New Products

Each kit includes the lower shock bearing, all the shafts, seals and spacers in the link, link arm and lower shock mount. 52100 bearing steel and hard-plated spacers resist wear and rust.

Kit includes the shock bearing, seals, spacers, and pins (if required) to rebuild the upper shock link. Premium design and construction stands up to tough conditions. Older bearing and seal designs updated to the latest in bearing technology.

Bolt-on shock valving for riders serious about suspension performance. Improves control, traction, plushness and resistance to bottoming. Outstanding tunability; improved valving. Any qualified mechanic can install it. Bolt-on shock valving for riders serious about suspension performance. Improves control, traction, plushness and resistance to...

Sold in a set of one oil seal and one dust seal.

High-quality, high-performance shock springs. Shot-peened and heat-treated for durability. Made of high-grade chrome silicon spring steel. Preset to avoid sacking out; guaranteed not to sag. Outstanding stiffness-to-weight ratio. Measures 275 mm L x 59.5 mm ID 1 x 62 mm ID 2.

Installs easily between the seal head and the compression baseplate on the shock shaft. Lowers the bike one to four inches. Kit includes spacers in thicknesses from 2 mm to 15 mm. Available for two shock shaft sizes. NOTE: Not for shocks with top-out spring.

This unique valve design has separate ports that allow oil to flow in different rates for compression and rebound. The Rebound Separator Valve improves traction on the small bumps during compression and rebound which makes the lowest speed damping too mushy causing bottoming and an unresponsive chassis that packs during braking. The standard...

Precision-machined suspension shims. Resist permanent distortion, even in the most demanding conditions. For most shocks and forks. Sold in 10-pack.

Use on lower high-performance sportbikes for a lower center of gravity, resulting in better launches off the line. Give riders more confidence and make reaching the ground easier. Most lowering links have more than one height adjustment to accommodate your specific needs. Include holes for adjusting ride height as noted in chart (Hole 1=1"; this...

High-performance damper with dual springs for Honda CMX1100 Rebel. Main spring absorbs big hits, while the secondary spring smooths out minor road imperfections. Shocks are length-adjustable from 12.5" to 13.5". May require modification to exhaust brackets or belt guard to clear. Sold in pairs. NOTE: Before purchasing or attempting to install...

Stubby 10.5" eye-to-eye measurement shocks for Honda CMX Rebel. Preload-adjustable to tune to rider weight. Made in the U.S.A. Made famous by the Burly Slammer Suspension Kit but now available on their own. Stubby 10.5" eye-to-eye measurement shocks for Honda CMX Rebel. Preload-adjustable to tune to rider weight. Made in the U.S.A. Made famous by...

Complete lowering kit for Honda CMX1100 Rebel. Includes 10.5" shocks with springs and covers, and fork springs. Easy-to-install fork springs that do not require the removal of forks. Drop-in fork springs lower front end up to 2", and shocks lower rear up to 2½". Complete lowering kit for Honda CMX1100 Rebel. Includes 10.5" shocks with springs and...

Features adjustable rebound damping, monotube shock with internal reservoir, high pressure nitrogen gas charged STX single tube design, 46 mm piston diameter, and adjustable preload w/ billet tool. Multiple spring rates available to accommodate a wide range of riders. Offers top level comfort, rideability and performance with hard anodized,...

A range of Öhlins shock absorbers with various types and adjustments for a wide selection of motorcycle models.

The newest version of Öhlins championship-winning twin-tube shock technology. Features needle profiles for compression and rebound adjusters. Updated design results in improved oil flow guidance and volume control for more precise, consistent damping and better fine-tuning. Available range of preload and compression adjustment is wider. Rebound...

Stops leaking forks. Kits include a pair of oil seals, a pair of dust seals and wipers. Meets or exceeds OEM standards.

Gas-charged progressive rate gas damper with a straight rate spring and threaded preload adjustment. Designed for the Honda Grom 125.

Gas-charged for superior, fade-free damping and consistent operation. Features a six-stage, automatic damping designed with a special anti-topping function and double-wall shock body construction for piston protection and long life. Shocks are sold in pairs. Springs are sold separately. NOTE: Many fitments are available with either Standard or...

Nitrogen-charged shocks with multi-stage, velocity-sensitive valving automatically adjust to riding conditions. Complete shock assemblies include chrome springs and covers. Designed specifically for cruiser and touring bikes. Progressively wound steel spring provides superior ride and handling. A five-position cam-style preload adjuster allows you...

Comprehensive fork oil and dust seal kits for a wide range of motorcycles and scooters. Kits are available as a complete set with both oil and dust seals, or as separate 'Fork Seals Only' and 'Dust Seals Only' packages to meet specific maintenance needs.

A high-performance steering damper with a twin-tube system to ensure clamping force doesn't obstruct the damping piston. Features a hard-chromed piston rod, one-piece piston rod for perfect alignment, and triple-function seals. A nitrogen-pressurized heat expansion reservoir prevents air bubbles and compensates for oil expansion. All parts are...

Model-specific bolt-on mount kits for Hyperpro steering dampers. Designed for the best fit, these kits are required for damper installation and are sold separately. Unless noted, the damper mounts across the top of the tank in the Ducati 916 style.

Individual fork seals and dust seals for Yamaha motorcycle models. Note: Some models may have multiple part number options; check fork seal dimensions before ordering.

Restore your motorcycle's appearance and keep debris away from its fork seals. Kit includes two fork boots and installation hardware. Poly-bagged with K&S header card.

Revolutionary low-friction design ensures high-quality suspension performance. Constructed of FEP and tin composite, these PTFE-coated bushings have the lowest friction properties available. Inner bushings mount on the inner (chrome) fork tube and have PTFE on the outside of the bushing; outer bushings mount on the outer (aluminum) fork tube and...