New Products

Investment-cast stainless steel construction. Fit handlebars with 1" diameter in clamping area. Bottom clamps accept 1/2" x 13 mounting hardware. Includes stainless steel Allen cap handlebar clamp screws. Sold in pairs.

Durable closed-cell foam pad fits Moto Bars and other crossbar-equipped handlebars. Heavy-duty stitched-on vinyl cover. Easily change your look between a black and white Biltwell logo. 8.25" wide with a 2" OD and a 1/2" hole down the middle. Sold each. Durable closed-cell foam pad fits Moto Bars and other crossbar-equipped handlebars. Heavy-duty...

Chrome clamps cover the OEM casting marks. Simple peel-and-stick installation. Sold in pairs. Chrome clamps cover the OEM casting marks. Simple peel-and-stick installation. Sold in pairs.

Keep your bar-end weights and add some subtle style. Protect handguards and, to some degree, levers, from damage during tip-overs or low-side crashes. Direct bolt-on installation that retains use of the stock bar-end weights (install outside of hand guards). CNC-machined 6061-T6 aluminum. Sold in pairs.

Oil in the damper is kept under pressure to avoid free play. Three different systems give you smooth damping in all conditions. Base damping gives 18 adjustable settings (clicks) for maximum tuneability and control. Dampers mount across upper triple clamp, unless noted in chart. Öhlins steering damper kits for specific bike models come with all...

3-button housing includes high-quality switches with 36" leads. Work exclusively with Performance Machine Contour hand controls. Sold each. Made in the U.S.A.

Fill unsightly gaps between switch housings and grips. Performance Machine adapter allows the use of PM hand controls on most 1" OD diameter handlebars. For both left and right applications. Made in the U.S.A. NOTE: Some handlebars may require slight filing for proper fit.

Ultralight CNC-machined from 2011-T3 aluminum. Each set includes an extra adapter sleeve for mounting in either aluminum (14 mm ID) or steel (17 mm) handlebars.

Race-proven technology clip-on handlebars machined from solid billet with a removable handlebar. Handlebar can be replaced without buying an entire new clip-on assembly because handlebar is not welded to clamp. Clamp is CNC machined from a solid block of 7075-T6 aluminum. Kit includes both collars, two handlebar tubes with plastic ends and high...

Assist in minimizing crash damage in the event of a fall. Help reduce handlebar vibration. Available in black Delrin® plastic.

Replacement handlebars for Vortex clip-on sets.

Zero offset clip-on handlebar sets for specific fork sizes. Zero offset clip-on handlebar sets for specific fork sizes.

Allows the rider to easily tune the height of their handlebars. Can raise the height of the handlebar in 5 mm increments with a maximum height increase of 25 mm. Available in raw aluminum or black anodized finish.

Allows installation of LA Choppers or other handlebars with a 1 1/4" diameter clamping area. Threads are 1/2"-13. Metric adapters included to fit listed models. Sold in pairs. Made in the U.S.A.

A simple solution to adding a little rise and pullback to your handlebars and/or risers. Available in chrome, gloss black or flat black finish. Made in the U.S.A.

CNC machined from billet aluminum with a bright chrome or gloss black powdercoat finish. Drilled and tapped for 1/2"-13 mounting bolts. Riser caps feature a hidden hardware design for a unique, clean style. Metric adapters included. Sold in pairs. Made in the U.S.A.

Moves handlebars 1 1/2" up and 1" back or forward from the OEM position. Designed to work on any bike with a stock 1 1/8" Fatbar, parallel OEM bar clamps and open mounting area. Machined from 6061-T6 aircraft-grade billet aluminum. Includes mounting hardware, instructions, and step shims. Made in the U.S.A.

Provides 1 1/2" of total pullback, moving the bar approximately 1 1/4" up and 3/4" back from the OEM position. Clear anodized finish. Includes mounting hardware and works with stock cables. Made in the U.S.A. Provides 1 1/2" of total pullback, moving the bar approximately 1 1/4" up and 3/4" back from the OEM position. Clear anodized finish....

1 3/4" center-to-center rise with 26 mm stem. Pivot forward or backward depending on rider preference. Black anodized finish. 1 3/4" center-to-center rise with 26 mm stem. Pivot forward or backward depending on rider preference. Black anodized finish.

Sleek, stylish design risers that fit most applications with 7/8" handlebars and a 7/8" bar clamp. Machined from billet 6061-T6 aluminum with an anodized clear finish. Made in the U.S.A. Sleek, stylish design risers that fit most applications with 7/8" handlebars and a 7/8" bar clamp. Machined from billet 6061-T6 aluminum with an anodized clear...

2" rise risers that fit many makes/models of cruiser bikes with a 1" diameter bar and an open mounting area. Machined from 6061-T6 aluminum. Risers do not work on Yamaha V-Star 1300. Made in the U.S.A.

Reduces bar vibration and hand tingling/numbness. Risers pivot Forward/Backward. 2" of rise, 1 1/4" stem, accepts 1 1/4" handlebar. Designed to use the stock BMW caps/bolts on the top of the risers. Work with stock cables. Made in the U.S.A. Reduces bar vibration and hand tingling/numbness. Risers pivot Forward/Backward. 2" of rise, 1 1/4" stem,...

Pivoting riser kits that can be positioned forward, backward or anywhere in between. Bottom fits 1" handlebar clamps; 1" bar clamp on the top side. Constructed from aircraft-grade aluminum (6061-T6). Made in the U.S.A.

Very easy installation with a lifetime warranty. Provides 1 1/2" rise and moves the handlebar 1.5" up and 1.2" back. Works with OEM cables and lines. Black anodized finish. Made in the U.S.A. Very easy installation with a lifetime warranty. Provides 1 1/2" rise and moves the handlebar 1.5" up and 1.2" back. Works with OEM cables and lines. Black...

Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position. Engineered and tested for maximum strength and durability. CNC machined from billet 6061-T6 aluminum, then anodized for long-lasting good looks. Made in the U.S.A. Note: Longer cables may be required when installing handlebar risers on some models.