All Products

Adapter for use with Custom Dynamics rear LED turn signals. Required when stock rear turn signals are removed for custom applications (1 per turn signal).

Slimline smoked faceted lens stretches across lower center windshield edge. 72 dual-color LEDs with bright white running light and full contrast amber turn signal. Select one of three built-in flash modes. Affixed isolators snap into place in the OEM fairing air duct cover. Includes plug-and-play harnesses. Requires accessory adapter for...

A system of color-changing LED rock lights for all 12VDC systems, controllable via a Bluetooth ProGLOW controller. The system is expandable and includes various mounting and wiring accessories.

Replaces the top un-lit piece of the Custom Dynamics CVO License plate assembly. Six bright-white LEDs flush mount across the bottom of this optional top attachment.

Diode kit for metric cruisers with one turn signal indicator bulb. Kit is required when front turn signal bulbs are replaced with LEDs. Diode kit for metric cruisers with one turn signal indicator bulb. Kit is required when front turn signal bulbs are replaced with LEDs.

Double lamps within a completely sealed IP67 waterproof housing providing projection style low beam. Eight more LEDs utilize reflective technology for high beam. Plug-and-play installation.

Clear template adheres to 14-24 H-D aftermarket King Tour-Pak without OEM factory lighting. Use when installing Custom Dynamics ProBEAM Tour-Pak light. Cut-outs in template provide locations for cutting and drilling leaving the guesswork out of installation.

45 dual-color LEDs per unit providing red running/brake light and amber turn signal. Available in gloss black or chrome housing with smoke lens. Pre-taped for mounting and includes plug-and-play installation.

Replaces reflector in OEM saddlebag hinge faceplate. 81 dual-color LEDs per unit. Can be run as dual-color red running/brake light and amber turn signal or dual-intensity red running/brake only. Chip-on-board LED technology.

Wiring harness for dual color saddlebag latch assemblies. Compatible with Custom Dynamics Saddlebag Latch Assemblies with Dual Color LEDs.

Dual converters needed to use TruFlex® Flexible LED Strips as a dual-intensity three-wire system. Available for various LED counts.

Flexible, low-profile auxiliary LED strips designed to mount under the rear fender edge. Each 23.5" long strip contains 72 dual-intensity red LEDs placed at a 90° angle to shine towards the rear. Strips have 5' wire leads and can be cut every 6 LEDs (1.95") to customize length. Universal design with 3-wire installation. Sold in pairs and...

Has six bright white license plate LEDs and 45 super-bright flush-mount dual-intensity red running/brake LEDs. Available in a flat style with a black finish. Universal fit. Mounting hardware included. Plate dimensions measure: 4 1/4" H x 7 1/4" W. Has six bright white license plate LEDs and 45 super-bright flush-mount dual-intensity red...

Two low profile LED light strips. Strips are 36” in length and contain 36 dual-color amber/white LEDs. Bright white turning light and full-contrast amber turn signal. Pre-taped for mounting. Can be cut after every 1 1/4” (3 LEDs) to create a custom length. Plug-and-play installation with pass-through male and female JAE connectors. Connectors...

Direct bolt-on installation for 1.25" engine guards. Each unit adds six bright white running LEDs and six amber turn signal LEDs. Requires 5" of straight (not curved) mounting area. When the turn signal is activated the white LEDs turn completely off for the entire turn signal cycle. Universal 12VDC negative ground. Available in a gloss black...

Mirrors featuring two rows of forward-facing bright white/amber LEDs behind a smoke lens and built-in rear-facing red LEDs. White DRL LEDs deactivate when turn signal is active. Wires concealed in mounting stem. DOT compliant mirror glass.

Add forward facing white running lights with full contrast amber turn signals. Feature 48 dual-color LEDs and mount with double-sided tape. Smoked lens. Plug-and-play technology. Sold in pairs.

Add a super-bright LED white running lights and amber turn signals to the end of your handlebars. 360° of illumination add safety and visibility. Six amber LEDs, six white LEDs per unit. Polycarbonate lens. White DRL LEDs are automatically deactivated when the turn signal lamp or hazard warning lamp is activated. Fit all 7/8" to 1" handlebars...

Replaces the factory fairing vent with decorative vent insert. Plug-and-play. Available in gloss black or chrome finishes. 15 super-bright white LEDs operate as constant DRL. 15 amber LEDs function as turn signals.

Bolts to stock fairing to increase forward and side visibility. Built-in white DRL running lights and amber sequential turn signals behind a smoked lens. Gloss black finish. Plug-and-play installation.

Direct replacement for the lower fairing radiator grilles or filler plates. Features more than 130 white and amber LEDs per side. When the turn signal is activated, the white DRL running light turns completely off providing greater visibility to the amber turn signal. Snap in place, plug-and-play.

Convert single-intensity LEDs to dual intensity with 100% running lights and full-contrast turn signal flash. Works with any size LED up to 300mA per side.

Replace the factory horn with 109 dB (at 2 meters). Single, low tone electromagnetic MARCO horn. Includes mounting bracket and nut for installation. Plug-and-play installation with connection to factory wiring.

Fill the voids in the OEM FXLRST fairing. Single row of dual color LEDs and black mesh. 18 LEDs border each edge providing bright white light with contrasting amber turn signals. Plug-and-play harness.

Features built-in stainless steel vent mesh to match the stock air cleaner. Mounts with 3M™ tape. Vent trim does not interfere with opening and closing of stock fairing vent. Use with LED vent light kit PART #2040-1852, sold separately. Available in a chrome or black finish.