New Products

Fiberglass-wrapped steel construction exhaust baffles. May require drilling a hole in the exhaust pipe for installation. Sold each.

Three-piece set gives any 1 3/4" ID muffler a perfect fit over three sizes of pipes. Reduces 1 3/4" ID to three sizes: 1 5/8", 1 1/2" or 1 3/8". Muffler and exhaust reducer set

Adapters allow mounting of 'classic' Triumph TR6/T120 63-70 mufflers on Hinkley Bonneville models for a classic look and exhaust note. Constructed of 18-gauge chromed steel and slips on stock header pipes to allow mufflers with 1 1/2" to be easily mounted. Sold in pairs. Muffler adapters for Triumph

Can be used on right or left side. 12" long and fits 1 1/2" x 1 3/4" inlet sizes. Sold each. Shorty muffler

Turnout-style muffler used to redirect exhaust. 19" length will fit either 1 3/4" or 1 1/2" diameter exhaust pipes. Slotted-style universal hanger allows for use on left or right side of the bike. Sold each. Turnout style muffler

Measures 19" L with a 1 3/4" inlet. Straight-through perforated-core type baffle. Includes universal-style hanger that is used with slotted channel on backside of muffler for left- or right-side use. 1 1/2" and 1 3/8" (three-pack) reducer kit included. Sold each.

Includes removable baffle. 1 3/4" inlet with reducer to fit 1 5/8" and 1 1/2". Available in standard and upswept styles. Sold each.

Period-correct tribute to performance exhausts of the era. Complete with inlet clamp, sliding bracket and sleeves for easy fitment. 1 5/8" ID without reducers. Sleeves are supplied to reduce ID to 1 1/2" or 1 3/8". Sold each.

Specifically made for most twin cylinder airhead model BMW motorcycles. Will not fit GS, LS, Monolever or Paralever model BMWs. Sold each. Left-side BMW muffler

Finished in heat-proof, flat black with a contrasting chrome tip. Smaller 17" length fits in more locations. Baffle is removable and repackable. Includes chrome inlet clamp, chrome universal sliding mounting bracket and three-piece reducer bushings. Fits 1 3/4" pipe and includes a three-piece reducer set. Sold each. Shorty megaphone muffler

26" universal muffler. Comes with multi-piece reducer set. Fits 1 3/4", 1 3/8", 1 1/2" and 1 5/8" pipes. Available in standard and wide-mouth megaphone styles. Sold each.

Features laser-cut Vance & Hines wrap clamps, black header wrap tape and locking stainless steel ties. Black, fiberglass composite wrap tape locks in heat and reduces the radiant heat by 50%. Kit will wrap two motorcycle headers thoroughly. Includes 2" W x 25' L roll of black wrap tape, two Vance & Hines Wrap Clamps and six locking stainless steel...

High-temperature exhaust sealing tape with adhesive. Designed to seal exhaust joints on the muffler when repacking or if needed where the muffler attaches to the head pipe. Max operating temperature is 525 F. Package includes two strips of tape; each measures 8" L x 1" W x 0.020" H. Made in the U.S.A. Exhaust tape

High-temperature exhaust sealing tape with adhesive. Designed to seal exhaust joints on the muffler when repacking or if needed where the muffler attaches to the head pipe. Max operating temperature is 525 F. Package includes two strips of tape; each measures 8" L x 1" W x 0.020" H. Made in the U.S.A.

Fiberglass cloth wrap available in black and tan. Stable at temperatures up to 2,000 F. Insulates exhaust header pipes to protect you or your machine from intense heat. Generous size roll is enough to wrap one long header or critical areas on multiple exhausts; measures 2" W x 50' L. Made in the U.S.A.

Wraps will increase power and reduce radiated exhaust heat. Kit includes 2" W x 25' L top-quality high-temperature wrap and four stainless steel tie wraps for that finishing touch. Wraps can withstand up to 2,000 F (1,093 C). Available in black.

Wraps will increase power and reduce radiated exhaust heat. Kit includes 2" W x 25' L top-quality high-temperature wrap and four stainless steel tie wraps for that finishing touch. Wraps can withstand up to 2,000 F (1,093 C). Available in black. 2" W x 25' L

Generate correct levels of backpressure for increased horsepower. Fully radiused edges for improved engine response, especially low-end torque. For use with stock or aftermarket exhaust systems. For 1 1/2" to 1 3/4" ID exhaust pipes. Sold in pairs. Made in the U.S.A. Torque cones

Allows you to open up your exhaust for straight-through flow by simply turning a screw. Slight power gains when used on modified motors. 4" diameter. Sold each. Made in the U.S.A. Exhaust end cap

Aluminized heat barrier with adhesive backing. Foil-coated fiberglass cloth adheres to body panels to protect plastic or fiberglass from engine or exhaust heat. Made in the U.S.A.

High-quality heat shields look great and keep you cool. Shields are triple chrome-plated and highly polished for a non-blueing look for years to come. Comes complete with clamps for mounting. Sold each. Made in the U.S.A.

Universal fit heat shields for use with 2" to 2 1/4" OD exhaust pipes. Measure 10" in length with a chrome-plated finish. Clamps included. Sold in pairs. Flaming skull heat shields

Allows select pre-closed-loop models to run newer style exhaust systems equipped with O2 sensor ports. Includes two zinc-plated plugs with sealing washers. Simply screw into nonessential sensor ports. Measures 10 mm x 1.25. O2 sensor port plug kit

Give your exhaust a sleek, finished appearance. Sturdy steel construction with a beautiful chrome finish. Easily replace stock muffler tips, require no modifications to stock exhaust. Include all necessary installation hardware. Sold in pairs. Turndown exhaust extensions

Perfect for high-temperature applications. Ball bearing and barb fastening assembly locks tightly and will not slip. Two lengths available; sold in packs of five. Made in the U.S.A.