All Products

High-quality tie-downs that last. Two oversized, high-strength rubber-coated hooks. 6' long straps are printed with Moose Utility Division logo. Standard and ratchet styles sold in pairs. Made in the U.S.A.

Prevents loss of coolant due to overheating. Works on most water-cooled motorcycles, snowmobiles and ATVs. Designed for hot weather and/or high-altitude riding conditions. Features a compact, versatile, high-density polyethylene bottle with built-in mounting holes for multiple options. The bottle cap is constructed from chemical-resistant rubber...

Prevents loss of coolant due to overheating, ideal for most water-cooled motorcycles, snowmobiles, and ATVs. Specially designed for hot weather and/or high-altitude riding conditions. Features a compact, versatile, high-density polyethylene bottle with a chemical-resistant rubber cap. The kit includes the 275cc bottle, hose, clamps, mounting ties,...

Cables feature gloss black fittings and black vinyl housings. Available in undersize, standard, and oversize lengths. Heavy-duty LW clutch cables feature a longitudinal weave housing for superior compression resistance, smoother operation, and lighter pull. Note: Length given is the length of the outer housing only, excluding the elbow.

Nylon-reinforced vinyl fuel line. Braided nylon within the tubing wall provides added strength and flexibility against kinking. Won't harm fuel lines. Flexible down to -25 F/-3.8 C. Maximum dry heat is 150 F/65 C. Sold in 3' lengths and 25' rolls. Made in the U.S.A. NOTE: Not for use with fuel-injected engines.

Cable fittings for repairing or custom fabrication. Shop kit contains 195 of the most commonly used fittings, complete with storage box. Cable fittings for repairing or custom fabrication. Shop kit contains 195 of the most commonly used fittings, complete with storage box.

Exclusive formula developed for Motion Pro to provide the smoothest operation and longest cable life. Ideal for use with Motion Pro cable luber. Special blend of Redline® synthetic lubricants and rust inhibitors keeps your cables working smoothly in any weather condition from hot to cold, wet or dry.

For aftermarket and OEM spec applications. Cap for Mikuni VM26-34 mm carbs.

Replacement chain tensioner hardware for most stock applications of street and off-road motorcycles. Metric class (grade) 8.8 for outstanding wear and durability with a durable zinc-plated finish. Kit contains two M8 x 50 bolts with 10 mm hex heads and two M8 flange nuts with 12 mm hex heads. Replacement chain tensioner hardware for most stock...

Meets or exceeds OEM quality. Inner nylon sleeve for longer life and smooth operation. Replaces dash-mounted choke assemblies with 3/16" shank and 10 x 32 thread. Replacement inner wire available separately.

A hardware set to add chrome accents to the back end. Includes four each: bolts, washers and lock nuts plus an Allen wrench. A hardware set to add chrome accents to the back end. Includes four each: bolts, washers and lock nuts plus an Allen wrench.

Everything you need to replace a broken inner cable on your mechanical clutch. Long enough to repair most Harley-Davidson clutch cables. Includes one pre-lubed 100" inner cable, two clutch slugs, two clutch pins and one pin holder. A must-have item for your tool pouch or saddlebags for those long road trips. Made in the U.S.A. Note: This kit is a...

85-piece Stepless® clamp kit with an assortment of commonly used clamp sizes for cooling systems. Stepless clamps provide secure 360° clamping with no gaps. Specially formed edges reduce risk of damage to hose and hose barb. Narrow 9 mm band provides concentrated seal compression. Tampering is visible. Comes in a durable partitioned plastic box...

Required for installation of Revolver Throttle Kit on bikes with ignition and starter switches in stock throttle assembly. Extra-narrow design is only 26 mm wide. Features a Push In/Out engine switch and momentary 2-pole starter switch with two separate circuits. Includes wiring harness. Made in Italy by Domino. Required for installation of...

Quality 6061-T6 forged aluminum levers with a roller bearing in the clutch pivot for effortless operation. Designed to fit OE perch.

Y and T fittings in sizes from 3/16" to 1/4". O-clips in sizes from 5/16" to 7/16". Acetal fittings are strong and light. Ideal for the shop or home mechanic. Made in the U.S.A.

Safe for use with fuel-injected bikes. When connected, fuel will flow and when disconnected, fuel will not flow. Use dual shut-off for fuel tanks equipped with a crossover line. Capable of withstanding temperatures from -40° F (-40° C) to 250° F (121° C). These quick-disconnect fittings utilize Viton®-type fluoroelastomer O-rings which...

Nylon-reinforced vinyl fuel line. Braided nylon within the tubing wall provides added strength and flexibility against kinking. Won't harm fuel lines. Flexible down to -25 F/-3.8 C. Maximum dry heat is 150 F/65 C. Sold in 3' lengths and 25' rolls. Made in the U.S.A. NOTE: Not for use with fuel-injected engines. Features 1/4" NPT pipe thread on one...

Easy to apply and easy to remove from throttle tube and bars when changing grips. Exceptional bonding to metal, plastic composites, rubber, leather, vinyl, glass and wood. 20 g (0.71 oz.) tube is enough for multiple applications.

Model-specific handlebar switch for use with Rev2 throttle kit on bikes with ignition and starter switches in stock throttle assembly. Extra-narrow design is only 26 mm wide. Features a push in/out engine switch and momentary 2-pole starter switch. Model-specific design with prewired connector plugs into stock wire harness. Made in Italy by Domino.

For use with auxiliary fuel tank or other use requiring an in-line installation. Features double neoprene seals and O-rings for smooth and positive operation. PART #P537 is not recommended for engines over 200cc. PART #s P12-035 and P12-036 are not recommended for engines over 300cc.

License plate frame that lets others know you 'Race With The Pros'. Fits most 4" x 7" license plates. License plate frame that lets others know you 'Race With The Pros'. Fits most 4" x 7" license plates.

Longitudinally wound black housing resists compression under heavy loads to deliver a precise, positive, non-mushy feel for enhanced performance. Features a PE liner for durability and smoothness. Smooth and precise clutch operation. Sold each.

Certified to meet permeation emission standards of 15g/M2/day. On emission-controlled vehicles, check with dealer for state and local law before use. Robust multi-layer design and construction. Showcases little to no fuel vapor loss. Highly resistant to ethanol-blended gasolines up to 100%. Highly flexible, easy to install and offers excellent...

Certified to meet permeation emission standards of 15g/M2/day. Robust multi-layer design with a fluoropolymer liner compatible with up to 100% ethanol-blend gasoline. Highly flexible, easy to install, and resistant to swelling, hardening, and cracking. Ozone- and UV light-resistant. Wide temperature range from -28.9 to 73.9 °C (20 to 165 °F)....