All Products

Required for installation of Revolver Throttle Kit on bikes with ignition and starter switches in stock throttle assembly. Extra-narrow design is only 26 mm wide. Features a Push In/Out engine switch and momentary 2-pole starter switch with two separate circuits. Includes wiring harness. Made in Italy by Domino.

Quality 6061-T6 forged aluminum levers with a roller bearing in the clutch pivot for effortless operation. Designed to fit OE perch.

Y and T fittings in sizes from 3/16" to 1/4". O-clips in sizes from 5/16" to 7/16". Acetal fittings are strong and light. Ideal for the shop or home mechanic. Made in the U.S.A.

Safe for use with fuel-injected bikes. When connected, fuel will flow and when disconnected, fuel will not flow. Use dual shut-off for fuel tanks equipped with a crossover line. Capable of withstanding temperatures from -40° F (-40° C) to 250° F (121° C). These quick-disconnect fittings utilize Viton®-type fluoroelastomer O-rings which...

Easy to apply and easy to remove from throttle tube and bars when changing grips. Exceptional bonding to metal, plastic composites, rubber, leather, vinyl, glass and wood. 20 g (0.71 oz.) tube is enough for multiple applications.

Model-specific handlebar switch for use with Rev2 throttle kit on bikes with ignition and starter switches in stock throttle assembly. Extra-narrow design is only 26 mm wide. Features a push in/out engine switch and momentary 2-pole starter switch. Model-specific design with prewired connector plugs into stock wire harness. Made in Italy by Domino.

Made of corrosion-resistant stainless steel. Conventional style worm drive hose clamps. 7/16" hex head with screwdriver slot. Sold in packs of 10.

Ideal for use on vehicles where an in-line fuel petcock is necessary. Feature double neoprene seals and O-rings. Smooth and positive operation. Note: Part #877249 is not recommended for engines over 200cc. Parts P12-035 and P12-036 are not recommended for engines over 300cc.

License plate frame that lets others know you 'Race With The Pros'. Fits most 4" x 7" license plates.

Certified to meet permeation emission standards of 15g/M2/day. On emission-controlled vehicles, check with dealer for state and local law before use. Robust multi-layer design and construction. Showcases little to no fuel vapor loss. Highly resistant to ethanol-blended gasolines up to 100%. Highly flexible, easy to install and offers excellent...

Grade 5 hardware with zinc finish. Sold in an adjustable-selection box measuring 13 1/2" L x 9 1/4" W. Kit includes 10 of each size as listed.

OEM-style replacement clutch and brake levers for a wide range of Suzuki and Yamaha motorcycle models. Available in Polished and Black finishes.

Stronger and more durable than vinyl fuel line. Use with any type of gasoline. Resists swelling and hardening. Resistant to direct sunlight, hardening and/or cracking. Flexible in temperatures from -37.9 C to 73.9 C (-35 to 165 F). Can be used with in-line fuel filters or petcocks. Sold in 3' lengths and 25' rolls. Made in the U.S.A. NOTE: Not for...

Updated design of the Motion Pro Push-Pull throttle with a die-cast aluminum housing and smooth painted black finish. Features stainless steel hardware. Perfect for smooth-bore conversions on street and race bikes. Includes nylon throttle tube with grip retaining ring and pop out end cap.

Constructed of fuel-flexible plasticized PVC tubing. Safe for use with any type of gasoline or alcohol-type fuel. Smooth, slick tube helps prevent interior buildup. Recommended for venting and overflow lines. Flexible down to -17 C (0 F). Maximum dry heat temp is 104 C (220 F). Sold in 3' lengths and 25' rolls. Made in the U.S.A. NOTE: Not for use...

Replacement Push/Pull Throttle Cables for REV2 Throttle and Kits. Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight. Upper section of cables use 6 mm housing to provide solid support of adjusters.

The 3rd generation Motion Pro Revolver variable rate throttle system. Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions. 5 different reels provide perfect throttle response for any condition. Slim REV3 throttle housing allows more room for lever clearance and adjustment. Improved throttle...

Ergonomically designed grips with a medium-density TPR compound for excellent feedback and control. Features a full diamond pattern for unparalleled feel in wet and dry conditions. The inner diameter is optimized to keep grips secure. Sold in pairs.

Replaces most speedometer cable inner wire (0.125"). Includes tips and tools to finish the cable. Available in 50" or 92" lengths.

Kit includes six sprocket bolts (8 mm), six Fuji metal-locking nuts (8 mm) and six flat washers (8 mm). Pre-applied thread locking agent on sprocket bolts and factory-style Fuji lock nuts create a double-locking design that keeps the hardware tight and secure. Metric class (grade) 10.9 for outstanding wear and durability. Durable zinc-plated...

Plugs into stock wiring harness.

Convenient kit includes 80 pieces of hardware, a Motion Pro Side Jaw Pincer tool (P/N 08-0584) and five clamp sizes. Narrow 5 mm wide band provides concentrated seal compression. 360° Stepless® design with no gaps on inner surface. Specially formed strip edges reduce the risk of damage to the part being clamped. Lightweight design. Tampering is...

Provides straight-through fuel flow. Available for 1/4" and 5/16" ID fuel line. Can handle service temperatures of -40° C to 82° C (-40° F to 180° F). Viton®-type fluoroelastomer O-rings provide superior chemical resistance. Made in the U.S.A. NOTE: Not for use with fuel injected engines.

Heavier duty replacement for OEM throttle sleeves. Made from nylon fabric composite material, they will not scar bars like aluminum sleeves. Features a one-piece tube and reel design. Available in fixed-end, open-end and pop-out end styles.

Tougher and more resilient than aluminum tubes. Will not deform, seize, bend or break upon hard impact. Proprietary low-friction material provides smooth operation and eliminates galling and vibration.