New Products

Universal in-line resistors that work great with LED lights. Extra terminals included. Sold in pairs.

Ultra-compact design for LED turn signal applications eliminates the 'fast flashing' mode. Easy installation with no need for in-line resistors. This two-wire relay can replace the OE flasher or be used for custom builds. 4" wire available in black. Sold each. Ultra-compact design for LED turn signal applications eliminates the 'fast flashing'...

Plug-in that allows trailer wiring and relay kits to power trailers with a four-wire harness (run/left turn/brake, right turn/brake and ground). A fifth bonus wire is available to provide a fused 12V power supply to the trailer compartment for lights or keyless entry systems. Includes 4-pin flat vehicle connector. Sold each. Plug-in that allows...

A convenient way to get fingertip control of accent lights and other motorcycle electrical accessories. The cover has three switches, each is rated for 12V and up to 12A. Sold each. A convenient way to get fingertip control of accent lights and other motorcycle electrical accessories. The cover has three switches, each is rated for 12V and up to...

This kit is required when installing LED lights as turn signals on a motorcycle with a single turn signal indicator light. If this diode kit is not installed, power will backfeed across the indicator light and all turn signals will flash at once. One kit needed per bike. This kit is required when installing LED lights as turn signals on a...

A must-have to make all Kuryakyn Omni LED lighting products plug-and-play for '18-up Honda Gold Wings. This wiring adapter kit supports up to three Kuryakyn lighted accessories and features sealed, high-quality connectors that match OEM connectors. A must-have to make all Kuryakyn Omni LED lighting products plug-and-play for '18-up Honda Gold...

Required to install Kuryakyn rear lighting accessories. Once installed, all plug-and-play rear lighting accessories can be installed with ease. Provides run, turn, brake, and ground wiring connection behind the license plate center panel. Only one harness required. Required to install Kuryakyn rear lighting accessories. Once installed, all...

Corrects the fast flashing that occurs when replacing standard turn signal bulbs with LED bulbs. 12V.

Allows LED turn signals to operate in place of stock incandescent bulb turn signals without replacing the flasher module. Splices into the existing turn signal system. Allows LED turn signals to operate in place of stock incandescent bulb turn signals without replacing the flasher module. Splices into the existing turn signal system.

Allows LED turn signals to flash at the stock rate when replacing incandescent signals. Features a simple plug-and-go installation. Allows LED turn signals to flash at the stock rate when replacing incandescent signals. Features a simple plug-and-go installation.

Hood hinge mount brackets for mounting lights on automobiles. Hood hinge mount brackets for mounting lights on automobiles.

A holster designed to hold specific Speed Demon flashlights. A holster designed to hold specific Speed Demon flashlights.

A versatile LED keychain light perfect for tool boxes, glove compartments, and camping gear. Includes a carabiner clip, powerful magnet, bottle opener, and adjustable stand. Includes a Micro USB charging cord. A versatile LED keychain light perfect for tool boxes, glove compartments, and camping gear. Includes a carabiner clip, powerful magnet,...

Durable polycarbonate light covers available in a variety of sizes and colors to fit many Speed Demon lights.

Portable power packs for jump starting and device charging.

Corrects turn signals that stay illuminated and do not flash as a result of switching to LEDs. Corrects turn signals that stay illuminated and do not flash as a result of switching to LEDs.

Diode kit for metric cruisers with one turn signal indicator bulb. Kit is required when front turn signal bulbs are replaced with LEDs. Diode kit for metric cruisers with one turn signal indicator bulb. Kit is required when front turn signal bulbs are replaced with LEDs.

A no load, no heat load equalizer that prevents rapid turn signal flash when factory turn signal bulbs are removed or replaced with LED. One module needed per motorcycle. Features adjustable load setting. Dimensions: 4.2" L x 0.6" W x 1.4" H. A no load, no heat load equalizer that prevents rapid turn signal flash when factory turn signal bulbs are...

Replaces stock 2- or 3-pin flashers on most metric bikes. Only one unit needed when replacing stock turn signals with LEDs on front and rear. Maximum 120W. Replaces stock 2- or 3-pin flashers on most metric bikes. Only one unit needed when replacing stock turn signals with LEDs on front and rear. Maximum 120W.

Quick-disconnect for any two, three or four wire auxiliary lighting product. Features 22 AWG wires, 15" total wire length, and four-pin JAE connectors. Sold in pairs. Quick-disconnect for any two, three or four wire auxiliary lighting product. Features 22 AWG wires, 15" total wire length, and four-pin JAE connectors. Sold in pairs.

A universal brake light flasher with 10 user-selectable flash/strobe patterns. Features overcurrent, thermal, short circuit, and reverse wiring protection. 84W, 12V system. Works with LED or incandescent bulbs. Dimensions: 2.25" L x 1.25" W x 0.5" H. A universal brake light flasher with 10 user-selectable flash/strobe patterns. Features...

A die-cast and chrome-plated 12V light shaped like a classic, nostalgic motorcycle front fender light. Comes with mounting gasket, concealed mounting hardware and extra-long wire leads. Includes amber lens. A die-cast and chrome-plated 12V light shaped like a classic, nostalgic motorcycle front fender light. Comes with mounting gasket, concealed...

CNC machined from solid blocks of 6061-T6 billet aluminum with a pitch bolt mounting design for a clean look. Can be mounted either inward or outward from the fork tubes. Features super-bright amber LED lights, 1 1/2" wide, 1/2" tall. Lights are set at a 25° angle for standard H-D forks. Sold in pairs, made in the U.S.A.

Universal mount LED turn signals. Mount to any 5/16" or 8 mm hole. Super-bright LED lights measure 1 1/2" W x 1/2" tall. CNC-machined from 6061-T6 billet aluminum with wire feed out of the center of the mounting bolt. Turn signal dimensions: 2" L x 1" W x .85" H. Sold in pairs, made in the U.S.A.

Universal fitment light kit that mounts to any flat 4" x 6" space with included automotive-grade 3M™ VHB™ adhesive. Simple two-wire power/ground connection by splicing into any switched power circuit. Features ultra-bright LED illumination with crisp, sharp graphics.