All Products

Strong, laser-cut steel construction mounts that allow an 8" range of motion for the driver's feet. Easily bolts to factory floorboards and is customizable with any Rivco peg set (sold separately). Strong, laser-cut steel construction mounts that allow an 8" range of motion for the driver's feet. Easily bolts to factory floorboards and is...

CNC-machined billet aluminum pegs and mounts that clamp to 1 1/4" or 1 1/2" frame down tubes. Allows for an 8" range of motion (4" forward or 4" backwards) to fit any leg length. Anti-vibration pegs feature a unique locking setscrew system that lets the rider set the peg angle. Sold in pairs.

Highway pegs with mounting arms that fit 1 1/4" diameter highway bars. Includes tools required for installation. Sold in pairs.

2000 lumens. Available in 6000K bright white or amber for dusty and foggy conditions. Sold each.

6000K daylight-white light beams with no yellow or blue tint. 12000 lumen total output (6000 per bulb). Rated for 30,000 hour service life. Sold in pairs. 6000K daylight-white light beams with no yellow or blue tint. 12000 lumen total output (6000 per bulb). Rated for 30,000 hour service life. Sold in pairs.

2800 lumen output per bulb. Light field is 15% wider and 30% longer than factory bulbs. Daylight white 6000K. RFI shielded. Easy plug-and-play installation. NOTE: Not DOT compliant. 2800 lumen output per bulb. Light field is 15% wider and 30% longer than factory bulbs. Daylight white 6000K. RFI shielded. Easy plug-and-play installation. NOTE: Not...

4500 lumen low beam, 7200 lumen high beam. 6500K color temperature. Black bezel.

A high-quality double flag holder and poles made from hand-polished stainless steel that will never rust or tarnish. It mounts easily to all license plate holders and remains sturdy at highway speeds. Made in the U.S.A. A high-quality double flag holder and poles made from hand-polished stainless steel that will never rust or tarnish. It mounts...

With an output of 118 decibels, these electric horns are among the loudest on the market. Easy bolt-on replacement and electrical hookup for most bikes. Set includes two horns (one high and one low tone), mounting brackets and installation instructions. Horns measure 3" x 3" x 3" each.

Economical alternative to factory Harley-Davidson pegs. Reversible rubber on one side with rubber inlays on the other. Measure 4" x 4".

Chrome finish backrest and rack system. Includes luggage rack (12" wide x 11" long), passenger backrest and pad (12" wide x 8" tall), and mounting hardware. Mounts to standard H-D docking kit.

Made from strong, lightweight aircraft-quality aluminum. For use with Quick-detach rack PART #3930-0015.

A strong, steel rack mounting kit with a black powdercoat finish. Features a quick-detach design for easy removal. A strong, steel rack mounting kit with a black powdercoat finish. Features a quick-detach design for easy removal.

Triple-chrome-plated steel bumper. Bolt-on design. Works with optional flag holder socket (PART #0521-1172) and optional flag mounting bumper plates (PART #0521-1171).

Slides over stock kickstand foot to double the surface area of the foot; no more hauling around a kickstand plate. CNC-machined billet aluminum construction with black-anodized finish. Secures with setscrew. NOTE: Not for use with driver floorboards.

Allows more visibility when braking by flashing the brake lights. Sold each.

Telescoping flagpole extends from 18" to 6' tall in seconds with positive twist-locks. Made from lightweight and strong aircraft aluminum tubing. Optional triple-chrome-plated add-on flag holder socket available.

Made from solid 1/2" bar stock and welded on both the front and back side of the steel base plate. Bolts in three places using existing holes. May not work with some bumpers. Made from solid 1/2" bar stock and welded on both the front and back side of the steel base plate. Bolts in three places using existing holes. May not work with some bumpers.

Steel construction and chrome-plated. Includes tow ball and mounting hardware. Quick installation.

Super-strong receiver-type hitch fabricated from laser-cut steel. Bolts directly to the frame in minutes. Triple-chrome-plated tongue is 1 7/8" wide; the receiver is 1 1/4". Receiver is almost completely hidden. Tongue height is 11". Made in the U.S.A.

Trailer wiring sub-harness plugs into the bike's stock wiring harness on one end and Rivco's own 5- to 4-wire converter or isolator on the other. Eliminates the need to cut and splice the stock wiring harness. Order the sub-harness for your bike based on your bike's plug-in type.

A trunk-mounted double flag holder kit made from hand-polished stainless steel. It is designed to use existing trunk holes on the Can-Am Spyder F3 and doesn't interfere with trunk opening or brake lights. Made in the U.S.A. A trunk-mounted double flag holder kit made from hand-polished stainless steel. It is designed to use existing trunk holes on...

Pegs with anti-vibration rubber inlays. Stainless steel 3/8" bolts will fit most arms and clamps. Accent pegs only, do not feature folding clevis mounts. Sold in pairs.

Advanced design XW-ring provides better sealing to extend wear life up to 100%. High-speed, extreme heat performance chains that can handle large cc motors. EXW chains include clip connecting link.

520XRU was designed for professional MotoGP racing. Featuring UW-Ring seals, XRU is a lightweight professional racing chain. UW seals reduce friction while maintaining optimal horsepower delivery from the start of the race to the end. Tensile strength of 9,000 lbs. Max of 1,000cc. MAX Horsepower: 265 HP. Road racing Use ONLY! Not to be used for...