New Products

Made of Ultra High Molecular Weight (UHMW) poly for unmatched durability. Direct replacements for all previous design C&A handles. Black handles are included with skis; different colored handles available to suit any rider's taste. Race legal, hardware included, and sold in pairs.

Complete mounting kits for C&A Pro skis. Includes: 2 bolts, 2 nuts, 2 rubber dampers, 4 bushings, 4 washers. Sold in pairs.

High-performance aftermarket snowmobile skis designed for various riding conditions, from deep snow to aggressive trail handling. Used in professional snocross and watercross championships. Features preloaded tips to absorb impacts. Sold in pairs. Mounting kits and wearbars/runners are required and sold separately.

Full-coverage 8" handlebar grips that cover both handlebars and hooks for a comfortable, clean-looking, constant-diameter grip surface. Designed to slide over the handlebar and hook after stock grips are removed. Manufactured from a dual-compound rubber for a soft, nonslip surface with excellent grip. The smaller-diameter gripping surface provides...

Molded handlebar hooks made from strong, lightweight nylon. Ultra Hooks improve leverage by widening bar width, and the dropped end increases cornering and general handling. Nylon construction won't rob heat from handwarmers. Easy to install with a Quick-Lock fastening mechanism that lets riders adjust the hook to their preference. Available in...

Extend your stock throttle cable by 10". Features an inline adjuster to fine-tune tension and slack, and universal ends for quick and easy installation.

Designed to fit C&A Pro Skis and significantly improve cornering performance.

Gives the handlebar a cleaner, more streamlined look and allows more room for mounting handguards, mountain bars, GPS, etc. Uses the stock or optional momentary billet kill switch; the stock engine stop switch is relocated to the front of the handlebar to help prevent accidental deployment. Uses the OEM throttle lever pivot pin safety switch,...

Direct OEM replacement for stock cables. A must-have for taller handlebar risers or wider handlebars. Features stainless steel braided top sections for a custom look, rubber seals at critical joints, and is 8" longer than stock.

Kits contain a pair of stub hooks and a pair of 7" grips. Hooks extend the handlebar for a more comfortable feel when leaning off the snowmobile for technical riding. The 7/8" outside dimension of the hook is the same size as the handlebar, allowing extended-length grips to be installed over the top for a seamless feel. Made in the U.S.A.

Extends the handlebar for a more comfortable feel when leaning off of a snowmobile. Easy bolt-on design allows extended-length grips to be installed over the top for a seamless feel. The 7/8" outside diameter is the same size as a handlebar diameter for an even seam. Sold each.

Adds 10" to the throttle cable. A must-have for taller handlebar risers or wider handlebars.

Made from 3/16" thick polyethylene plastic, molded for a perfect fit. Provides custom looks, prevents ice and snow from sticking to skis, extends ski life, and improves performance. Drilled for stock wear bar use. Sold in pairs.

An inexpensive way to keep carbides sharp and protect skis, trailer beds, and garage floors from carbide damage. The design allows the sled to be pulled backward without the boots catching. Universal 6" size fits most skis, even those with ski skins. Easy to install and remove. For trailer and storage use only. Black only; sold in pairs.

Beautifully machined billet aluminum brake levers. Uses OEM mounting hardware. Sold each.

High quality and performance Flat-Top runners available with 4", 6", or 8" of 60° carbide. Runners are 1/2" x 1/2". Made of durable steel with a combination of 60° carbide, hardweld and wear pads. They perfectly fit and guard the ski, offering a cutting edge on hard-packed snow and ice. The Flat-Top design offers increased surface area for less...

Open handguards with universal mounting brackets. Features maximum protection from track/trail debris, dual-injection for increased impact resistance, and are flexible, lightweight, and strong. They offer two horizontal positions, built-in ventilation, and the bracket can be mounted above or below the lever. Universal fitment for all 7/8"...

Designed for strong protection with aluminum brackets and frame. The indexed steel bar-end insert mounts solidly and prevents the guard from rotating in a crash. Comes equipped with a universal X-Strong mount kit.

Water-repellent nylon outer shell with a soft inner lining for warmth and comfort. Rigid plastic inserts provide a wide opening and protection. Designed for easy adjustment and more hand room. Sold in pairs.

Shield your hands from the cold wind while maintaining full visibility of handlebar controls through a clear, cold-resistant plastic window. Removable fleece lining on the interior adds extra warmth. Equipped with a neoprene enclosure that wraps around your jacket or mittens to keep body heat trapped inside. Can be used with mittens or gloves if...

Features an extra large, reinforced opening for easy access and a plush fleece lining to keep hands warm. A simple locking draw cord securely seals to handlebars. The durable Rhino plate front panel provides abrasion resistance. The roomy interior allows complete access to all controls. Dimensions: 16" L x 15" W x 6" H.

Features an integrated thumb switch for easy installation and setting adjustments without removing hands from the handlebar. Plug-and-play wiring connections shorten installation time. Low-battery protection shuts grips off when voltage is low. A five-color LED indicator shows the grip's heat-level setting.

A multi-function thumb switch that replaces your heated grip controller. It offers five different levels of warmth selection and includes a convenient USB port for charging auxiliary devices.

Durable construction with ample heat output and five levels of adjustment. The set includes a connecting wire with a heater switch and handlebar bracket. Sold in pairs.

Durable construction with plenty of heat output and adjustable heat control. Features an LED illuminated heat indicator. Includes connecting wire with heater switch and handlebar bracket. The wiring harness will not interfere with throttle or brake control. Low voltage warning automatically shuts off grips if voltage drops below 12V. Short circuit...