All Products

Faster rise times, higher voltage, and maximum spark energy to the plug. 0.5-ohms single-fire 12 volt coil delivering up to 20% more voltage than OEM coils. Designed to fit in stock location and under most coil covers. Available in black.

Ideal's #552 heavy-duty 12V flasher. Ideal's #552 heavy-duty 12V flasher.

12V Super Coils feature a unique look to match their high-tech performance and state-of-the-art reliability. Eye-catching bright yellow or black colors. Available for electronic ignitions. Will not fit F.I. models or Twin Cam applications.

Chrome fuel valve from Accel is designed to replace all right, left and rear spigot applications. Unique design incorporates a banjo-type spigot with a 180° swivel onto a high-flow fuel valve with a 22 mm nut. Features a 100 micron fuel screen.

Wraps will increase power and reduce radiated exhaust heat. Kit includes 2" W x 25' L top-quality high-temperature wrap and four stainless steel tie wraps for that finishing touch. Wraps can withstand up to 2,000 F (1,093 C). Available in black.

Features high-quality Bakelite insulators, heavy-duty contacts, and high-conductivity brass terminals. Made in the U.S.A.

Features a stainless steel housing with solid-brass internals. 1 5/8" face is covered with glycerin to reduce needle bounce and then sealed with a real glass lens that won't fade, melt or distort. 1/8" NPT threads. Sold each.

Precision-calibrated replacement oil pressure switch. Features heavy contacts, brass pressure ferrules, thermoplastic insulators and brightly finished steel shells. Made in the U.S.A.

Offers higher voltage, faster rise time and longer spark duration. Features vibration- and heat-resistant construction.

Graphite suppression core wires for street or strip. Available for single-plug head applications. Single-plug kits contain one 42" wire. Kit contains brass locking terminals and boots for male- or female-type coil ends. Made in the U.S.A.

Bolt-action locking device on the swingarm adds two intermediate positions. Relocate passenger peg location to a more comfortable, ergonomic position. Revised mounting system allows easier installation and better fit on newer models.

A three-pack of waterproof bags made from Polyester with a PU coating. Seams are sealed with seam tape. Features heavy-duty ITW quick-release buckles and a roll-down top design for a waterproof seal. Includes a drawstring carrying and storage bag. Three-pack includes one 2L, one 5L, and one 10L bag.

Designed to function in any tough environment. Can help you lash cargo to any type of bike. Constructed of tough, marine-grade nylon webbing. Ideal for cargo security and packs away easily. Classic straps you can loop through anything, including themselves; have loops on both ends. Quick-release center buckles help you remove your load quickly....

A stepped 4.5-inch diameter slip-on muffler with a CNC machined billet end cap. Compatible with factory saddlebags and meets SAE J2825 sound standard. An optional US Forest Service spark arrestor is available. This product is 50-state emissions compliant. Adventure Hi-Output 450

A powerful line of lights for any situation. Some models can function as floodlights, headlamps, or a power bank for charging a mobile device.

Kit includes all necessary parts to rebuild the air cut-off valve circuit. An improperly functioning air cut-off valve can stick open or closed, causing popping on deceleration or poor running conditions.

Unique inflatable, multiple-cell design for the ultimate in comfortable seating and vibration absorption. Made from polyurethane and features a breathable, stretchable outer cover and a nonskid urethane base. Features open-mesh side panel to allow air circulation. Shape Fitting Technology eliminates painful pressure points. Made in the U.S.A.

Center cutout area runs from the front to the back of the cushion, creating strategic points of no contact. Back cutaway allows for tailbone and prostate relief. Redesigned cell geometry improves airflow. Includes a nonskid cover and straps for securing it to the bike's seat. Made in the U.S.A.

Created to fit seamlessly within the lines of the bike and utilizing a design used on Akrapovič products for the Adventure bike sector. Highly durable slip-on has a sandblasted high-grade titanium muffler outer sleeve and handmade carbon fiber end cap. Weight savings of 11.6% or 1 lb. (0.5 kg) over stock. Needs no remapping.

Constructed from sandblasted, lightweight titanium that is high-strength and corrosion-resistant. Offers an approximately 40% weight savings over comparable steel versions. Precision TIG welded and equipped with laser-cut, finely machined 8 mm flanges to provide a perfect fit and strength. Fits perfectly with the bike's existing components and...

An economical way to reseal a leaky carburetor. Includes one gasket per kit. Multi carburetor machines will require multiple kits. Applications that use paper float bowl gaskets are upgraded to high-performance interface gasket material. NBR rubber is used for gaskets, which has excellent resistance to ethanol used in today's fuels.

Comes ready for plug-and-play installation. Kit includes all necessary parts to rebuild the OEM fuel pump. This is a great solution for bringing life back to a poor-performing or non-performing fuel pump. Includes the pump and components to rebuild the OEM fuel pump module. Includes fuel pump, filter, hose(s), clamp(s) and wiring harness as...

Kits to rebuild fuel taps and diaphragms for a variety of motorcycles.

Brake caliper bolt kits for various Honda, Kawasaki, Suzuki, and Yamaha motorcycle models.

Each kit contains all rubber parts necessary to rebuild one caliper. Kits include boots, seals, bleeder cap, brake pad retaining pins and copper washers.