All Products

ABS plastic construction. 6.5" lower speaker adapters (speakers sold separately). Matte black finish. Includes mounting hardware. Sold in pairs.

Quadcast, 4-channel amplifier. Rated at 75 watts x 4 @ 2-ohms (300-watts total). Cast-aluminum 3D design provides exceptional heat management and thermal performance in high-heat climates. Revolutionary new shape fits seamlessly inside fairing for easy install. Features R.E.M.I.T. circuitry for excellent FM reception from a Class D amp. Made...

Allows easy access to factory radios with built-in rear speaker outputs. Plugs directly into an empty 35-pin socket on back of radio. 4-pin plug also plugs into rear input on REV 450-AA amplifier. Wires are clearly labelled for easy installation. Note: This plug accesses the speaker leads of the radio but does not activate your radio's built-in...

Kit includes vinyl-covered rear speaker pods, grilles, mounting hardware and wire harness. Also includes wiring for bikes with car radios. Holds Hogtunes 5.25" front or rear model speakers. Supplied wiring will not plug into radio on FLHT/ FLHX and FLTR. Amplifier, OEM harness or car radio is required.

All grilles feature 1 mm thick mesh that comes painted semi-gloss black. Mesh separates easily from trim for painting, powdercoating, polishing, etc. Grilles can be used with most brands of speakers. Sold in pairs.

Well thought out design radically reduces standing water on speakers when parked. More of the speaker is exposed than current offerings ensuring maximum sound potential. Properly designed kit has speakers pointing towards the rider for optimal sound. Upgraded wire harness covered in "Nyla braid" with custom inline grommet for bags. Includes...

Factory Lid Cut-in kit with two REV 225-RM amplifiers, one pair of Hogtunes 462F-RM Fairing Speakers and one pair Hogtunes 692-XL 6" x 9" lid speakers. Includes single use templates for cutting lids, custom tooled speaker adaptors, Batwing and Road Glide front grilles with chrome and blacked-out badges, custom tooled silicone speaker gaskets, all...

Includes single-use templates for cutting lids, custom tooled speaker adaptors, grilles with chrome and blacked-out badges, custom tooled silicone speaker gaskets, all required wiring and plug-and-play harnesses. U.S. Patent No. D1022962.

200-watt, 4-channel amplifier (50W x 4). Includes upgraded, 100% plug-and-play harness. Complete with everything needed for installation.

Required if mounting any Hogtunes 2-channel amp in 99-13 FLTR/FLTRX. Kit includes steel mounting plates and all required hardware.

Required plate for mounting Hogtunes 4 channel amplifiers in Road Glide Fairings. Stamped (painted black) steel parts for perfect fit.

Plates allow Hogtunes 2-channel amp to be mounted inside the fairing to the left-side speaker cabinet as a stand-alone amp or as an addition to an existing system.

Includes high-impact ABS replacement saddlebag lids, 200-watt, 2-ohm motorcycle 6" x 9" speakers, grilles, gaskets, striker plates, grommets, wire harness and required hardware. Speakers offer superior bass response and overall better sound; large magnet assembly for higher power handling. Factory latch/lock mechanism bolts into new lids. Features...

Designed to work with or without Hog-Pod tweeter pod (PART #4405-0172) installed. Features three small front pouches and one large zippered pouch. Front right pouch has grommet to allow Hogtunes audio cable to pass through. Made by Saddlemen.

Kit includes two 5.25" 2-ohm front speakers with SGF Grill-AA metal mesh grilles. Speakers offer superior bass response and overall better sound, especially at riding speeds. Features carbon fiber woofer cone and titanium-impregnated 1" tweeter. Large magnet assembly for higher power handling. Features studio-quality polystyrene capacitors in...

Features carbon fiber woofer cone and titanium impregnated tweeter. Sound is tailored to cut through exhaust and wind noise when bike is at speed. Large magnet assembly for higher power handling. Speakers perform "best" when powered by an amplifier (sold separately). Metal mesh grilles with speaker adapters included. Sold in pairs.

Features carbon fiber woofer cone and titanium impregnated 1" tweeter. Sound is tailored to cut through exhaust and wind noise when bike is at speed. "Multi stacked" magnet assembly for higher power handling. Speakers perform "best" when powered by an amplifier. Metal mesh grilles with speaker adaptors included. Sold in pairs.

Upgrade from Hogtunes speakers, comparable to Wild Boar Audio speakers. Made to fit all years of factory saddlebag speaker lids and most aftermarket 5" x 7" lids; no cutting or modification required to factory lid. Speakers offer superior bass response and overall better sound, especially at riding speeds. "Multi-stacked" magnet assembly for...

Complete kit with 225-watt amp and XL Series 5.25" front speakers. Includes metal mesh grilles. Amplifier features R.E.M.I.T. circuitry for excellent FM reception from a Class D amp. All required plug-and-play wiring and hardware to complete the installation is included. Not compatible on CVO models with factory amplifiers installed.

Complete kit with dual 225-watt amps and front and rear XL Series 5.25” speakers. Includes metal mesh grilles for front speakers (PART #4405-0379). Amplifiers feature R.E.M.I.T. circuitry for excellent FM reception from a class D amp. All required plug-and-play wiring and mounting hardware to complete installation is included. Compatible with...

Complete kit with dual 225-watt amps and front and rear XL series speakers. Includes 5x7 mesh-front speaker grilles and Road Glide specific mounting plates for both amps. Amplifiers feature R.E.M.I.T. circuitry for excellent FM reception from a Class D amp. All required plug-and-play wiring and mounting hardware to complete the installation is...

A dash bag designed to fit around the sled gauge to maximize storage space. Features a main compartment for gloves and essentials, an internal mesh pouch for smaller items, a protected mesh storage compartment behind the headlight for goggles, and a snow-tight smartphone pocket with a clear vinyl cover.

Full-coverage 8" handlebar grips that cover both handlebars and hooks for a comfortable, clean-looking, constant-diameter grip surface. Designed to slide over the handlebar and hook after stock grips are removed. Manufactured from a dual-compound rubber for a soft, nonslip surface with excellent grip. The smaller-diameter gripping surface provides...

Molded handlebar hooks made from strong, lightweight nylon. Ultra Hooks improve leverage by widening bar width, and the dropped end increases cornering and general handling. Nylon construction won't rob heat from handwarmers. Easy to install with a Quick-Lock fastening mechanism that lets riders adjust the hook to their preference. Available in...

Mediazilla fairing with waterproof pull-out drawer, USB plug, and aux input. Includes AM/FM/CD/USB and Bluetooth compatible head unit and four 5" pre-wired speakers (160-watt output). Hand-laid fiberglass construction with 12" clear windshield.