All Products

Two low profile LED light strips. Strips are 36” in length and contain 36 dual-color amber/white LEDs. Bright white turning light and full-contrast amber turn signal. Pre-taped for mounting. Can be cut after every 1 1/4” (3 LEDs) to create a custom length. Plug-and-play installation with pass-through male and female JAE connectors. Connectors...

Add a super-bright LED white running lights and amber turn signals to the end of your handlebars. 360° of illumination add safety and visibility. Six amber LEDs, six white LEDs per unit. Polycarbonate lens. White DRL LEDs are automatically deactivated when the turn signal lamp or hazard warning lamp is activated. Fit all 7/8" to 1" handlebars...

Replaces the factory fairing vent with decorative vent insert. Plug-and-play. Available in gloss black or chrome finishes. 15 super-bright white LEDs operate as constant DRL. 15 amber LEDs function as turn signals.

Bolts to stock fairing to increase forward and side visibility. Built-in white DRL running lights and amber sequential turn signals behind a smoked lens. Gloss black finish. Plug-and-play installation.

Direct replacement for the lower fairing radiator grilles or filler plates. Features more than 130 white and amber LEDs per side. When the turn signal is activated, the white DRL running light turns completely off providing greater visibility to the amber turn signal. Snap in place, plug-and-play.

Dual low/high tone electromagnetic horns. Kit includes horns, mounting bracket, wire harness and relay. 109 dB(a) at 2 m per horn. Nominal voltage: 12VDC. Dual low/high tone electromagnetic horns. Kit includes horns, mounting bracket, wire harness and relay. 109 dB(a) at 2 m per horn. Nominal voltage: 12VDC.

Fill the voids in the OEM FXLRST fairing. Single row of dual color LEDs and black mesh. 18 LEDs border each edge providing bright white light with contrasting amber turn signals. Plug-and-play harness.

Features built-in stainless steel vent mesh to match the stock air cleaner. Mounts with 3M™ tape. Vent trim does not interfere with opening and closing of stock fairing vent. Use with LED vent light kit PART #2040-1852, sold separately. Available in a chrome or black finish.

Available in white DRL with amber turn signals. Compatible with Decorative Vent Inserts PART #s 2350-0356 or 2350-0357 (sold separately). Installs with included chrome tie wraps. Plug-and-play. Sold in pairs.

Great for anywhere you need a spot of light, such as shift lights, dash lights, accent lights, and gauge lights. Direct 12VDC hook up with no resistor required. Includes 48" of 22-gauge wire covered in black sheathing. Sold each. Great for anywhere you need a spot of light, such as shift lights, dash lights, accent lights, and gauge lights. Direct...

Brake light containing 21 high-power dual-intensity red LEDs designed for maximum visibility. Brake will flash for approximately 6 seconds and then go solid until released. No load equalizer or resistors required. Dimensions: 7 1/2" L x 7/10" W x 7/10" H. Sold each.

Light bars featuring 12 super-bright LEDs with 3M™ double-sided tape for easy mounting. No load equalizer or resistors required.

Utilize super-bright LEDs for an eye-catching red, amber or white/amber LED light. Measure 5/8" in diameter and mount in a 1/2" hole. 4' of wire for installation. Red LED Boltz are dual-intensity, 3-wire. Amber LED Boltz are single-intensity, 2-wire. White/amber are 3-wire with white running light and amber turn signal; requires converter PART...

Features 20 super-bright flush-mount dual-intensity red LEDs per side with six bright-white tag light LEDs. Comes in black finish and can be wired as run/brake/turn lights on motorcycles with rear 1157 turn signals. Mounting hardware included. Frame dimensions are 4 1/4" H x 7 1/4" W. Features 20 super-bright flush-mount dual-intensity red LEDs...

Low-profile, sleek design license plate frames illuminated with six bright-white LEDs. Available in flat and radius styles with a black, gold, or chrome finish. Mounting hardware is included. Frames measure 4 1/4" H x 7 3/16" W, with mounting holes at 5 3/4" x 2 13/16" center-to-center.

LED inserts that function as both running and auxiliary turn signal lights. They snap in place with plug-and-play installation and feature 53 amber LEDs per side. The inserts produce a bright amber running light with full-contrast amber turn signal that is virtually invisible when off.

Offer super bright chip-on-board white LEDs for license plate illumination. Simple two-wire installation with 18" wire leads. M-6 x 1" thread. Fit all models with 12VDC negative ground systems. Thread diameter is 0.232", length is 0.59". Head diameter is 0.469", height is 0.711". Sold in pairs.

Aircraft-grade 6061-T6 billet aluminum housing with a chrome finish. Features 120 Custom Dynamics Genesis II LEDs. Includes installation hardware for flush-mount or surface-mount applications. Aircraft-grade 6061-T6 billet aluminum housing with a chrome finish. Features 120 Custom Dynamics Genesis II LEDs. Includes installation hardware for...

Slim design light bar with 50 dual-intensity red LEDs. Comes pre-taped for mounting to any flat surface. Features a simple 3-wire hookup. Measures 7" L x 0.5" W x 0.4" H.

A compact, bright spot of light with six high-power single-function LEDs. Ideal for adding an extra brake light (red), extra turn signal (amber), or for license plate illumination (white). Simple two-wire connection. Measures 2.3" L x 0.45" W x 0.2" H. Sold each.

A color-changing LED accent light system. Kits include a wiring diagram, installation kit, and a Bluetooth-compatible Color Command remote control. The remote allows the user to select from seven pre-programmed colors, create a custom color, or rotate through all colors at various speeds and patterns. All accent lights are pre-taped with 3M tape...

A comprehensive collection of color-changing LED accent light kits for motorcycles, featuring solid color modes, music synchronization, and brake alert functions. Kits are available with different controllers and component configurations. Not for V-Rod models.

Controls Magical Wizards™ LED accent light system. Connects to the ProGLOW™ app through a personal iOS or Android device to customize and control color changing lights. Includes a push button main power switch, three independently controlled zones (front/mid/rear), and can sync with audio. Features solid color, color-changing modes, and color...

Extremely versatile and flexible low-profile LED accent lights. Features high-output 5050 surface-mounted LEDs with 48" color-coded wire in high-temp protective black sheathing. Conformal-coated to be 100% waterproof and pre-taped with 3M™ tape. Sold in pairs unless noted.

100% waterproof LED engine kits with high-output 5050 surface-mount single-function LEDs and a 120° viewing angle. Features 48" color-coded wire in high-temp protective black sheathing and attaches with pre-attached 3M™ adhesive tape.