New Products

Massive 1 1/2" tubing suits the size of the VTX. The most comfortable drag bar you will ever ride with. A radius bend softens the look of the conventional drag bar, and sweptback risers place the bar in an easier-to-reach position. Special width provides reduced steering effort. Thick tubing walls reduce bar vibration, minimizing hand and wrist...

Makes the bike easier to steer and feels like it lost 200 lbs. 13" of pullback reduces reach and improves back position. Lower grip point relaxes shoulders for added comfort. Realigned wrist position reduces or eliminates numbness. Improved bar length increases leverage. Works with all stock cables, lines and controls. Chrome finish. Direct...

Custom-designed to be the perfect drag bar. Sits low and close to the tank, enhancing the aggressive look of your bike. Specialty bends provide additional leverage for easier control of your ride. Fabricated from 1 1/4" diameter polished and chromed steel. Fits with stock control lines and comes pre-drilled for internal wiring. Made in the U.S.A....

Old-school biker cool meets new-school comfort. Ape hanger style re-engineered to provide comfort while still projecting attitude. Rider's arms are allowed to hang and drape effortlessly, taking pressure off the neck and back. Improves steering control while reducing effort, making bike easier to control. Massive 1 1/4" tubing truly makes you a...

The most comfortable drag bar you will ever ride with. A radius bend softens the look of a conventional drag bar and sweptback risers place the bar in an easier-to-reach position. An ergonomic bend provides the rider with much-improved comfort and steering effort is reduced by increased leverage. Large-diameter tubing enhances the bike's...

These handlebars will make your bike feel like it lost 200 lbs. More rider benefits at less cost than pullback risers. Provides comfort, control and great looks all in one handlebar. Reduces riders' reach, makes the bike easier to steer and handle better. Relaxes neck, shoulders, back and wrists while riding. Pulls grip-point back closer to the...

Adds comfort and improves control. 11 1/2" of pullback relieves the pain most riders feel in the neck, shoulder and back. Ergonomic design provides additional leverage, making the bike easier to control and allowing the rider to relax their shoulders. Flat track racer styling lends itself well to an aggressive size. Works with all stock controls,...

Uniquely shaped and specially designed for long cruises and touring. Eliminate stress and pain in the lower back with a new and improved rider position. Make those last 100 miles feel like a breeze. Made in the U.S.A. Dimensions: Width: 32", Rise: 8", Pullback: 16 1/2". Uniquely shaped and specially designed for long cruises and touring. Eliminate...

H-Bar style handlebars that work with stock lines, cables and controls. Features a gloss black powdercoated finish. Made in the U.S.A. Dimensions: 27" width, 8 1/2" rise and 6" pullback. H-Bar style handlebars that work with stock lines, cables and controls. Features a gloss black powdercoated finish. Made in the U.S.A. Dimensions: 27" width, 8...

Ape Hanger handlebars add aggressive style. Features a gloss black powdercoated finish and accept stock controls. Both styles measure 29" wide with 6" of pullback. Will require a cable kit (sold separately, see page 448). Made in the U.S.A.

Handlebars for motorcycles with a 1" clamping area and 3 1/2" on-center risers. Mitered tips for an enhanced, customized look. 1 1/4" double-walled bar for added strength and unique styling. Direct bolt-on design does not require aftermarket cables or wiring. Compatible with all 1" grips and stock levers. Made in the U.S.A. Dimensions: End Rise...

Ape hanger handlebars with a textured black powdercoat finish. The 1" tube steps down to 7/8" to mate to stock controls and runs a 1" clamp area. Works with both DCT and non-DCT models. Dimensions: End Rise 12", Width 36.5", Center Width 12", Pullback 8.75". Ape hanger handlebars with a textured black powdercoat finish. The 1" tube steps down to...

Fits Custom Dynamics mirror side M8 x 1.25" mounting stem. Sold in pairs. Fits Custom Dynamics mirror side M8 x 1.25" mounting stem. Sold in pairs.

Popular ape hanger styles made from high-strength carbon steel. Available in brilliant chrome or black finishes. Verify handlebar dimensions before ordering.

Easily mounts around handlebars. Uses two-piece clamp for easy installation without having to remove other components off handlebar. Available in black or chrome finishes. Standard 10 mm threads along with 10 mm left-handed threads. Sold each.

Reduce or increase thread size to allow mounting on 8mm or 10mm applications. Convert left-hand threaded applications to right-hand threaded mirrors. Mirror risers raise mirror approximately 1". Available with black or chrome finish. Sold each.

Mid-bend design for performance applications. Super strong and lightweight. Notched for electronic throttle control with large drill-outs for internal wiring. Knurled on 3 1/2" centers with a 1" diameter center clamp area. Can be used with high or low riser clamps. Gloss black finish. Dimensions: End Rise 3 3/4", Width 30 1/2", Center Width 4...

Easily fits over stock kill switch. Features a stamped locator line to provide visual identification of its position. Available in chrome. Easily fits over stock kill switch. Features a stamped locator line to provide visual identification of its position. Available in chrome.

Great finishing touch for handlebars. Made from die-cast aluminum. Sold in pairs. Great finishing touch for handlebars. Made from die-cast aluminum. Sold in pairs.

Constructed from billet aluminum with a stainless steel pivot that rides in a unique nylon bushing. Mirrors never lose adjustment or rust at the pivot. Include all necessary mounting hardware. Micro head measures 4.5" x 3.0". V2 cut-out stem measures 5.5" x 2.5". Sold each.

Constructed from billet aluminum with a stainless steel pivot that rides in a unique nylon bushing. Mirror never loses adjustment or rusts at the pivot. Includes all necessary mounting hardware. Mini teardrop head measures 4.5" x 2.75". V2 cut-out stem measures 5.5" x 2.5". Sold each. Constructed from billet aluminum with a stainless steel pivot...

Unique stainless steel pivot rides in a special nylon bushing; mirror head will never lose adjustment or rust at the pivot. Unsightly adjustment screws on the back of the mirror head are eliminated. All necessary metric and standard hardware included.

Replaces commonly worn or lost pivot bolts for brake or clutch levers. Includes correctly sized nut. All measurements in millimeters. Sold in 10 pk unless noted.

Replace the plugs that cover the screw-in clamps on handlebar master cylinder. Brilliant chrome finish. Sold in pairs. Replace the plugs that cover the screw-in clamps on handlebar master cylinder. Brilliant chrome finish. Sold in pairs.

Precision die-cast aluminum construction with stainless steel ball joint mounting hardware. Tempered glass mirrors available in 4" round, 2 1/2" x 4" rectangular shape or 5 1/2" teardrop shape. Clamp-on mirrors include CNC-machined 6061-T6 aluminum 7/8" or 1" ID P-clamps for mounting on handlebars. Clever ball joint assembly inside the mirror...