All Products

Polyester wrap pretreated with silicone. Contains uniform micron openings so air can get in but dirt and other contaminants cannot. Silicone treatment deflects water splashed on the air filter. Uses sewn-in elastic opening to securely fasten to the air filter. Polyester wrap pretreated with silicone. Contains uniform micron openings so air can get...

A range of high-performance, washable, and reusable air filters designed to provide increased performance for a wide variety of motorcycles. Made in the U.S.A. for over 50 years.

K&N® delivers a premium oil filter built with a synthetic media specifically designed to withstand high concentrates of synthetic racing oils. A large filter media provides high-flow rates and outstanding oil filtration to keep your motor running clean and smooth. The filter is protected by a heavy-duty canister and base plate with a...

K&N® clamp-on air filter provides absolutely the best arrangement for good clean air and lots of it. What you need for all that extra horsepower fun. Universal in style, K&N snowmobile filter replaces the existing airbox and OEM stock filter.

One-piece steel base crankcase vents for competition use only. Can be mounted remotely with vent hoses and clamps (not included). Filter measures 2" OD x 1 1/2" high. Made in the U.S.A.

Direct OEM-style replacement carburetor air cut-off valve set. Provides diaphragm, spring and O-ring. Located on the side of the carburetor, the air cut-off valve prevents backfiring on deceleration. Temporarily closes the pilot jet airway to provide a richer mix as the throttle closes. Sold in sets for one carburetor.

OE or better quality replacements.

K&S DOT compliant turn signals are exact replacements of complete OEM assemblies at a fraction of the cost. These turn signals meet or exceed all government requirements for light output and durability, making them legal for all street or dual-purpose motorcycles. They are bubble packed for display and are sold with either an amber lens assembly...

Direct OEM replacement assemblies. Three-position petcock (off/reserve/main), unless noted.

A normally closed kill switch that kills the engine when the rider falls off. It attaches easily and features a 9.25" wire and a 51" tether. The bolt thread diameter is 10.5 mm.

Waterproof replacement cap for your spark plug with 5-ohms resistance. Fits allowable wire diameter of 7mm to 8mm. Set includes resistor cover and both end rubber caps.

Add style and safety to your bike. Sized to mount almost anywhere. Sold each.

Direct OEM-style replacement carburetor floats for Mikuni carbs. Includes float pin. Sold as a kit for one carburetor.

Features black body with clear lens. Replaces KTM OEM #60114025000/26000. Comes with 12V 10-watt bulb; replacement bulb also available separately. Measures: 125 L mm x 15 W mm x 54 H mm; lens dimensions: 80 L mm x 50 W mm x 27 H mm. Sold each. Features black body with clear lens. Replaces KTM OEM #60114025000/26000. Comes with 12V 10-watt bulb;...

DOT compliant replacement turn signals and lenses for a wide range of Kawasaki, Suzuki, and Yamaha motorcycles.

Features turn signal with right-, left- and center-push canceling; headlight with high-low beam; parking setting and horn. Comes with a kill switch and LED high-beam indicator light. 25" overall wire length with 9-pin connector. Features turn signal with right-, left- and center-push canceling; headlight with high-low beam; parking setting and...

12V electronic-type flasher relays with a maximum of 20A.

Individual fork seals and dust seals for Yamaha motorcycle models. Note: Some models may have multiple part number options; check fork seal dimensions before ordering.

Restore your motorcycle's appearance and keep debris away from its fork seals. Kit includes two fork boots and installation hardware. Poly-bagged with K&S header card.

OEM-quality front brake light switches.

Each kit contains all necessary O-rings, bolts, screws and diaphragm for a full petcock repair. Poly bag with K&S heavy-duty card.

Each kit contains all necessary O-rings, bolts, screws and diaphragm for a full petcock repair. Poly bag with K&S heavy-duty card.

Stem made of high-density engineering-grade plastic. 10mm threads. Y-spanner, joint screws with adapter nuts and installation instructions included. Available in black only. Sold in pairs. DOT approved. Stem made of high-density engineering-grade plastic. 10mm threads. Y-spanner, joint screws with adapter nuts and installation instructions...

Features 19" long wires and terminals. Two washers included.

Contains all parts necessary to repair and re-seal the clutch slave cylinder on models listed. PART #1132-1159 replaces Honda OEM #s 43353-461-771, 22864-MB0-003 and 91290-MB0-003. PART #1132-1161 replaces Yamaha OEM #s 26H-W0098-00 and 93109-08061.