All Products

The most advanced grip available, featuring aramid fibers in a soft compound. Lasts three times longer than regular soft grips. Available in standard full-diamond pattern. Sold in pairs.

Feature synthetic rubber compounds specially formulated to achieve the optimum combination of strength, tackiness and shock absorption. Available in multiple firmness levels. Sold in pairs.

Renthal performance rear and front street sprockets for various Yamaha motorcycles, available in different sizes and finishes.

Replacement baffle (each).

Weld-in style bungs used for custom-mounting filler hole in fuel tanks. Accepts 84-E96 screw-in gas caps. Sold each.

Replaces commonly worn or lost pivot bolts for brake or clutch levers. Includes correctly sized nut. All measurements in millimeters. Sold in 10 pk unless noted.

Low-cost alternative replacement plastic to replace worn or damaged Memphis Shades. Made of Lucite for excellent optics and durability. Does not include hardware. Sportshield replacement plastic has same part numbers as found on other pages.

Resettable hour/tach meter with service modes.

For use with almost any 7-pin trailer wiring on a vehicle. Seamlessly integrates reverse lights without needing to splice into factory wiring. Plug-n-play install. Comes with a weatherproof DT connector. Works with all Speed Demon lights using a DT end. Works on cars with AMP connectors. Splitter addition (sold separately) will allow a two-light...

Eliminates the risk of the inside bolt on the anti-rotation device breaking off in the case. Fits over broken bolts – no extraction required. Billet aluminum lifter guides add stability. Lifter covers are made of die-cast aluminum.

Replacement brushes for most field-excited 3-phase alternators. Sold in pairs. Replacement brushes for most field-excited 3-phase alternators. Sold in pairs.

Quality replacement CDI box for Honda models. Quality replacement CDI box for Honda models.

A universal connector kit that includes 2-place, 3-place, 4-place and 6-place male and female crimp style connectors. Works with 14 to 20 gauge wire. A universal connector kit that includes 2-place, 3-place, 4-place and 6-place male and female crimp style connectors. Works with 14 to 20 gauge wire.

Features Rick's original redesign: a single-phase, full-wave system. Includes a modern solid-state rectifier/regulator and a stator. Puts out 25% more power than the stock system and will support a 55W headlight. Also supplies constant power to the bike's battery. Unlike the stock setup, the bike will charge with or without the headlights being on...

Heavy-duty, high-capacity alternator. Generates 59A at 2000 rpm (19A over stock); generates 80A at 3000 rpm (double stock). Ideal for running extra lighting and other electrical accessories. Heavy-duty, high-capacity alternator. Generates 59A at 2000 rpm (19A over stock); generates 80A at 3000 rpm (double stock). Ideal for running extra lighting...

High-quality replacement OEM alternator rotor for Honda models. High-quality replacement OEM alternator rotor for Honda models.

High-quality OEM replacements. Constructed from high-quality components for superior performance and long life.

Designed with the correct voltage set point of 14V +/- 0.2 for use with Lithium-Ion batteries. Not for use with standard lead acid batteries. Ballistic Performance Batteries are recommended.

Rick's Motorsport original design. Includes both a stator and a lithium-ion friendly rectifier-regulator. Will put out approximately 150W and power a 55W headlight if the bike's rotor has not been compromised. Supplies constant power to the bike's battery. NOTE: This kit is not for use with standard lead acid batteries. The voltage point is set to...

OEM-style alternator assembly. Sold each. OEM-style alternator assembly. Sold each.

When the rectifier/regulator burns out, it's no longer necessary to buy the entire wiring harness. Upgraded plastic body and 350-series terminals. Includes three separate pairs of connectors to replace the OEM connector on the rec/reg and its mate. Increases current carrying capacity by over 50%; helps eliminate corrosion and heat issues.

When the regulator/rectifier burns out, it's no longer necessary to buy the entire wiring harness. Kit consists of one plastic plug body and five high-quality brass connectors (opposite end connector to regulator/rectifier). When the regulator/rectifier burns out, it's no longer necessary to buy the entire wiring harness. Kit consists of one...

High-quality universal-style brush plate repair kits.

New starter motors that bolt on as direct replacements for OEM.

High-quality components meet or exceed OEM specs.