All Products

Controls heat output of GEN-X3 and GEN-X4 heated clothing. Features a variable controller with a built-in rotary on/off switch. Dual LED displays and dual outputs offer independent temperature control for two articles of GEN-X heated clothing. Each output is able to control up to four interconnected articles (total power not to exceed 10A)....

Controls heat output of GEN-X3 and GEN-X4 heated clothing. Features a variable controller with a built-in rotary on/off switch, and an LED display for on/off and heat setting. Able to control up to four interconnected articles of GEN-X heated clothing (total power not to exceed 10A). Includes overload, short circuit, and reverse polarity...

Used to power GEN-X3/GEN-X4 heated gloves or glove liners without a GEN-X3/GEN-X4 heated vest or jacket. Built-in temperature controller allows you to choose from seven distinct heat levels. An LED light indicates whether the heat is on or off. The Y-cord is long enough to pass underneath a motorcycle jacket and through each sleeve. A clip-on hook...

Lightweight EVA foam construction for warmth and comfort with an anti-slip material on the bottom to keep them in place. A carbon fiber heating element covers almost the entire foot area for even heat distribution. Provides 14.5W of heat while drawing 1.2A per pair. Easy to install and remove for use in any boot. Can be trimmed to fit most boot...

Comfortable 85% polyester, 15% Lycra® liners fit snugly under existing windproof and waterproof gloves or mitts. Heating elements warm the entire length of each finger and thumb. Connects to a 12V power source, providing 27W of heat and drawing 2.2A. Note: GEN-X3 and GEN-X4 are fully compatible.

Extremely comfortable socks made with 85% polyester and 15% Lycra®. ZEPTO® fiber heat technology covers the entire foot area, providing uniform heat on the top and bottom of toes. Custom-fit design for left and right feet, designed to fit under tall or short boots. Note: GEN-X3 and GEN-X4 are fully compatible.

Flexfit design for multipurpose use, made from windproof microbacterial technical fabric with Lycra® side panels for movement. Designed to be powered by a 12V battery and includes a 20" battery cord. Features two front side pockets, a snap-on electric connection on the back for connecting gloves, and two input connections for independent...

Soft, drum-dyed leather construction with an extra-long gauntlet and hook-and-loop closure. Elements heat the entire length of each finger, thumb, and back of hand. A windproof, waterproof, and breathable Porelle® insert keeps hands dry. The pair of gloves produces 29W of heat and draws 2.1A. Can be plugged directly into GEN-X4 jacket liners....

Windproof, waterproof polyester main body construction for maximum warmth. Side panel features dual-layer construction; Lycra® (inner) and breathable cotton/Lycra blend (outer) allows moisture to escape while retaining heat and a snug fit. The entire liner is heated, including the back and collar. Connects to a 12V power source with the included...

Handlebar bags made from heavy-duty 600D polyester construction with a polyurethane coating to prevent mildew. Features a large main compartment, a front pocket, and extra-long zipper pullers for easy access.

A practical collection of headwear by Gears, including various balaclavas like Polarclava, Thermaltex, and Anti-Freeze models, plus neck shields and helmet liners for all-around cold weather comfort.

A heavy-duty nylon outer shell with a plush sherpa-fur inner lining to protect your helmet.

Heating elements throughout the gloves, including to the tip of every finger, provide non-stop heat up to 57 °C (135 °F). Connects directly to your vehicle's DC power system. Features high-impact TPU knuckle protection, adjustable hook-and-loop wrist closure, PrimaLoft® Silver 80g insulation, and touchscreen compatibility. Equipped with a...

Constructed of tough, UV-stabilized polyester with a water-resistant coating. Features a non-abrasive material on the inside to prevent scratching of the windshield and extra-strong elasticized hems for a secure fit. Folds compactly into the included storage bag. The X-large size has a hook-and-loop rear opening for dual antennas.

Helps a passenger hold onto the driver safely with an ergonomically designed harness. Features comfortable rubber handles for an easy and secure grip. Constructed of waterproof polyester and designed to be worn over clothes, snowmobile suits, and life vests. The belt expands to 55".

Heavy-duty 600D polyester construction with polyurethane coating for UV-protection and water-resistance. Features a vent guard system to reduce moisture buildup, aluminum-coated heat shields for use on hot pipes, a non-abrasive windshield liner, and elastic hems with web tie-downs. The X-large and larger sizes include a hook-and-loop slot for...

A replacement buckle for luggage attachment. Designed for use with 1" wide webbing.

High-grade, weather-resistant vinyl material to replace a worn seat cover for a finished, professional look. Sold in two sizes.

Water-repellent nylon outer shell with a soft inner lining for warmth and comfort. Rigid plastic inserts provide a wide opening and protection. Designed for easy adjustment and more hand room. Sold in pairs.

Saddlebags constructed from heavy-duty 1200D Technolast, UV-treated polyester with a polyurethane coating to resist mildew. Features large main compartments with rigid inner supports, rugged rubber handles, long pull tabs, a reflective back strip, and Fastex quick-release buckles.

A variety of high-quality covers designed to protect snowmobiles during storage or trailering. Available in multiple materials and sizes to fit a wide range of sleds.

100% waterproof storage cover with electronically heat-sealed seams. It has a soft urethane coating for protection against dirt, sap, and rain, and provides UV protection. A unique ventilation system minimizes condensation, and a soft windshield liner prevents scratching. Features an elastic hem and webbing for a super snug fit. Made from durable...

Constructed of heavy-duty, 1200D Technolast UV-treated polyester with a mildew- and mold-resistant coating. It fits perfectly between the seat and taillight. Features a large main compartment, two small side pockets, and allows easy access to the sled's tool box from inside the bag. Includes a rubber carrying handle and extra-long rubber zipper...

A tunnel bag specifically designed to fit Ski-Doo REV XP/XR models. Made from heavy-duty 1200D Technolast, UV-treated polyester. Features an easy-to-grip rubber handle, reflective beading, an easy-to-remove buckle system, and two large pockets on each side. Fits perfectly in the sled's tunnel. Dimensions: 20 1/2" L x 15" W x 7" H.

Easily accommodates large size cups, cans, and bottles up to 8 cm in diameter. The non-bulky coiled design features shock absorption and a separate inner insulated removable lining. Mounts on either the handlebar or a side view mirror bracket. Handlebar mount fits most popular diameters (7/8", 1", and 1 1/4").