New Products

Replaces OEM starter flex shaft.

Designed to be used with the OEM starter. Kits include brushes, bushings, bearings, seals and insulators. Some kits also include the brush holder.

Replacement starter solenoids for a wide range of snowmobile models.

Mounts your Hardline hour meter using your OEM gas tank or frame bolt hole. Works on any Hardline meter housing (old or new generation). Made from aluminum that will not corrode.

Keeps track of important maintenance times for your bike including oil changes, valve adjustments, spark plugs, etc. Includes a log book to record service details. Usable with any gas engine, it records and displays up to 9999.9 hours (total hours not resettable). It attaches with peel-and-stick or enclosed hardware, connects to the spark plug...

Tracks service time and rpm for timely oil changes, valve adjustments, and spark plug replacements. Features resettable maximum rpm, adjustable input for dual or single spark ignition systems, and real-time tach reading up to 20k rpm. Includes a log book. Records total hours up to 9999.99 (not resettable). Usable with any gasoline engine, it...

An advanced, accurate, and reliable wireless hour meter that is quick and easy to install. It automatically starts and stops by sensing the engine's resonance, requiring no wiring. Features resettable trip and total-hours-accumulated modes. The unit is waterproof, shock-resistant, has a 5 to 7-year battery life, and comes with a log book. It works...

Features a resettable timer and service modes that flash service messages at 5, 10, and 20 hours of operation. Provides real-time tachometer reading up to 20k rpm and records max rpm. It keeps track of total accumulated time for maintenance on oil changes, valves, and spark plugs. Includes a log book. Usable with any gas engine, it connects to the...

A steering stem mount for a Hardline hour meter.

State-of-the-art, high amperage, plug-and-play wiring harness. Designed to provide hassle-free installation and operation with existing lighting setup. Utilizes a unique connector only compatible with Speed Demon 40" and 50" Hi-Lux 2.0 straight light bars; connector must be removed for a hard-wire installation. Features weatherproof on/off switch...

A normally closed kill switch that kills the engine when the rider falls off. It attaches easily and features a 9.25" wire and a 51" tether. The bolt thread diameter is 10.5 mm.

An OEM-type replacement kill switch designed to match stock units. The circuit is open at normal position.

A wide range of high-quality digital gauges, meters, data loggers, sensors, and accessories from KOSO North America, designed to monitor various aspects of snowmobile performance including RPM, temperature, voltage, and more.

Keeps track of important maintenance times for oil changes, valve adjustments, spark plugs and more. Usable with any gas engine. Records and displays up to 9999.9 hours, which automatically roll over. Includes a log book and can be attached with supplied hardware or peel-and-stick application. Connects to spark plug wire, so no batteries are...

A resettable hour meter for use with motorcycles, ATV, UTV, snowmobiles, and PWC. It helps track service intervals for oil changes, valve adjustments, spark plugs, etc. Installation is easy with peel and stick or enclosed hardware. It connects to the spark plug wire and requires no battery. Works on any gas engine. Made in the U.S.A.

An advanced, accurate, and reliable hour meter that is quick and easy to install with no connections required. It automatically starts and stops by sensing engine resonance. Includes resettable trip and total hours accumulated modes, double-sided tape, mounting screws, and a log book. The unit is waterproof, shock-resistant, and has a built-in...

An XL eyelet terminal connector for 3/8" terminals, compatible with most Genius Battery Chargers.

For use with almost any 7-pin trailer wiring on a vehicle. Seamlessly integrates reverse lights without needing to splice into factory wiring. Plug-n-play install. Comes with a weatherproof DT connector. Works with all Speed Demon lights using a DT end. Works on cars with AMP connectors. Splitter addition (sold separately) will allow a two-light...

OEM-style regulator/rectifiers for Polaris and Yamaha snowmobiles.

High-quality, low-cost alternative to OEM starter motor. Affordable starter is constructed with longer-life bearings than OEM. Many OEM starter motors have an unprotected output needle bearing on the outside of the output shaft's seal; moisture can and does enter the output cap of the electric motor and follows the armature shaft to the...

Replacement high-quality solenoid switches.

Handlebar-mounted push-button engine kill switches constructed of 100% waterproof billet aluminum. The push-down-and-hold function prevents accidental shutdown, and the momentary action springs back to run automatically when not pushed down. Custom waterproof heat shrink/epoxy wire connectors are included. Made in the U.S.A.

A compact and lightweight adapter that plugs directly into a battery charging SAE plug to charge devices. It charges most cell phones and smartphones requiring 1A or less. Features an input voltage of 12V, output of 5V/1A, and a green LED function light. Adapter to convert an SAE plug to a USB charging port.

A collection of wiring harnesses, connectors, adapters, and miscellaneous hardware for snowmobile lighting systems.

Direct OEM replacement starter wire plug. Used to repair damaged or corroded wire connectors or replace individual damaged components within your machine's wire harness.