All Products

Can be easily installed in minutes as a plug-in for a visor kit. No tools are required for installation, simply remove the old plug and replace it with this new one. Wiring harness included and comes with everything you need to connect the heated visor to your vehicle. Instant heating and no waiting around for heat to build up before using your...

A versatile tunnel bag with a four-point cam buckle hold-down system for lengthwise or crosswise installation. Features an expandable main pocket made of 1,260D waterproof fabric, top and side pockets, an anti-slip/anti-scratch bottom pocket, and a shovel blade pouch. Easily removable with a convenient handle. Dimensions: 16.5" L x 10" W x 9.5" H...

Shield your hands from the cold wind while maintaining full visibility of handlebar controls through a clear, cold-resistant plastic window. Removable fleece lining on the interior adds extra warmth. Equipped with a neoprene enclosure that wraps around your jacket or mittens to keep body heat trapped inside. Can be used with mittens or gloves if...

100% waterproof motorcycle cover with electronically heat-sealed seams. Made from top-quality Duramax polyester with a soft urethane coating to protect against dirt, sap, and rain. A ventilation system minimizes condensation, and a soft windshield liner prevents scratching. Features a snug elastic hem, webbing for a secure fit, a rear opening for...

An unbeatable fusion of X Gel and Viscoelastic foam designed for ultimate riding comfort. Its concave design eliminates pressure points on the tailbone and spine caused by long hours of riding. It absorbs vibrations from road bumps for unsurpassed comfort. The climate-control gel polymer is divided into two parts in Medium and Large seats to...

A comfortable youth balaclava made with 100% cotton construction. Features a U-shaped neck with flat seams for added comfort.

Integrates 15W wireless fast charging into the holder. Features waterproof electronics, a rugged body, and safety guards to protect your phone. The ambidextrous lever can be switched from left or right. It has an adjustable foot base and expandable arms from 2 3/8" to 4" to accommodate a wide variety of phones. Necessary wiring harness is...

Genuine Mikuni replacement jets for various carburetor models, available in multiple styles including Hex-Type, Slotted Head, and Pilot Jets.

Genuine Mikuni main and pilot jets for tuning VM, TM, and TMX series carburetors. Sold in packs of 4, unless otherwise noted.

Great replacement flanges for Mikuni carburetors. Sold each. Made in Japan.

Genuine Mikuni replacement and tuning parts including needle and seat assemblies, jet needles, and needle jets for various Mikuni carburetors.

Genuine Mikuni fuel pump kits contain all gaskets, diaphragms, etc., required to rebuild Mikuni pumps. Made in Japan.

Genuine Mikuni replacement fuel pumps. Made in Japan.

A durable, windproof, and waterproof 3-season riding jacket with a built-in removable heated jacket liner that can be worn with or without the protective outer shell. This jacket plugs directly into your vehicle's 12V electrical system and features seven Microwire™ heating zones (collar, chest, sleeves, and back). It is constructed with a...

Features a removable 12V heated pant liner with connections at the bottom of the pant cuff for heated socks or insoles. It has an Aquatex™ breathable waterproof G-Liner membrane in the outer shell with a durable water-repellent (DWR) finish. The pants have four Microwire™ heating zones for legs and hips, direct ventilation on the thighs,...

Features a high-impact floating TPU knuckle, reinforced palm and fingers, and a pre-curved ergonomic fit. Made from premium cowhide leather with 150g insulation. Includes Microwire™ heating throughout the glove to the tip of every finger and an Aquatex™ breathable water-resistant membrane. Max heat: 57°C (135°F). Power: 12VDC @ 1.1A each....

Made with 100% aniline leather construction and feature Microwire™ heating throughout. Includes an Aquatex™ breathable water-resistant membrane, 150g Thinsulate™ insulation, and impact-protected gel pads at the palm. Features reflective piping and an adjustable hook-and-loop wrist closure. Plugs directly into a Gerbing jacket liner. Max...

A wind-resistant nylon chassis liner with taffeta lining designed to be worn as a mid-layer under a protective jacket. Features seven Microwire™ powered heat zones in the collar, chest, sleeves, and back that come to full temperature in seconds. The liner also serves as a connection point for Gerbing heated gloves, pants, and socks, with...

A wind-resistant nylon chassis liner with taffeta lining, designed to be worn close to the body under an outer jacket. It features seven Microwire™ heat zones: collar (1), chest (2), sleeves (2), and back (2). The liner serves as a 'home base' for Gerbing heated gloves, pants, and socks with pre-wired connections at the hemmed-cuff sleeves....

Constructed of windproof, durable, mini-ripstop nylon fabric, these pant liners feature four Microwire™ heating zones in the leg and hip. They can connect to an EX Pro jacket or jacket liner to create full-body warmth. Connections at the hem of each pant leg allow for connecting heated socks and insoles. A temperature controller is recommended....

Designed to be worn close to the body, under an outer jacket and over a thin polyester base layer. Features a mini ripstop nylon shell with a droptail back for improved coverage. Equipped with five Microwire™ heating zones: collar (1), chest (2), and back (2). Includes YKK® zippers and a pre-wired connector for pant liners. A temperature...

Constructed from aniline cowhide leather with 150g Thinsulate™ insulation and a high-impact floating TPU knuckle. Features a Superfabric palm/finger, pre-curved ergonomic fit, and Microwire™ heating throughout to the tip of every finger. Includes an Aquatex™ breathable water-resistant membrane, reflective piping, gel pads at the palm, and an...

Battery-heated gloves with Microwire™ heat technology and full front-and-back heating to the fingertips. Features a premium outer shell with Cyberian Cordloc system, Aquatex™ breathable water-resistant membrane, and Thinsulate™ insulation (40g top of hand, 40g palm). Includes a three-level on-board controller, two 7V batteries, and a dual...

A comfortable knit fabric hoodie with a powerful Microwire™ heating system, including 3 built-in heating panels on the chest and upper back. It features touch-button control, two pouch pockets, a hidden battery pocket, and a drawstring hood. The hoodie has ribbed cuffs and hem and is machine washable on a gentle cycle. Operates on 7V battery...

Features full front-and-back heating to the fingertips, a premium leather outer shell, and Microwire™ heat technology. Small reinforcement layers on fingertips provide extra grip and abrasion resistance. Index finger is conductive for smartphone use. Includes an Aquatex™ breathable water-resistant membrane and highloft insulation. Provides up...