All Products

Provide hassle-free mounting of Custom Dynamics driving lights with a 5/16" mounting hole. Designed with a setscrew for secure mounting. Allen wrench included. Sold in pairs.

Superior connection to crimping. Wire ends are locked between opposing cone shapes when hand tightened.

An outer ring of 24 white ProBEAM LEDs showcase a smooth white halo that functions as a running light, while 12 center amber LEDs function as the turn signal. When turn signal is activated, the white LEDs turn completely off for the entire turn signal cycle. Housed in an aluminum bullet housing measuring 3.125" L x 2.25" D with a 5/16" - 18...

Utilize Cree LEDs to produce a superior beam pattern with a super-bright white LED halo. Available in traditional clear or selective yellow polycarbonate lenses. Clear lens produces a white halo and beam for optimizing light output and distance, while yellow lens minimizes glare from harsh conditions. Easily mount to engine guards with ProBEAM...

Features 24 amber dual-intensity turn, automotive-grade LEDs per unit. Housed in an aluminum bullet housing measuring 3.125" L x 2.25" D with a 5/16" - 18 mounting stud. Available in chrome or gloss black finish with amber lenses. DOT & SAE compliant. Sold in pairs. NOTE: Load equalizer may be required.

16 outer red LEDs illuminate as a smooth running light halo while 12 center red LEDs provide a full-contrast brake and/or turn signal light for maximum durability. Housed in an aluminum bullet housing measuring 3.125" L x 2.25" D with a 5/16" - 18 mounting stud. Dual-intensity. Sold in pairs. DOT and SAE compliant. NOTE: Load equalizer may be...

Features 24 red dual-intensity turn signal, automotive-grade LEDs per unit. Housed in an aluminum bullet housing measuring 3.125" L x 2.25" D with a 5/16" - 18 mounting stud. DOT and SAE compliant. Sold in pairs. NOTE: Load equalizer may be required. Features 24 red dual-intensity turn signal, automotive-grade LEDs per unit. Housed in an aluminum...

Direct replacement for OEM lower fairing radiator grilles or filler plates with 48 ProGLOW color changing LEDs per side. Open honeycomb grille cover allows air to flow through. Requires ProGLOW Bluetooth controller (sold separately) to control via app. Unlimited color combinations and music sync capabilities.

Add color-changing illumination to speakers. 24 color-changing LEDs per light. Snap-on installation with IP67 rated connectors. Plug-and-play technology. Requires ProGLOW Bluetooth Controller (Part #2050-0440; sold separately). Sold in pairs.

Connects to the ProGLOW™ app through your personal iOS or Android device to customize and control your color changing lights. Features three independent controlled zones, a pushbutton main power switch, and audio sync capability. Optional brake alert function can be enabled for increased visibility. Connects to the ProGLOW™ app through your...

Watertight, plug-and-play color changing LED accent light strips for any 12VDC system. Pre-taped for mounting. Sold each. Requires ProGLOW™ Bluetooth® controller PART #2050-0440 (sold separately).

Watertight, plug-and-play oval disk wheel lights that provide 360° coverage. Pre-taped for mounting to the inside of the front wheel brake caliper. Sold each. Requires ProGLOW Bluetooth® controller (PART #2050-0440), sold separately.

Complete plug-and-play kits for color-changing LED accent lighting. All kits are pre-taped for easy mounting and include the ProGLOW™ Bluetooth® controller, wire splitters, caps and extensions. Features solid color and animation modes, color match technology, three independent zones, music synchronization, brake alert function, and battery...

Individual components for the ProGLOW™ color-changing LED lighting system, including light strips, wire extensions, and splitters. Allows for custom installations and expansions. All components are for universal 12VDC systems and feature watertight IP67 rated connectors.

Replace stock signal lenses. Available in red and smoke. Sold in pairs.

Rubber grommets push into place to protect wire, cable, and cords. For 9/16" hole diameter. 1/8" inner diameter, 3/4" flange diameter. Sold in pairs. Compatible with Custom Dynamics Saddlebag Latch Assemblies with Dual Intensity LEDs.

A no load, no heat load equalizer that prevents rapid turn signal flash when factory turn signal bulbs are removed or replaced with LED. One module needed per motorcycle. Features adjustable load setting. Dimensions: 4.2" L x 0.6" W x 1.4" H. A no load, no heat load equalizer that prevents rapid turn signal flash when factory turn signal bulbs are...

Converts rear 1156/7507 turn signals to run-brake-turn function on 12VDC motorcycles with 2 rear turn signals. Works with LEDs or incandescent bulbs. Features 10 user-selectable brake light strobe/flash patterns, and 10 user-selectable running light intensities. Load Equalizer/Signal Stabilizer required (sold separately). Sealed weathertight case....

Replaces stock 2- or 3-pin flashers on most metric bikes. Only one unit needed when replacing stock turn signals with LEDs on front and rear. Maximum 120W. Replaces stock 2- or 3-pin flashers on most metric bikes. Only one unit needed when replacing stock turn signals with LEDs on front and rear. Maximum 120W.

Extremely versatile and flexible LED accent lights. Features 48" wires and are pre-taped on three sides for easy installation. Sold in pairs.

Plugs in under the front fairing. 90" 18 AWG wires route under the tank and to the rear speakers. Provides connections to OEM 16-port flat audio connector to power left and right speakers. Compatible with add-on 14-24 H-D OEM King LED Tour-Pak with rear speakers (sold separately). Plug-and-play technology.

Optional accessory to convert two-wire TruFlex II® LED strips to a three-wire dual-intensity system (Low, High, and Ground). Sold separately.

Four times brighter than original TruFlex® lights. These highly flexible strips feature a unique faceted design to increase viewing angle. Available with red or amber LEDs in a choice of UV-stable amber, red, or smoke tubing. Each strip is pre-taped with automotive-grade tape. Strips are 0.33" W x 0.33" H. Sold each. NOTE: A dual converter is...

Designed to have running lights, brake lights, and turn signals all in one strip. Can be wrapped around a fender. Requires a run/brake/turn module. Dimensions: 14.6" L x 0.34" W x 0.30" H. Sold each. Designed to have running lights, brake lights, and turn signals all in one strip. Can be wrapped around a fender. Requires a run/brake/turn module....

Dual density flexible LED strips designed for use as running, turn, or brake lights. Features a unique faceted design for increased viewing angle. Pre-taped with automotive-grade tape and sealed with military-grade RTV. Strips have 36" copper wire and are 0.34" W x 0.30" H. Sold each.