use. Includes a multifunctional knife, LED flashlight, emergency blanket, and a wide range of medical supplies such as bandages, gauze, antiseptic wipes, and a CPR mask.

A 7/8" diameter by 20' long kinetic recovery rope with a breaking strength of 22,000 lbs. Comes with a convenient storage bag.

A compact and portable chainsaw with easy-grip handles. The 26" chain features 11 cutting teeth made from 65 carbon steel, ready to tackle any small project. Packs down and stores in a durable pouch designed to attach to your belt or pack.

Heavy-duty 500D nylon with 1/2" closed-cell foam keeps hands warm and dry. Cinch-strap type fasteners seal around the handlebars. Sold in pairs.

The latest in muffler packing technology. Available with Competition Muffler Packing. Universal, easy-to-install design. Pillow can be trimmed to length to fit off-road muffler up to 20" L. Lasts 3 to 5 times longer than traditional packing and extends service to 30 to 40 engine hours. Competition Pillows resist breakdown up to 593 °C (1,100...

Heavy Cordura® outer shell with fleece lining helps keep your hands warm. Designed to allow more room for controls. Installs easily with hook-and-loop type fastener that seals around the handlebars. Measure 13.5" L x 9.5" W. Sold in pairs.

The PEET® Multi Dryer uses convection air technology to circulate air and safely dry footwear, gloves, and helmets. It eliminates odor caused by perspiration and bacteria, and removes mold and mildew without using hot air that can damage linings. Includes two Dryports for gloves, one for a helmet, and four for footwear.

A collection of replacement parts, wear items, and accessories for Moose Offroad plow systems, including side shields, flaps, wear bars, skids, and hardware kits.

Kits that allow remote operation of the plow angle from the driver's seat. Requires a winch for raising and lowering the plow. Engineered and assembled in the U.S.A.

Completely redesigned, the strongest and toughest plow blades on the market. The plow system provides 10" to 13" of lift, and the blade curve design provides better snow/dirt roll-off. Features highly visible yellow blades for safety and heavy-duty adjustable skids. All plow blades swivel left or right to any of five positions. Blades and mount...

Plow blades with a steel rib structure and a black poly face made from 1/8" thick High Density Polyethylene. Includes plow flap and works on all Moose push tubes, RM4 and RM5 systems.

Flexible, yet durable, molded goggle frame with venting. Optically pure clear polycarbonate lens with scratch-resistant and anti-fog coating. Large eye port for maximum vision in all directions. Elastic strap, with tacky grip print to hold goggle in place. Molded face foam provides secure fit and seals out dust and dirt. Replacement lenses and...

Optically pure polycarbonate lens with integrated tear-off posts.

A replacement hi/low/off switch (round rocker) for specific heated grip part numbers.