All Products

Watertight, plug-and-play color changing LED accent light strips for any 12VDC system. Pre-taped for mounting. Sold each. Requires ProGLOW™ Bluetooth® controller PART #2050-0440 (sold separately).

Watertight, plug-and-play oval disk wheel lights that provide 360° coverage. Pre-taped for mounting to the inside of the front wheel brake caliper. Sold each. Requires ProGLOW Bluetooth® controller (PART #2050-0440), sold separately.

Complete plug-and-play kits for color-changing LED accent lighting. All kits are pre-taped for easy mounting and include the ProGLOW™ Bluetooth® controller, wire splitters, caps and extensions. Features solid color and animation modes, color match technology, three independent zones, music synchronization, brake alert function, and battery...

Individual components for the ProGLOW™ color-changing LED lighting system, including light strips, wire extensions, and splitters. Allows for custom installations and expansions. All components are for universal 12VDC systems and feature watertight IP67 rated connectors. Individual components for the ProGLOW™ color-changing LED lighting...

Black single-pole push button. Features a waterproof boot to protect the switch from the elements. Sold in 3-pack.

Provides convenient plug-and-play connection of OEM or add-on Tour-Pak. Provides accessible connector for easy removal of Tour-Pak. Sold each.

Radius license plate frame featuring three banks of auxiliary red LEDs and tag illumination. 20 red LEDs are flush mounted on either side with a row of 50 dual-intensity red LEDs flush mounted across the bottom. Six white LEDs embedded for tag illumination. All wires exit a single location.

Mounts work with all Custom Dynamics radius plate frames (sold separately). Available in chrome or gloss black. Includes mounting hardware and gasket.

Plug-and-play module installs under the seat to add load back to rear turn signal circuits when OEM rear turn signals or Tour-Pak are removed/replaced. Resolves open rear turn signal codes and rapid turn indicator flashing when rear turn signal current draw is less than 120mA per side. 64mA draw per side at 12.8V.

Allows for aftermarket low-current draw LED lighting products to be installed on the rear when OEM rear lighting is removed. Plug-and-play.

Direct plug-and-play replacement LED panels for OEM CVO taillights. Features Modern ProBeam design with 9 LED running light pipes, full contrast, and DOT compliant brake and turn signal LEDs. Units are completely sealed.

Replaces OEM license plate assembly. Aluminum mount with chrome or black finish. Mounting hardware and gasket included.

Replace stock signal lenses. Available in red and smoke. Sold in pairs.

Smoke replacement lens for stock Tombstone taillight housing (OEM #68280-05). DOT/SAE compliant. Sold each.

Rubber grommets push into place to protect wire, cable, and cords. For 9/16" hole diameter. 1/8" inner diameter, 3/4" flange diameter. Sold in pairs. Compatible with Custom Dynamics Saddlebag Latch Assemblies with Dual Intensity LEDs.

Contain 100 chip-on-board LEDs. Available with black or chrome finish. For use with H-D sissy bars and passenger backrests. Plug-and-play.

Plug-in wiring harness connects to the OEM wire harness to access run power, turn signal power and ground. Provides connection for Custom Dynamics plug-and-play lighting products like Micro Turn Signals, Mirror Mount Turn Signals or LED mirrors. Pigtails for left- and right-side connections. JAE female connectors.

Direct plug-and-play replacement for OEM saddlebag reflectors. 75 super-bright, dual-intensity red LEDs per unit providing enhanced side visibility.

Sleek, tapered LEDs mimic the side body line of OEM saddlebags. Gloss black finish. Red or smoke lens houses single row of dual-intensity red LEDs. Wrap around feature increases visibility. Plug-and-play installation.

Features advanced optics with D lenses for a wide, consistent light output. Selective yellow lens increases visibility and minimizes glare from harsh weather. Direct replacement for OEM 4.5" passing lamps. 3000k color temperature. Dual beam: 3438 raw lm, 1538 effective lm.

Specialized high-performance LED headlights designed for motorcycle use. Features durable polycarbonate lens with IP67 waterproofing, 5800 to 6500K daylight color temperature, and stainless steel mounting brackets. DOT and SAE compliant.

Accessories for installing Shark Demon LED headlights.

For use with SMART Turn Signal Controller and Dual-color amber/red 1157 rear turn signals. Feeds brake signal to any 3-wire lighting product so that a separate Magic Strobes brake light flasher can be installed.

A no load, no heat load equalizer that prevents rapid turn signal flash when factory turn signal bulbs are removed or replaced with LED. One module needed per motorcycle. Features adjustable load setting. Dimensions: 4.2" L x 0.6" W x 1.4" H. A no load, no heat load equalizer that prevents rapid turn signal flash when factory turn signal bulbs are...

Designed to replace the run/brake/turn functions on non-CVO 10-13 FLHX/FLTRX when rear fender OEM tribar light is removed. Features 10 programmable brake strobe patterns. 6-pin Molex connector plugs into OEM wire harness, with hardwire output for connections to custom rear lighting. Requires Signal Stabilizer PART #2050-0219, sold separately.