New Products

Replacement heated thumb kit for Koso 5-level heated grips.

Clamp-on grips that require no adhesive. Includes an external temperature controller and interchangeable throttle cams for use with twist throttles. Features low voltage shut-off. Requires 35W and draws 2.5A per pair.

Provides heated grips on demand with no permanent commitment. Easy to install and remove, and compact to stow. The rubber material is resistant to outdoor conditions and high temperatures, and thin, flexible silicone wires make them easy to install. Single heating level requires 10W minimum.

A collection of clamp-on heated grip kits and replacement parts for ATVs and snowmobiles, featuring updated grip designs, thumb warmers, and various zone controllers.

Shape offers good coverage without being bulky. Durable injected-molded polypropylene with a composite front plate for a solid mounting surface. Top and bottom edge rubber overmold lets the shield flex under impact. Drill bit and self-tapping screws included. Sold in pairs. Made in the U.S.A.

Made with soft, flexible and resilient polyethylene. Special mounting brackets clamp around aluminum guards easily and securely without drilling. No-drill design retains the strength of the aluminum handguard. Sold in pairs. Made in the U.S.A.

Effective at keeping hands warm with simple hi/low/off switch operation. Installation is easy. Total 40W; draws less than 3A. Made in the U.S.A.

Heavy-duty 500D nylon with 1/2" closed-cell foam keeps hands warm and dry. Cinch-strap type fasteners seal around the handlebars. Sold in pairs.

Heavy Cordura® outer shell with fleece lining helps keep your hands warm. Designed to allow more room for controls. Installs easily with hook-and-loop type fastener that seals around the handlebars. Measure 13.5" L x 9.5" W. Sold in pairs.

A replacement hi/low/off switch (round rocker) for specific heated grip part numbers.

Composite materials and front support bar provide a blend of rigidity and controlled flex. Mount directly to the handlebars with a three-position-adjustable deflector for perfect placement. Sold in pairs including Contour 2 Deflector. Made in the U.S.A.

The outer shell is made from heavy-duty 500D nylon with 1/2" closed cell foam to keep the cold, wind and trail debris at bay. Universal cinch-strap type mounting provides a universal fit for nearly any machine. Twin grommets on the outside of each guard enable the rider to attach cable ties for a more rigid mount. Sold in pairs.

Features folding shields for unexpected quick departures and is the strongest independent-mount handguard system available. A great alternative to wraparound systems for woods or MX, with billet aluminum mounts and a reinforced backbone on the shield. Includes shields, mounts, and hardware. Made in the U.S.A.

Features a single compound and pattern design. A special U.S.-made compound feels soft but wears like a harder compound. The half-waffle pattern has high-traction chevrons, while wire grooves do not interfere with grip comfort. An extra-thick end cap provides increased strength. Features small flanges for thumb/trigger throttles. Sold in pairs....

The preferred grip design by snow-crossers around the globe. These 8" grips are designed as a one-piece solution for handlebars and hooks. They feature ODI's classic Ruffian diamonized pattern across the entire length for optimal traction. A proprietary material compound offers better shock absorption. Sold in pairs.

Keep your hands warm and dry in all conditions. Keep out wind, rain, and mud. The unique stay-open design makes it easy to grab and see controls. On machines with heated grips, allows the rider to wear thinner gloves for better feel. Sold in pairs.

Engineered and constructed with rigid, yet flexible bone material. Attach easily with hook-and-loop straps for added warmth and protection from roost, water, snow and mud. Feature a stay-open design that allows the rider to easily see controls and ride with thinner gloves for better feel. Sold in pairs.

A series of high-performance handguards designed for the toughest riding conditions, featuring a rigid but flexible backbone that will bend and flex when necessary. Mounts are sold separately. Made in the U.S.A.

Offers enhanced hand protection from the elements. Designed to be used with existing handguard systems or independently.

An accessory for PowerMadd Star Series handguards that adds significantly more wind protection while maintaining the original aesthetics. Creates a larger pocket of protection, which is ideal for late-model sleds with minimal windshields. Made from durable cross-link foam with a Cordura-type skin. Sold in pairs.

Made from an extremely unique, flexible, weather-resistant, and durable material. The handguards' expanded coverage and swept-back design provide extreme weather protection and keep the hand area warm. They will not crush, deform, or warp under any condition, including rollovers. Requires RSI handguard mounting.

One-piece 7" grips featuring an ultra-tacky diamond surface that is soft and comfortable. The durable rubber compound lasts longer, offers increased comfort, and is compatible with hand warmers. These grips fit over RSI aluminum and steel handlebar hooks as well as other handlebars with pre-bent hooks. The thinner rubber design provides a smaller,...

Self-adhesive grip tape that fully wraps handlebars and hooks for a seamless finish. Features high-traction outer synthetic rubber that stays grippy even when wet or cold. Integrated Zorbicon® gel absorbs vibration for a smoother, more comfortable, and secure grip. Measures 46 1/4" long to accommodate all grips with over-the-hook handlebar...

Installs in minutes using a hair dryer. Incredibly tough, will not fall apart during installation of grip. Contains an adhesive, activated during the shrinking process, that ensures no movement after fit to bar. Works on all types of handlebars, including hook style. Works with all aftermarket and OEM grip heaters. Sold in pairs. Made in the U.S.A.

Work with stock OEM connectors. Heat up faster and hotter than stock, making them essential for keeping grips hot when using aluminum handlebars. Features a simple plug-and-play installation requiring no wire cutting and easy installation with 3M™ self-adhesive backing. Available in both standard rectangular and extended hook design shapes. The...