New Products

Nylon-reinforced vinyl fuel line. Braided nylon within the tubing wall provides added strength and flexibility against kinking. Won't harm fuel lines. Flexible down to -25 F/-3.8 C. Maximum dry heat is 150 F/65 C. Sold in 3' lengths and 25' rolls. Made in the U.S.A. NOTE: Not for use with fuel-injected engines.

Y and T fittings in sizes from 3/16" to 1/4". O-clips in sizes from 5/16" to 7/16". Acetal fittings are strong and light. Ideal for the shop or home mechanic. Made in the U.S.A.

Safe for use with fuel-injected bikes. When connected, fuel will flow and when disconnected, fuel will not flow. Use dual shut-off for fuel tanks equipped with a crossover line. Capable of withstanding temperatures from -40° F (-40° C) to 250° F (121° C). These quick-disconnect fittings utilize Viton®-type fluoroelastomer O-rings which...

Certified to meet permeation emission standards of 15g/M2/day. On emission-controlled vehicles, check with dealer for state and local law before use. Robust multi-layer design and construction. Showcases little to no fuel vapor loss. Highly resistant to ethanol-blended gasolines up to 100%. Highly flexible, easy to install and offers excellent...

Stronger and more durable than vinyl fuel line. Use with any type of gasoline. Resists swelling and hardening. Resistant to direct sunlight, hardening and/or cracking. Flexible in temperatures from -37.9 C to 73.9 C (-35 to 165 F). Can be used with in-line fuel filters or petcocks. Sold in 3' lengths and 25' rolls. Made in the U.S.A. NOTE: Not for...

Constructed of fuel-flexible plasticized PVC tubing. Safe for use with any type of gasoline or alcohol-type fuel. Smooth, slick tube helps prevent interior buildup. Recommended for venting and overflow lines. Flexible down to -17 C (0 F). Maximum dry heat temp is 104 C (220 F). Sold in 3' lengths and 25' rolls. Made in the U.S.A. NOTE: Not for use...

Convenient kit includes 80 pieces of hardware, a Motion Pro Side Jaw Pincer tool (P/N 08-0584) and five clamp sizes. Narrow 5 mm wide band provides concentrated seal compression. 360° Stepless® design with no gaps on inner surface. Specially formed strip edges reduce the risk of damage to the part being clamped. Lightweight design. Tampering is...

Provides straight-through fuel flow. Available for 1/4" and 5/16" ID fuel line. Can handle service temperatures of -40° C to 82° C (-40° F to 180° F). Viton®-type fluoroelastomer O-rings provide superior chemical resistance. Made in the U.S.A. NOTE: Not for use with fuel injected engines.

Each kit contains all necessary O-rings, bolts, screws and diaphragm for a full petcock repair. Poly bag with K&S heavy-duty card.

Billet aluminum construction with a black-anodized finish and a laser-etched logo. A must-have if carrying a passenger. Made in the U.S.A.

Billet aluminum construction with a black-anodized finish and a laser-etched logo. A must-have if carrying a passenger. Made in the U.S.A.

Billet aluminum construction with a black-anodized finish and a laser-etched logo. A must-have if carrying a passenger. Made in the U.S.A.

Billet aluminum construction with a black-anodized finish and a laser-etched logo. A must-have if carrying a passenger. Made in the U.S.A.

Billet aluminum construction with a black-anodized finish and a laser-etched logo. A must-have if carrying a passenger. Made in the U.S.A.

Re-pack your silencer with this pro-quality, three layer packing system to restore power. Kit contains 1/4" thick 60" x 20" glass mat, 7" x 20" stainless wool, 8" x 20" stainless mesh, twelve 3/16" rivets, and full instructions. Made in the U.S.A. Universal stainless repack kit

Re-pack your silencer with this pro-quality, three layer packing system to restore power. Kit contains 1/4" thick 60" x 20" glass mat, 7" x 20" stainless wool, 8" x 20" stainless mesh, twelve 3/16" rivets, and full instructions. Made in the U.S.A.

The latest in muffler packing technology. Contains Competition Muffler Packing in a universal, easy-to-install design. Pillow can be trimmed to length to fit muffler up to 20" long. Lasts 3-5 times longer than traditional packing. Resists breakdown up to 1,100 F. Made in the U.S.A.

Repack blown-out silencer for quieter running and more power. Long-filament fiberglass made especially for muffler packing. Measures 10.5" x 16", more than enough to repack virtually any 2-stroke silencer. Made in the U.S.A. Fiberglass muffler packing

Two-layer wrap consists of 304 stainless wire cloth and a very durable, high-temp stainless steel wool. Keeps engine performance and sound levels more consistent. Designed to fit cores from 1.75" to 2.125". Increases intervals between re-packs by 3 to 5 times. Made in the U.S.A.

Repack blown-out silencer for quieter running and more power. Long-filament fiberglass made especially for muffler packing. Measures 10.5" x 16", more than enough to repack virtually any 2-stroke silencer. Made in the U.S.A.

Low-weight, high-quality packing material. Lighter, quieter, and longer lasting than fiberglass mat packing. Resists breakdown up to 1,100 F. Sold in a 250, 500 or 750 gram bags. Made in the U.S.A.

Ideal for replacing rusted-out exhaust baffles or for custom fabrication. Baffles made of 16 or 22-gauge stainless steel with 1/8" diameter holes, 3/16" staggered centers. Made in the U.S.A.

Optional quiet baffle for Vance & Hines Big Radius exhaust systems. Sold each. Made in the U.S.A. Quiet baffle for big radius exhausts

Optional quiet and super quiet baffles for Vance & Hines Sideshots exhaust systems. Sold each.

Dampen sound without impeding flow-through performance. All-steel construction; baffles feature patented HP-PLUS design. Install easily on 1 3/4" or 2" 16- or 18-gauge drag pipes. Baffles held by 1/4"-20 screws and locking nuts. Made in the U.S.A.