New Products

For aftermarket and OEM spec applications. Cap for Mikuni VM26-34 mm carbs.

For Yamaha XV1600/1700 Road Star 99-07. With this adjusting your bike's air/fuel mixture screw has gone from an easy-to-get-burned finger job to a snap. Allows for easy-to-reach, tool-free tuning for weather and altitude. Enhances fuel efficiency while improving low-speed drivability. Do away with tiny screwdrivers and crawling around on your...

Generation II wideband air/fuel system to be used with data logging systems such as a dyno or the Mobile Dyno feature from TechnoResearch. Includes controller, Bosch LSU 4.2 sensor and sensor bung. Includes two Bosch LSU 4.2 O2 sensors with the Direct Link tuner are required with this box. Interfaces directly with any TechnoResearch VCM-TR3...

Plugs into the vehicle's diagnostic port and seamlessly integrates AFR data from the included wideband O2 sensor(s) with the OEM databus. When used in conjunction with a Power Vision CX, you can view and datalog wideband O2 data alongside custom channels directly from the vehicle's diagnostic port. Plug-and-play kit with no extra cables for power,...

Hose features a black nylon braided covering instead of a chrome or steel application. NOTE: Not to be used with fuel over 10% alcohol.

Grooved, chrome-plated hose ends give a finished look to rubber or braided oil/gas lines. Sold in 6-pk. to dealer.

Stainless steel braided hose can be used for any oil or gas application. Available in natural/silver only. NOTE: Not to be used with fuel over 10% alcohol.

Includes Wideband O2 or Dual Wideband O2 sensors and control box. Plugs directly into the Power Commander. The kit automatically adjusts the fuel map while riding. Includes O2 sensor bungs.

Real-time fuel adjustment. Displays channel data such as rpm, TP, map position (when using map switch), duty cycle, fuel exchange, ignition change and wideband air/fuel ratio (w/ WB2 or auto-tune connected). Weather resistant for use in all conditions. Log channels saved to internal memory and can be viewed/analyzed with Dynojet's Power Core...

A fuel injection tuning device with a compact design for discrete placement, allowing for easy upgrades and un-installs to revert to stock settings. Pair with other Dynojet accessories like the Autotune, Quickshifter or POD-300 for enhanced tuning. The analog input allows you to install any 0 to 5v sensor and build an adjustment table based on its...

The Power Commander 6 PTI is the same great tool as the Power Commander 6, but is perfect for turbocharged or supercharged applications looking for precision, control and reliability. It features a pressure input table for 3D mapping capability based on boost vs. rpm, a software table providing 2D mapping capability with up to 50 points of...

Plug-n-play fuel management device pre-programmed with make/model specific maps. Uses OEM-style connectors and high-quality wiring harnesses. Small, lightweight and easy to fit on the bike. No computer necessary to modify fuel management. Fully adjustable computer compatibility for ultimate tuning and personalization. Software is compatible with...

Allows you to activate a Power Commander for changing maps on the bike while disconnected from the bike. For limited use.

Add functionality to your Power Commander V with the Secondary Fuel Module (SFM) or the Quick Shifter Expansion Module (QEM). The SFM allows for adjustment of an additional set of injectors, common on high-performance sportbikes. The QEM allows the Dynojet quick shifter sensor to be used on bikes with eight injectors. Made in the U.S.A.

Flash performance tunes via OEM diagnostic connector, no need to remove and send out ECU. Display vehicle data channels in realtime. Weather-resistant for use in all conditions. High-contrast display, viewable in direct sunlight. Fueling revised for maximum power and torque. Spark timing optimized for 91-93 octane fuel. Rev limit raised. Speed...

Secure and optimal mounting solution for the perfect placement while driving. Provides secure attachment for the Power Vision 3 fuel tuner. Mounts to handlebars up to 1 1/4". Made in the U.S.A.

Unlock the true potential of the Dynojet Power Vision 3. Enables you to tune the original vehicle, perfect for retail/shop flashing. Each Power Vision 3 device will remember each license that is applied to it and will be able to flash any of these vehicles. Each license is vehicle specific, not device specific, which allows you to grow the tune...

Durable, die-cast body construction from chrome-plated brass. Features stainless steel springs, pin, latch, Viton® o-rings and acetal shutoff valves. Barbed hose ends provide simple attachment to common 1/4" and 5/16" hoses. Double shutoff valves prevent fuel leakage during disassembly. Perfect for fuel crossover or fuel line usage. Can withstand...

Made of corrosion-resistant stainless steel. Conventional style worm drive hose clamps. 7/16" hex head with screwdriver slot. Sold in packs of 10. For 7/16" to 1/2" hose

Direct OEM-style replacement carburetor air cut-off valve set. Provides diaphragm, spring and O-ring. Located on the side of the carburetor, the air cut-off valve prevents backfiring on deceleration. Temporarily closes the pilot jet airway to provide a richer mix as the throttle closes. Sold in sets for one carburetor.

OE or better quality replacements.

Direct OEM-style replacement carburetor floats for Mikuni carbs. Includes float pin. Sold as a kit for one carburetor.

Each kit contains all necessary O-rings, bolts, screws and diaphragm for a full petcock repair. Poly bag with K&S heavy-duty card.

This quality-made fuel line will not harden or crack. Fuel line is made of polyurethane and is available in 1/8” ID and 3/16” ID. Fuel line is available in 3’ lengths and the carburetor line comes in 5’ lengths. Not to be used with fuel over 10% alcohol. Made in the U.S.A.

Classic double-wire hose clamps for fuel or vacuum lines. Quality plated steel for long-lasting durability and function. 15-piece assortment pack offers five each of 1/4", 3/8", and 1/2" ID size. 150-piece assortment pack offers 50 of each size. Made in the U.S.A.