All Products

Moves handlebars 1 1/2" up and 1" back or forward from the OEM position. Designed to work on any bike with a stock 1 1/8" Fatbar, parallel OEM bar clamps and open mounting area. Machined from 6061-T6 aircraft-grade billet aluminum. Includes mounting hardware, instructions, and step shims. Made in the U.S.A.

Provides 1 1/2" of total pullback, moving the bar approximately 1 1/4" up and 3/4" back from the OEM position. Clear anodized finish. Includes mounting hardware and works with stock cables. Made in the U.S.A. Provides 1 1/2" of total pullback, moving the bar approximately 1 1/4" up and 3/4" back from the OEM position. Clear anodized finish....

1 3/4" center-to-center rise with 26 mm stem. Pivot forward or backward depending on rider preference. Black anodized finish. 1 3/4" center-to-center rise with 26 mm stem. Pivot forward or backward depending on rider preference. Black anodized finish.

Sleek, stylish design risers that fit most applications with 7/8" handlebars and a 7/8" bar clamp. Machined from billet 6061-T6 aluminum with an anodized clear finish. Made in the U.S.A. Sleek, stylish design risers that fit most applications with 7/8" handlebars and a 7/8" bar clamp. Machined from billet 6061-T6 aluminum with an anodized clear...

2" rise risers that fit many makes/models of cruiser bikes with a 1" diameter bar and an open mounting area. Machined from 6061-T6 aluminum. Risers do not work on Yamaha V-Star 1300. Made in the U.S.A.

Reduces bar vibration and hand tingling/numbness. Risers pivot Forward/Backward. 2" of rise, 1 1/4" stem, accepts 1 1/4" handlebar. Designed to use the stock BMW caps/bolts on the top of the risers. Work with stock cables. Made in the U.S.A. Reduces bar vibration and hand tingling/numbness. Risers pivot Forward/Backward. 2" of rise, 1 1/4" stem,...

Pivoting riser kits that can be positioned forward, backward or anywhere in between. Bottom fits 1" handlebar clamps; 1" bar clamp on the top side. Constructed from aircraft-grade aluminum (6061-T6). Made in the U.S.A.

Very easy installation with a lifetime warranty. Provides 1 1/2" rise and moves the handlebar 1.5" up and 1.2" back. Works with OEM cables and lines. Black anodized finish. Made in the U.S.A. Very easy installation with a lifetime warranty. Provides 1 1/2" rise and moves the handlebar 1.5" up and 1.2" back. Works with OEM cables and lines. Black...

Designed specifically for the Harley-Davidson Pan America. 1 9/16" of diagonal rise; moves the bar approx 1 3/8" up and approx 3/4" back from the stock position. Machined from 6061-T6 aircraft grade billet aluminum. Engraved Rox logo. Matte black anodized finish.

Bring the stock handlebar location back toward the rider by approximately 2". Great option for riders who want to get more upright in the seat. Riser clamping positioning will be limited by the large OEM fairing assembly. Riser clamping portion is 1 1/4" in diameter. Accept handlebars with 1 1/4" clamping area. Polished silver finish.

2" rise with 1 1/4" stem. Accepts 1 1/4" handlebars and pivots forward or backward depending on rider preference. Works with stock cables. Comes with low-profile caps to replace the OEM bar clamp caps. Features clear anodized finish. Made in the U.S.A. 2" rise with 1 1/4" stem. Accepts 1 1/4" handlebars and pivots forward or backward depending on...

Designed to fit C&A Pro Skis and significantly improve cornering performance.

Aggressive running board tread designed to fit places where standard grip strips may not. Edge grippers can be nested together to create one long continuous strip. Sold in packs of 6.

2" center-to-center rise with 1 1/8" stem. Pivots backward/forward based on rider preference and accepts 1 1/8" handlebars. Extended stem on the bottom portion of the riser makes for a great fit for bikes with angled handlebar clamps.

A series of high-performance handguards designed for the toughest riding conditions, featuring a rigid but flexible backbone that will bend and flex when necessary. Mounts are sold separately. Made in the U.S.A.

A quick-change design mountain strap that allows you to lower the handle when not in use, ideal for cross-over sleds. Adds another grab point for side-hilling and features a rubber overmolded handle with embossed grip. Silicone rubber stays flexible to -40 °C. Made in the U.S.A.

Offers enhanced hand protection from the elements. Designed to be used with existing handguard systems or independently.

Features PVC Rox logos on top and front. Mounts to any motorcycle, dirt bike, ATV or snowmobile with an open bar clamping area.

Universal grip strips that provide aggressive traction and a more level-feeling platform on virtually any running board with a large, flat surface. Made in the U.S.A.

An accessory for PowerMadd Star Series handguards that adds significantly more wind protection while maintaining the original aesthetics. Creates a larger pocket of protection, which is ideal for late-model sleds with minimal windshields. Made from durable cross-link foam with a Cordura-type skin. Sold in pairs.

A selection of high-quality handlebar risers from Rox Speed FX, including anti-vibration, height-adjustable, and pivoting models. Engineered from CNC-machined 6061-T6 aluminum to allow riders to customize their handlebar position for improved comfort and control. Made in the U.S.A.

Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position. Engineered and tested for maximum strength and durability. CNC machined from billet 6061-T6 aluminum, then anodized for long-lasting good looks. Made in the U.S.A. Note: Longer cables may be required when installing handlebar risers on some models.

Unique design allows for installation in either direction. 1" offset means bar can be moved closer or further away. Reducers lock into risers to ensure no slippage between components. Risers have an oblong hole so that they will fit virtually any fore and aft bolt center-to-center distance with 8 mm bolt threads. Made in the U.S.A.

Durable black plastic, ISOC-approved, and race legal number plates for snowcross racing. Available for front and rear applications. Rear plates include rivets.

Made from an extremely unique, flexible, weather-resistant, and durable material. The handguards' expanded coverage and swept-back design provide extreme weather protection and keep the hand area warm. They will not crush, deform, or warp under any condition, including rollovers. Requires RSI handguard mounting.