All Products

Seat design lets you ride low and still be comfortable. Cut narrow at nose for better ground reach. Fully adjustable driver backrest is easily removable without tools.

Seat design allows riding low while remaining comfortable. Features detailed stitch work in a highly durable, synthetic glove-leather cover and a marine-grade fiberglass baseplate. 13" width. Made in the U.S.A.

High-quality expanded vinyl cover with detailed diamond-stitch pattern. Backrest is fully adjustable, easily removed and built directly into the seat. Includes chrome hardware and mini fender bib. Note: Will not fit with stock passenger seat or handrail.

Heavily walled and adhesive-lined heat shrink tubing to keep splices dry. Works well for battery lugs or aftermarket ignition switch terminals. Comes in 4' lengths and is sold in a 4-pack. Made in the U.S.A.

AMP 040 male and female connectors. Made in the U.S.A.

Top-quality OEM-style replacement connectors and terminals. Easy to use. Sold each, unless noted. Made in the U.S.A.

A CAN bus controller for changing handlebars and switches on 11-16 models. Plugs into the factory harness under the fuel tank and wires up any pre-CAN bus handlebar switch assemblies.

Designed for use with braided copper and stainless steel hoses, and fit over most manufacturer's braided rubber hoses. Extruded from brass and finished with chrome. Sold in packs of six. Made in the U.S.A.

Direct replacement for OEM circuit board #68830-99A.

Available in 10-, 15-, 20- or 30-amp ratings. Sold each.

The perfect start for any project bike or OEM model re-wire. Complete bike harness with starter relay, 3-circuits, self-canceling and run, brake and turn signal module. Works with any standalone, Evo or Twin Cam ignition system. Designed to operate with a two-position key switch.

Delphi connectors with 18” wire pigtails. Wiring matches Harley-Davidson OEM colors for easy installation. Made in the U.S.A.

A marine-grade, key start ignition switch for custom applications. Features a stainless steel knurled jam nut with a polished finish and includes two keys and brass screws. A marine-grade, key start ignition switch for custom applications. Features a stainless steel knurled jam nut with a polished finish and includes two keys and brass screws.

Stubby antenna available in rubber or aluminum with carbon fiber insert. Fits any H-D models with existing audio antenna. Direct plug-in installation.

1/4" female quick-disconnect matches OEM that is used on rear brake switches and horns. Sold in 10-packs. 1/4" female quick-disconnect matches OEM that is used on rear brake switches and horns. Sold in 10-packs.

Kit includes 1-position plug, receptacle and one male and one female crimp terminal. Used to replace the male and female connectors that are found on the regulator. Designed to save time and labor.

Durable extruded PVC plastic tubing. Non-heat shrinkable with a satin finish. Comes in 8' lengths.

An inexpensive way to connect wiring. Fully insulated PVC construction. Available for 18 to 22 gauge or 14 to 16 gauge wiring. Sold in 25-packs.

Disables the neutral indicator light. Made from highly polished, stainless steel with a 1/4" blind hex head tightened from inside the trans top cover. Made in the U.S.A.

Perfect for shops and do-it-yourselfers. 100' of 18-gauge wire on 6" spool. Available in OEM Harley-Davidson color codes. Made in the U.S.A.

Plugs into on-board diagnostic port. 100% plug-n-play. Acts like a cigarette lighter port in your automobile; works great for powering and charging accessories while riding. Made in the U.S.A.

Replaces OEM parts. Made in the U.S.A.

An inexpensive way to connect wiring. Fully insulated PVC construction. Sold in 25-packs. An inexpensive way to connect wiring. Fully insulated PVC construction. Sold in 25-packs.

30-amp starter relay easily handles high-current draw. Made in the U.S.A.

Kit includes AMP and Delphi connectors with terminal ends and wire seals. Available in packs of five. Made in the U.S.A.