All Products

Features a heavy-duty, extra-strength magnet that collects more shavings than the OEM plug. Includes O-ring. Sold each. NOTE: Not for use in primary case.

Chrome die-cast head measures 4" x 4". Available in Air-Glide or round-stem style. Universal mount (right or left). Sold each. NOTE: Requires mirror adapter DS-302148/DS-302149/0641-0096; see page 450.

Stops overtightening of the primary chain that can occur with the stock automatic adjuster. Reduces the stress on the motor sprocket bearings and transmission drive bearings. Allows correct adjustment of the primary chain to the factory specifications of 5/8" to 7/8". Requires removal of the primary cover for installation or adjustment. Uses the...

Single filament marker light bulbs. 12V/10W. Dimensions: 1.2" L x 0.220" dia.

Solid die-cast, chrome-plated construction. Allow marker lights to be mounted on the front forks for maximum visibility. Brackets measure approximately 8 1/8" L x 1 3/16" W with 3/8" light mount holes. Sold in pairs.

Die-cast aluminum construction clutch lever assemblies. Available in black or chrome finish to match OEM switch housings. Sold each.

Promotional metal tacker sign. Made from die-cut and embossed 0.025" aluminum. Measures 23.5" W x 7" H.

Direct OEM replacement. Sold each.

Relocates rear midway support clamp off rear pipe bend for improved mounting and appearance. Chrome kit includes two 1 3/4" pipe clamps (one each for the rear and the front) and one mounting hanger bracket. Fits Drag Specialties and other exhaust pipes.

Features chrome end caps with washable filter. Measures 1.5" in diameter and 1.6" high. Has a 1/4" mounting tab and accepts a 3/8" ID hose.

Steel construction. Rubber pads isolate the foot from vibration and add comfort on long rides. Splined male mounts allow you to adjust the angle of the footboards to the ideal position. Sold in pairs.

Features dual-function LEDs for high visibility. Light measures 4 1/2 in. W x 1 in. H. Aluminum license plate mount measures 6 3/4 in. W. Not DOT compliant.

12 mm round push-button switch includes a special radius-shaped spacer to allow mounting in handlebars. Great for turn signal, starter, horn, stop or hi-low operations (must be used with a relay). Includes two 20" wires; installing requires 9/32" drill and 5/16" UNF tap. Sold each.

Cool 60s look in a retro die-cast chrome housing with no visible bezel hardware for a clean look. Light body measures 1 5/8" in diameter with a 3 1/4" long body. Features a 5/16"-24 mounting bolt or stud mount. Dual-filament 12V bulb, amber and red lenses included. Sold in pairs.

Mechanically driven speedometers, with chrome body and polished stainless bezel, feature chromed custom steel mounts with handlebar clamps. They feature non-fluctuating indicators, 12V dial lights, and waterproof, vibration-resistant gauge construction. The 12mm thread accepts most speedometer cables (cable not included).

Feature four LEDs in one socket. Replace existing wedge bulbs in gauges, marker lights and fender tip lights. 12V, .5W.

Available in a chrome finish. Two required for FLT/FLHT applications. One required for Dyna Glide applications. Includes mounting hardware. Sold each.

Replacement chrome mounting block with hardware. Fits all 5 3/4" bottom-mount headlights.

Constructed of durable 1/8" rubber. Available in a variety of styles. Includes mounting hardware. Made in the U.S.A.

Chrome Timken-type bearing cups for custom frames that use bearing cups. Sold in pairs.

Replacement needle and seat assembly for HSR42/45 carburetors. Includes needle, seat and O-ring.

A die-cast and chrome-plated 12V light shaped like a classic, nostalgic motorcycle front fender light. Comes with mounting gasket, concealed mounting hardware and extra-long wire leads. Includes amber lens. A die-cast and chrome-plated 12V light shaped like a classic, nostalgic motorcycle front fender light. Comes with mounting gasket, concealed...

Threaded outer and inner adapters reduce O2 sensor port from 18 mm to 12 mm allowing riders to use exhaust pipes on select, newer-model motorcycles. Sold in pairs.

Reduces 18 mm bungs to 12 mm for 10-20 model sensors. Includes extension wire to allow the front sensor to reach the new installation location. Kit includes two adapters, extension wire, wire connectors and instructions.

Works with any O2 sensor port fitting. Two sizes available: 18 x 1.5 mm or 12 x 1.25 mm. Sold each.