New Products

Carbon steel stud with four flat sides that increase surface area and paddle snow. A unique design by Woody's featuring a through-hardened stud with 5/16" threads and a 60° carbide insert for durability and excellent hookup. For use in two-ply tracks and support plates.

Push-through competition stud made from through-hardened carbon steel with a carbide point sharpened to 45°. Designed to hook up enduro, ice oval and cross country racers. Features Woody's uniquely designed track-trapping head for unbeatable stud rigidity and support.

High-grade, lightweight aluminum support plates for 5/16" threaded studs. For most single and combination studding patterns. Quick and easy to install - no indexing required. Available in natural finish or six powder-coated colors.

High-grade, lightweight aluminum support plates for 7mm studs.

Entry-level stainless steel studs, affordable for beginners. Features anti-corrosive properties with 5/16" threads and a 60° carbide insert to protect the stud and penetrate the terrain. For use in two-ply tracks and support plates.

Push-through competition stud designed for stock race sleds with a 1.750" lug. Made from through-hardened carbon steel with a 60° carbide insert and 5/16" threads. Includes Woody's Tall Big Nuts.

High-grade, lightweight aluminum support plates that require indexing so edges run parallel with the track's edge, acting as a great re-torque indicator. For all single and combination studding patterns. Must be paired with corresponding stud shank size.

Easy to use tool for sharpening studs while they're on the sled. Place the tool into a 3/8" drill chuck to operate. Available in 30° and 60° angles.

Tool to install and remove push-through studs. Handle made from premium aluminum. Tool includes an extra hex bit.

CAD-designed templates to maintain track balance and provide ultimate scratch lines. Marking pattern first eliminates studding errors. Printed on heavy card stock.

White marker used to indicate stud placement. For use with Woody's studding templates to check patterns before drilling holes.

Ensures the track's tension is within the manufacturer's guidelines.

The lake ice stud with the necessary ammunition to compete in slick conditions. Made from through-hardened carbon steel with a 60° carbide insert and 5/16" threads, shortened to increase the length of its narrow, tapered shank. All come with Woody's Short Big Nuts. Competition use only.

High-grade carbon steel hex screws with a carbide insert and extra-coarse threads for strong holding strength and easy removal. Zinc electroplated for an anti-corrosive layer. The carbide tip increases traction on snow, ice, mud, and other slippery surfaces.

Used for simple studding. Hollow drill leaves a clean hole and works with any stud size.

Top-quality Camso track clips that replace OEM track clips and Camso aftermarket tracks. Sold in packs of 10.

Replacement track clips and installation tool for Camso snowmobile tracks.

High-grade, lightweight aluminum support plates for single-ply tracks. Available in round, square, and double styles in a natural finish or 10 powdercoated colors. NOTE: 2.52 pitch single-ply tracks cannot accommodate Round Grand Digger support plates - must use Square or Double Grand Diggers.

The most popular single-ply track stud available for trail riding. Features a through-hardened carbon steel with 60° carbide insert, a 1.2" head with anti-rotation lines, and 5/16" threads. For use in single-ply tracks and Grand Digger support plates.

Through-hardened carbon steel stud with a tip sharpened to match its 60° carbide insert. Features a 1.2" head with anti-rotation lines and 5/16" threads. For use in single-ply tracks and Grand Digger support plates.

The first-ever performance stud for single-ply tracks, built to effortlessly penetrate lake ice. Features a through-hardened carbon steel with a 60° carbide insert, a 1.2" head with anti-rotation lines, and 5/16" threads shortened to increase the length of its narrow shank. For use in single-ply tracks and Grand Digger support plates.

A high-quality and durable track clip tool constructed by KB Tooling. The tool can be used while the track is still on the sled and features a two-piece unit design. The top is made of case-hardened 1018 steel, and the anvil is made of 6061-T6 tempered aluminum. An optional insert (sold separately) makes changing clips on a track with 3" lug...

An ultra-thin, flexible seat heater designed for easy installation under the stock seat cover of motorcycles, ATVs, and UTVs with a battery. The 10" x 9" carbon fiber heater produces 30W and includes a foam cover, quick-disconnect cable, on/off switch, and installation hardware.

Constructed with heavy duty 1,680D ballistic polyester and 600D oxford polyester woven materials. The chassis is built to withstand rugged travel conditions with an upright design for easy access and organization. Features a separate zippered boot pocket, multiple fleece-lined storage compartments, a retractable handle, and heavy-duty wheels. Also...

A partitioned carrier that holds and protects up to four pairs of goggles and lenses. The brushed fleece liner helps protect goggles. Features a carrying handle, a small internal mesh pocket, and an external zippered pocket for spare lenses. Dimensions: 11.5" L x 5.5" W x 9" H.