New Products

Adjustable tension design is a universal fit for most commonly used throttle sizes. Made of Nylatron® thermoplastic resins for wear/impact resistance, tensile strength, light weight and high cold/heat tolerance. Adjustable tension gear design is easy to install or remove with one hand. Set the required tension as needed when changing to new...

Features turn signal with right-, left- and center-push canceling; headlight with high-low beam; parking setting and horn. Comes with a kill switch and LED high-beam indicator light. 25" overall wire length with 9-pin connector. Features turn signal with right-, left- and center-push canceling; headlight with high-low beam; parking setting and...

Slim, universal-use headlight switch. Includes five eyelet terminals, five bullet terminals and insulator covers. Slim, universal-use headlight switch. Includes five eyelet terminals, five bullet terminals and insulator covers.

Sleek, angular design to complement the lines of the bike. Ergonomic feel for comfortable, effortless pullback. Made from quality aluminum. Sold in pairs. NOTE: Compatible with DCT models; however, the clutch lever will not be used.

Wider than stock for a more comfortable fit to the hand. Levers are chrome. Sold in pairs.

Ergonomic finger grooves for comfortable and controlled pullback. Contours and dished back for high leverage with minimal pull. Include a set of grooved and zombie medallions to add that finishing touch. Chrome finish. Sold in pairs. Ergonomic finger grooves for comfortable and controlled pullback. Contours and dished back for high leverage with...

Stylish wind protection for your hands. Mounts are E-coated aluminum, guards are rubber isolated. Made of Lucite in and black opaque. Includes black mounting hardware. Stylish wind protection for your hands. Mounts are E-coated aluminum, guards are rubber isolated. Made of Lucite in and black opaque. Includes black mounting hardware.

Heavier duty replacement for OEM throttle sleeves. Made from nylon fabric composite material, they will not scar bars like aluminum sleeves. Features a one-piece tube and reel design. Available in fixed-end, open-end and pop-out end styles.

Quality polished alloy replacement lever. Poly-bagged with header card and labeled for easy identification. Sold each. Quality polished alloy replacement lever. Poly-bagged with header card and labeled for easy identification. Sold each.

Satin black LED switch block assembly. Easily control auxiliary driving or marker lights. Satin black LED switch block assembly. Easily control auxiliary driving or marker lights.

Incorporates three rocker-style switches with amber LEDs. Offers convenient control of auxiliary driving, fog or marker lights. Specifically designed to fit the OEM master cylinder for a clean, integrated look.

Heightens braking control and sensitivity to the brake pedal. Provides a stiffer, more structured feel to their brake pedal. Made of hardened aluminum alloy. Mounts through existing holes in the frame with no drilling required. Heightens braking control and sensitivity to the brake pedal. Provides a stiffer, more structured feel to their brake...

Large capacity drink holders designed to work with 30 oz. tumblers and other large bottles and cups. Made from durable neoprene rubber with a rubber molded net to securely grip your container. Easily removable with ball mounting system. Available with or without mounting clamps for various handlebar sizes.

An oversized drink holder with a soft, contoured rubber neoprene basket and rubber-lined ring. Designed for drinks up to 9" in height and 3 lbs. total weight. Compatible with Ciro Gen 2 ball mount system (sold separately). An oversized drink holder with a soft, contoured rubber neoprene basket and rubber-lined ring. Designed for drinks up to 9" in...

Let your colors fly day and night. Built-in white LEDs are powered by any 12V source. Includes American flag, but can be used with any 6" x 9" flag. No drilling required; mounts sold separately.

According to legend, evil road spirits have been latching on to motorcycles ever since two wheels hit the road; Guardian Bells® drive off evil spirits. Give the gift of good luck and protection. Sold each.

Easy, out-of-the-way flag mount. Sturdy aluminum construction. Flag measures 4 1/2" x 8 1/2" with a total height of 12". Stays in place with setscrew. Will also fit any tube with approximately 0.6" OD. Easy, out-of-the-way flag mount. Sturdy aluminum construction. Flag measures 4 1/2" x 8 1/2" with a total height of 12". Stays in place with...

Improves access to the kickstand; can be used on almost any motorcycle. Fully adjustable. If used with Kuryakyn's Driver Floorboard Kits, you can access the kickstand without having to fold up the floorboard. Sold each. Improves access to the kickstand; can be used on almost any motorcycle. Fully adjustable. If used with Kuryakyn's Driver...

CNC machined 6061-T6 aluminum top with laser-cut stainless steel bottom plate. Provides additional surface area to keep kickstand from sinking into soft surfaces. Outer edge can be utilized to break beads on flat tires during roadside or trailside repairs. Serrated edge on the bottom plate adds traction to help deploy kickstand in wet or muddy...

Chromed kickstand is super-strong and looks great. Footpad design resists sinking into warm blacktop. Easy to reach, even when running floorboards or aftermarket shifters. Sold each. Chromed kickstand is super-strong and looks great. Footpad design resists sinking into warm blacktop. Easy to reach, even when running floorboards or aftermarket...

Clamps on to kickstands that measure 1/2"-3/4" in diameter. Extends out either 2 7/8" or 4 3/8". Chrome finish. Sold each. Clamps on to kickstands that measure 1/2"-3/4" in diameter. Extends out either 2 7/8" or 4 3/8". Chrome finish. Sold each.

Small emblems are exact replacement emblems for Kuryakyn PART #s 271626, 271911. Also great just about anywhere, just a simple peel-and-stick application. Sold in pairs.

A high-quality double flag holder and poles made from hand-polished stainless steel that will never rust or tarnish. It mounts easily to all license plate holders and remains sturdy at highway speeds. Made in the U.S.A. A high-quality double flag holder and poles made from hand-polished stainless steel that will never rust or tarnish. It mounts...

Slides over stock kickstand foot to double the surface area of the foot; no more hauling around a kickstand plate. CNC-machined billet aluminum construction with black-anodized finish. Secures with setscrew. NOTE: Not for use with driver floorboards.

A trunk-mounted double flag holder kit made from hand-polished stainless steel. It is designed to use existing trunk holes on the Can-Am Spyder F3 and doesn't interfere with trunk opening or brake lights. Made in the U.S.A. A trunk-mounted double flag holder kit made from hand-polished stainless steel. It is designed to use existing trunk holes on...