All Products

Relieve pain in neck, shoulders and back with 2" of increased pullback from stock bar position. Maintains stock bar height and improves handling. Beautifully chromed billet aluminum construction. Works with stock lines and controls. Easy to install. Sold in pairs. Relieve pain in neck, shoulders and back with 2" of increased pullback from stock...

Custom exhaust tips with special cuts for a unique style. Each tip can be rotated into almost limitless positions and sold individually to mix and match. Features seamless mounting and a chrome finish. Made in the U.S.A.

Moves your floorboards forward for increased comfort. Adjustable - provides choice of an extra 2" or 4" of legroom. Repositions shifter and brake pedals appropriately. All necessary hardware is included along with simple to follow instructions. Made in the U.S.A. Moves your floorboards forward for increased comfort. Adjustable - provides choice of...

Add style to your front end. Taper front forks to a dynamic bullet point. Cover axles and exposed hardware. Very easy to install. Sold in pairs.

Includes progressively wound front fork springs and spacers. Perfect match to soup out the springs and spacers. Made in the U.S.A. Includes progressively wound front fork springs and spacers. Perfect match to soup out the springs and spacers. Made in the U.S.A.

Mounts directly to the bike's frame for strength. Fabricated from sturdy 1-1/4" diameter, 1/8" thick steel tubing with heavy-duty mounting flanges designed for each specific motorcycle. Ergonomic hoop style provides an excellent platform for aftermarket footpegs. Works with OEM windshields, lowers and floorboards. Mounts easily in just minutes....

H-Bar style handlebars that work with stock lines, cables and controls. Features a gloss black powdercoated finish. Made in the U.S.A. Dimensions: 27" width, 8 1/2" rise and 6" pullback. H-Bar style handlebars that work with stock lines, cables and controls. Features a gloss black powdercoated finish. Made in the U.S.A. Dimensions: 27" width, 8...

Custom and complete kits take the guesswork and effort out of selecting the correct cable and line lengths for your bike. Each kit comes complete with extended-length brake, clutch and throttle/idle cables (choke cable included when applicable). Available in Black Vinyl and Stainless Steel finishes.

CNC machined from billet aluminum. As an extension, moves bar up 1" towards or away from the rider. As an adapter, pullback will vary depending on riser spread. Comes with hidden handlebar mounting hardware for a clean look. Made in the U.S.A. Note: Not for OEM risers.

Effective pullback risers that relocate the handlebar closer to the rider for easier steering and control, relieving shoulder, neck, and back pain. Provides 4" of rise and 1 1/2" of pullback. Each riser has its own individual stylish cap. Works with most stock lines and cables and accepts 1" handlebars. Sold in pairs, easy to install.

Pulls handlebars back 2 1/4" closer to the rider with only 1" of total rise. Improves comfort and handling. Designed to match and complement the bike's original styling. Beautifully sculpted billet aluminum with no visible hardware for a super-clean look. Works with stock cables and lines. Made in the U.S.A.

Hand-machined, carefully polished and bathed in lustrous chrome. Faceted edges catch and refract light, adding a dynamic design element to your engine. Cover the area between cylinders, hiding the unsightly throttle bodies and their lines. Innovative mounting brackets are easy to install. To be used on bikes that have had the faux plastic air...

Gets rid of the large, unattractive sub-fender and huge license assembly. The integrated one-piece hidden mounting platform places your license on a sweeping angle, exposing more of your fat rear tire for an aggressive look. It includes a sculpted chrome license frame with integrated dynamic LED lighting. Recessed turn signal mounts allow use of...

Passenger floorboards and mounting brackets to improve passenger comfort and legroom.

Improves performance by fine-tuning your carburetor. Includes Baron's adjustable needle, Mikuni main jets, replacement float bowl screws and the allen wrench to remove the stock needle. Specially engineered to work with high-flow air cleaners. Some kits may be supplied with Baron's BMX. Made in the U.S.A.

Engineered to allow your shock to work effectively. This spring is a necessity for heavier riders or when carrying passengers. Improves damping control while eliminating bounce. Provides better control in corners and rough roads. Great with or without lowering kits. Sold each. Made in the U.S.A.

34-tooth front drive pulley raises the final drive ratio and allows the bike to cruise at a lower RPM. Optimizes gas mileage and performance at highway speeds. Installs easily utilizing stock belt. Solid steel construction provides years of use. 34-tooth front drive pulley raises the final drive ratio and allows the bike to cruise at a lower RPM....

Gives the gas tank a custom look. A special insert allows the use of a Baron polished stainless-steel, threaded cap instead of the stock locking cap. Quick and easy to install with two-part epoxy (included). Made in the U.S.A. Gives the gas tank a custom look. A special insert allows the use of a Baron polished stainless-steel, threaded cap...

Repels water, dirt and dust. K&N BAK filters are water-resistant, but extended riding in the rain is not recommended. Does not fit the Stealth Big Air kit that uses a K&N RE-5333 filter (does not fit K&N billet filter kits). Made in the U.S.A.

Stock horns are pretty ugly looking, so Baron designed this beautifully chromed accessory to cover them. Made in the U.S.A. Stock horns are pretty ugly looking, so Baron designed this beautifully chromed accessory to cover them. Made in the U.S.A.

Engineered to lower the rear of the motorcycle a safe and perfect 1". Makes it easier to hold up bike while stopped. Lowers the center of gravity for improved handling. Properly relocates the stock caliper to a new position to eliminate interference with fender. Lowering arms, caliper relocation bracket included. Made in the U.S.A. NOTE: Lowering...

Quickly and easily give your bike that low-down custom look. Includes brackets and all necessary hardware for a complete installation. Made in the U.S.A.

Dyno-tested for substantial increases in horsepower and torque by 8% to 10%. Patented design alters the velocity stack, which allows unrestricted airflow to the engine. The system clearly integrates under the fuel tank, replacing the ugly and restrictive stock airboxes. Gets rid of the restrictive stock airbox and filter, and replaces them with a...

Allows most Harley-Davidson®-style risers with 1/2" x 13 threads to be converted to mount on Honda, Kawasaki, Suzuki and Yamaha cruisers. Includes two studs, two aircraft nuts, two washers, two jam nuts and installation instructions. Easy to install.

Direct replacement for the stock plastic guard on Yamaha Road Star models. This beautifully styled and chromed guard is made of sturdy steel that does not dent easily like aluminum covers. It features a belt adjustment window and includes all necessary instructions and hardware. Installation does not require removal of the rear wheel. Direct...