All Products

Replaces the stock suspension arms. Gives your bike the low look without losing suspension travel. Lowered distance of 1 1/2". Kit includes everything needed for a complete installation. Made in the U.S.A. Replaces the stock suspension arms. Gives your bike the low look without losing suspension travel. Lowered distance of 1 1/2". Kit includes...

Compatible with current air cleaners using the new-style low-profile black air filter element. Made in the U.S.A.

Cone kit replaces the bottom cup washers and hides the head of the screw and lock washer. Includes 1/2"-13 x 3" bolts. Gloss black finish. Made in the U.S.A.

A simple solution to adding a little rise and pullback to your handlebars and/or risers. Available in chrome, gloss black or flat black finish. Made in the U.S.A.

CNC machined from billet aluminum with a bright chrome or gloss black powdercoat finish. Drilled and tapped for 1/2"-13 mounting bolts. Riser caps feature a hidden hardware design for a unique, clean style. Metric adapters included. Sold in pairs. Made in the U.S.A.

Extends the stock shift peg out an additional 1.5”. Extension is ribbed to match the OEM look. Pre-installed mounting screw. Sold each. Made in the U.S.A.

Fit handlebars with 1" clamping area. CNC-machined from billet aluminum. Risers are drilled and tapped for 1/2"-13 mounting bolts (sold separately).

Rigid mount your handlebars with these precision CNC-machined bushings. Sold in pairs. Made in the U.S.A.

Solid steel construction for rugged looks and years of performance. Welds or bolts to the frame and seat pan. Stout 2" springs prevent bottoming and provide a smoother ride. Made in the U.S.A.

Kit includes two rigid-mount risers with top clamps and all necessary mounting hardware. Top cap hardware is hidden for a smooth, clean look. Risers measure approximately 1 1/2" tall. Made in the U.S.A.

Heavy-duty smooth billet columns of refined style and support for your handlebars. Perfect for any 1" bars. Supplied as a set with caps and stainless cap mounting hardware.

Add a visual kick to your air cleaner or custom location of your choice. Aluminum base construction with stainless steel bottle opener. Base is ball-furnished finish, bottle opener is polished finish. Installs using original air cleaner center mount bolt; mounting hardware for bottle opener included. Mounts in just minutes, adding both...

Bolts directly to triple tree, bringing handlebar mounts 1.5" closer to the rider. Comes with built-in solid risers. Raises bars a total of 2". Works with any T-bar or riser setup. Made in the U.S.A.

Billet aluminum construction available for various T-bar diameters. Accepts stock gauge module. Perfect for Kage Fighter-T's.

Relocate the stock gauge and bracket to the upper portion of the T-bar risers. Billet aluminum construction. Accept gauge brackets that attach to the handlebar clamp. 4 3/16" on-center mount holes. Made in the U.S.A.

Includes all required wires to extend both the Throttle-By-Wire harness as well as the heated grip harnesses. Will work with up to 20" bars. Note: 11-15 CVO Softail models do not come with heated grips from the factory; this kit may be used as a TBW extension only on those models.

Wiring extension kit for electronic throttle control. Features OEM-match color-coded wires with factory connectors. Works for most handlebar heights (up to 20"). Made in the U.S.A.

Custom upper triple tree allowing installation of bushings and risers to expand handlebar options. Works with OEM turn signals. Gloss black powdercoat finish.

Designed to pair perfectly with Twin Peaks handlebars. Direct bolt-on, 1 1/4" dia. Three-piece design is quick and easy to install and adjust to fit. Mitered corners flow perfectly with Twin Peaks handlebars. Available in black. Made in the U.S.A.

Machined out of solid billet aluminum. Bolts directly to triple tree, allows for the installation of taller risers in addition to T-bars. Adapter moves the handlebar 2.5" towards the rider and raises the handlebar up 1". No modifications to the screen are necessary. Made in the U.S.A.

Ideal for replacing rusted-out exhaust baffles or for custom fabrication. Baffles made of 16 or 22-gauge stainless steel with 1/8" diameter holes, 3/16" staggered centers. Made in the U.S.A.

Easy weld-on cap for either gas or oil tanks. Bung is aluminum. Vented gas cap is aluminum with knurled edge. Bung measures 1 5/8" in diameter and 1" tall (3/4" insertable for welding). Cap is 1 5/8" in diameter and 1/4" tall. Made in the U.S.A. Easy weld-on cap for either gas or oil tanks. Bung is aluminum. Vented gas cap is aluminum with knurled...

Laser-cut 1/4" steel tabs are a great way to mount a custom gas or oil tank. Kit includes two steel tabs and four rubber grommets. Each tab measures 5.9" L x 1.18" W; two 0.83" holes are spaced 4.58" center-to-center. Made in the U.S.A.

Sized for modern smartphones and GPS units. Strong magnets secure the weather-resistant pouch to a metal fuel tank. Each magnet is shielded to prevent interference with the device's electronics. The large plastic window transfers electrostatic energy, allowing for touchscreen operation. An audio plug access port can be accessed through an...

Made from high-quality automotive-grade vinyl (unless noted). The driver area is cut narrow in the front and is approximately 1" lower than the stock seat. Molded polyurethane foam for maximum comfort and styling. 3/16" ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint. Accepts backrest...