All Products

Easily mounts around handlebars. Uses two-piece clamp for easy installation without having to remove other components off handlebar. Available in black or chrome finishes. Standard 10 mm threads along with 10 mm left-handed threads. Sold each.

Faithful reproductions of the left and right handlebar switch housing for Honda CB550 and CB750F/K models. Used also as universal handlebar switches because of their durability and ease of use. Includes harness with color codes and pre-installed bullet connectors. Sold each.

Great looking die-cast lights with high-luster chrome body. Lighting from high-output, dual-function amber LED. Dimensions: 1.5" x 1.5" x 3.5". Sold as a pair; includes both clear and amber lenses. Great looking die-cast lights with high-luster chrome body. Lighting from high-output, dual-function amber LED. Dimensions: 1.5" x 1.5" x 3.5". Sold as...

Great-looking, short-stemmed, chrome-plated mirrors designed with cruisers in mind. Available with standard or reverse 10mm thread. Sold each.

Complete kit with all necessary parts to install Lucas-style headlight shells. Includes (4) W retainer clips, (1) screw, (1) rim retainer clamp, and (1) 3-prong headlight connector with wiring pigtail. Complete kit with all necessary parts to install Lucas-style headlight shells. Includes (4) W retainer clips, (1) screw, (1) rim retainer clamp,...

Faithful reproduction of chrome Lucas-style switch used for decades by OE British manufacturers. Can be wired for many uses on customs. Sold each. Faithful reproduction of chrome Lucas-style switch used for decades by OE British manufacturers. Can be wired for many uses on customs. Sold each.

A scaled-down version of the 7" Lucas-style headlight shells. This gloss black shell with a chrome rim is complete with a bottom hole for wire routing, a copper ground spade, and wire loom retainers. It accepts most 5 3/4" sealed beam and LED headlights. Uses 5/16"-24 mounting bolts (not included). Requires purchase of Headlight Shell Hardware Kit...

A faithful reproduction of the classic Lucas headlamps from the 50s and 60s. The shell is 6 1/4" deep and measures 6 3/4" between mounting points. It features a bottom hole for wire routing and accepts most 7" sealed beams. Kit includes the headlamp shell, rim, W clips, rim hardware, and wiring pigtail. Uses 5/16"-24 mounting bolts (not included).

Mirrors with a matte black finish and 10 mm mounting. Available in left- and right-side applications. Sold each.

26" universal muffler. Comes with multi-piece reducer set. Fits 1 3/4", 1 3/8", 1 1/2" and 1 5/8" pipes. Available in standard and wide-mouth megaphone styles. Sold each.

Flat-type chrome OE-style gas cap fits many original and aftermarket gas tanks from the 1950s through the 1970s; sold each. Flat-type chrome OE-style gas cap fits many original and aftermarket gas tanks from the 1950s through the 1970s; sold each.

Meets or exceeds OEM-quality standards. Made with the highest quality paper, rubber and metal.

Faithful reproduction of British-style "ON/OFF" petcocks used on BSA, Norton and Triumphs. Thread into 1/4" NPT tank fitting and utilizes a lock nut to keep petcock in position. Has 1/4" NPT outlet threads. Chrome finish; sold each. For OE fitment, check OE part numbers before ordering.

Replace the stock footpegs. Forged aluminum. Sold in pairs. Replace the stock footpegs. Forged aluminum. Sold in pairs.

Replaces OEM fitments. OEM part number provided to determine correct coil on bikes with multiple ignition coils. Sold each.

Replicate OEM fit and finish. Install the same as OEM. Sold each (unless noted).

Correct OEM replacement oil filter bolt; has correct internals and threads. Includes O-ring.

Includes oil filter cover O-rings that normally aren't included with oil filters. Should be changed every oil change. Includes oil filter cover O-rings that normally aren't included with oil filters. Should be changed every oil change.

Only the highest-quality paper, metal, and rubber are used to manufacture these top-grade filters. Clean oil makes engines last longer.

Designed for strong protection with aluminum brackets and frame. The indexed steel bar-end insert mounts solidly and prevents the guard from rotating in a crash. Comes equipped with a universal X-Strong mount kit.

Black finish with protective rubber boot over adjuster. Available in short or long stem. 10 mm mounting. Sold as a pair (left and right).

Great replacement for OEM Honda CB models and other universal applications. Chrome, round mirrors either have 8 mm or 10 mm mounting threads. Can be used for left or right applications, unless noted. Sold as each.

Great OE-style replacement mirrors for Kawasaki KZ models, as well as other universal applications. Black satin finish with round OEM-style mirror. Available in long- or short-stem version with 10 mm threaded mounting. Can be used for left or right sides. Sold as each.

Replacement sealed beam headlight units for most 5 3/4" and 7" applications. Not DOT compliant. Sold each.

Allow 12 mm shock eyelets for use on 10 mm applications. 12 mm OD x 10 mm ID. Sold as a pair. Allow 12 mm shock eyelets for use on 10 mm applications. 12 mm OD x 10 mm ID. Sold as a pair.