All Products

Plugs in under the front fairing. 90" 18 AWG wires route under the tank and to the rear speakers. Provides connections to OEM 16-port flat audio connector to power left and right speakers. Compatible with add-on 14-24 H-D OEM King LED Tour-Pak with rear speakers (sold separately). Plug-and-play technology.

Optional accessory to convert two-wire TruFlex II® LED strips to a three-wire dual-intensity system (Low, High, and Ground). Sold separately.

Four times brighter than original TruFlex® lights. These highly flexible strips feature a unique faceted design to increase viewing angle. Available with red or amber LEDs in a choice of UV-stable amber, red, or smoke tubing. Each strip is pre-taped with automotive-grade tape. Strips are 0.33" W x 0.33" H. Sold each. NOTE: A dual converter is...

Designed to have running lights, brake lights, and turn signals all in one strip. Can be wrapped around a fender. Requires a run/brake/turn module. Dimensions: 14.6" L x 0.34" W x 0.30" H. Sold each. Designed to have running lights, brake lights, and turn signals all in one strip. Can be wrapped around a fender. Requires a run/brake/turn module....

Dual density flexible LED strips designed for use as running, turn, or brake lights. Features a unique faceted design for increased viewing angle. Pre-taped with automotive-grade tape and sealed with military-grade RTV. Strips have 36" copper wire and are 0.34" W x 0.30" H. Sold each.

An integrated light bar containing 10 amber left and right turn signal LEDs, plus 20 red run and brake dual-intensity LEDs. Features a smoke-tinted tube and measures 5.7" L. An integrated light bar containing 10 amber left and right turn signal LEDs, plus 20 red run and brake dual-intensity LEDs. Features a smoke-tinted tube and measures 5.7" L.

Designed to wrap around forks for 360° of coverage, operating as running lights and/or turn signals. Mounts with 3M™ automotive-grade tape and does not require fork dropping. Features amber LEDs in a choice of amber or smoke tubing. Sold in pairs. NOTE: May require a load equalizer if used as turn signals.

Dual-function LED fork wrap-around turn signals featuring white running lights and amber turn signals in a smoke tube. White running lights automatically deactivate when turn signals are active. Easy to install with 3M tape. Sold in pairs.

Quick-disconnect for any two, three or four wire auxiliary lighting product. Features 22 AWG wires, 15" total wire length, and four-pin JAE connectors. Sold in pairs. Quick-disconnect for any two, three or four wire auxiliary lighting product. Features 22 AWG wires, 15" total wire length, and four-pin JAE connectors. Sold in pairs.

Wide-angle super-bright LED clusters. Each cluster has three wires (low, high, ground) and can be used as single or dual intensity. Sold each.

A universal brake light flasher with 10 user-selectable flash/strobe patterns. Features overcurrent, thermal, short circuit, and reverse wiring protection. 84W, 12V system. Works with LED or incandescent bulbs. Dimensions: 2.25" L x 1.25" W x 0.5" H. A universal brake light flasher with 10 user-selectable flash/strobe patterns. Features...

Bolt on to the left and right sides of the Road Glide headlamp. Provide white LED running lights and amber LED turn signals. Feature a decorative stainless steel mesh to fill the void between the headlamp and fairing. Plug-and-play. Sold in pairs.

Aluminum trim with flush-mounted amber/white LEDs behind a smoked lens. White running light LEDs are automatically deactivated when the turn signals or hazard warning lights are activated, allowing for greater visibility of the turn signals. Direct bolt-on installation with included mounting hardware and wiring. Available in chrome or gloss black...

Converts 2-wire Custom Dynamics Wrap-Arounds™ turn signals to 3-wire, allowing them to function as both running and turn signals. Sold in pairs. Converts 2-wire Custom Dynamics Wrap-Arounds™ turn signals to 3-wire, allowing them to function as both running and turn signals. Sold in pairs.

Constructed of fiberglass with a gel-coat finish. Available with exhaust cutouts. Bags only; accept stock H-D lids and hardware. Mounting holes come pre-drilled. Right and left sides sold separately. Made in the U.S.A.

Polished stainless steel bag draggers. Mount to bottom of most extended bags to prevent paint damage to bottom edge of bag while cornering. Measure 19.5" long and 1" wide; mounting hardware included. Sold in pairs. Made in the U.S.A.

Made of high-quality steel with a black powdercoated finish. Comes with fastening mechanisms. Will work with fixed or detachable sissy bar side plates. Saddlebags sold separately.

Made of high-quality steel with a black powdercoated or chrome finish. Comes with fastening mechanisms. Will work with fixed or detachable sissy bar side plates. Use with 93-21 style OEM-style hard-sided saddlebags. Made in the U.S.A.

Allows the installation of 99-13 H-D FLT/FLHT standard hard bags onto your Sportster. Made of high-quality steel and available in black powdercoated finish. Made in the U.S.A.

Allow instant removal of your saddlebags. Remove both the saddlebags and the steel mounting bracket. All components are made from high-quality 303 stainless steel. Made in the U.S.A.

Bail head fasteners and receptacles allow you to fasten your saddlebags to the bike with a simple twist. Fasteners and receptacles are sold in pairs and must be purchased separately. Made in the U.S.A.

Securely fasten your bags to your bike. Require an Allen wrench to tighten. Made in the U.S.A.

Enhances the area where the windshield attaches to the fairing. Available in chrome finish. Includes stainless steel mounting hardware. Made in the U.S.A.

Machined all-aluminum construction; not plastic or fiberglass. Easy bolt-on installation to models with hard saddlebags. Available without exhaust cutouts. Extra-wide extension for mufflers up to 5" in diameter. Sold in pairs.

Designed to keep rider safe and more visible when changing lanes. Amber LED, available with smoke lens. Soft control, M8 threading. Dimensions: 105 mm L x 19 mm W x 16 mm D. Sold in pairs. Smoke lens.