All Products

The industry's premier push-through stud with rugged durability. Features Woody's uniquely designed track-trapping head for unbeatable stud rigidity and support, through-hardened carbon steel with a 60° carbide insert, and 5/16" threads. For use in two-ply tracks and support plates.

High-grade, lightweight aluminum support plates for single-ply tracks. Available in round, square, and double styles in a natural finish or 10 powdercoated colors. NOTE: 2.52 pitch single-ply tracks cannot accommodate Round Grand Digger support plates - must use Square or Double Grand Diggers.

The most popular single-ply track stud available for trail riding. Features a through-hardened carbon steel with 60° carbide insert, a 1.2" head with anti-rotation lines, and 5/16" threads. For use in single-ply tracks and Grand Digger support plates.

Through-hardened carbon steel stud with a tip sharpened to match its 60° carbide insert. Features a 1.2" head with anti-rotation lines and 5/16" threads. For use in single-ply tracks and Grand Digger support plates.

The first-ever performance stud for single-ply tracks, built to effortlessly penetrate lake ice. Features a through-hardened carbon steel with a 60° carbide insert, a 1.2" head with anti-rotation lines, and 5/16" threads shortened to increase the length of its narrow shank. For use in single-ply tracks and Grand Digger support plates.

Fits on a standard 3/8" drive ratchet. Use on installed square support plates to ensure edges run parallel to the track edge.

Constructed of steel with a nylon ring. Designed to increase locking force and prevent the nut from coming loose.

High quality and performance Flat-Top runners available with 4", 6", or 8" of 60° carbide. Runners are 1/2" x 1/2". Made of durable steel with a combination of 60° carbide, hardweld and wear pads. They perfectly fit and guard the ski, offering a cutting edge on hard-packed snow and ice. The Flat-Top design offers increased surface area for less...

Carbon steel stud with four flat sides that increase surface area and paddle snow. A unique design by Woody's featuring a through-hardened stud with 5/16" threads and a 60° carbide insert for durability and excellent hookup. For use in two-ply tracks and support plates.

Available with 4" of 60° turning carbide or with standard wear bar. May need to drill extra holes in skis.

Push-through competition stud made from through-hardened carbon steel with a carbide point sharpened to 45°. Designed to hook up enduro, ice oval and cross country racers. Features Woody's uniquely designed track-trapping head for unbeatable stud rigidity and support.

Protect your skis from wear. While protecting your skis, they also help reduce darting. Sold in pairs.

High-grade, lightweight aluminum support plates for 5/16" threaded studs. For most single and combination studding patterns. Quick and easy to install - no indexing required. Available in natural finish or six powder-coated colors.

High-grade, lightweight aluminum support plates for 7mm studs.

For driving locknuts down on push-through studs. Provides the torque to tighten without touching the surface of the support plate. Will not scuff the finish of colored support plates.

Entry-level stainless steel studs, affordable for beginners. Features anti-corrosive properties with 5/16" threads and a 60° carbide insert to protect the stud and penetrate the terrain. For use in two-ply tracks and support plates.

For riders who like the reduced darting feature of the original Dooly™, but also want a lighter, performance-based runner for responsive cornering. Formed from one piece of steel, this dual runner comes with 4", 6" or 8" of carbide on two narrow blades, providing extreme control. Each Slim Jim 2® wear bar is sold individually.

Push-through competition stud designed for stock race sleds with a 1.750" lug. Made from through-hardened carbon steel with a 60° carbide insert and 5/16" threads. Includes Woody's Tall Big Nuts.

A universal kit to anchor a snow flap for added riding security. Fits all makes and models of snowmobiles and includes straps made from synthetic belting material and all necessary fastening devices.

A high-quality and durable track clip tool constructed by KB Tooling. The tool can be used while the track is still on the sled and features a two-piece unit design. The top is made of case-hardened 1018 steel, and the anvil is made of 6061-T6 tempered aluminum. An optional insert (sold separately) makes changing clips on a track with 3" lug...

High-grade, lightweight aluminum support plates that require indexing so edges run parallel with the track's edge, acting as a great re-torque indicator. For all single and combination studding patterns. Must be paired with corresponding stud shank size.

Easy to use tool for sharpening studs while they're on the sled. Place the tool into a 3/8" drill chuck to operate. Available in 30° and 60° angles.

Tool to install and remove push-through studs. Handle made from premium aluminum. Tool includes an extra hex bit.

CAD-designed templates to maintain track balance and provide ultimate scratch lines. Marking pattern first eliminates studding errors. Printed on heavy card stock.

White marker used to indicate stud placement. For use with Woody's studding templates to check patterns before drilling holes.