All Products

Tungsten pin kit. Allows for easy clutch tuning. Add or subtract less than a gram of weight at a time. Range: 13 - 23.1.

Make clutch tuning easy by being able to adjust within less than a gram. Fully threaded for complete use of pin.

Fully adjustable clutch weights allow modifying of clutch to match riding style and conditions. Uses your stock P-drive clicker. Adjustable from 48 g to 81 g. Kit includes: adjustable weights (48 g), magnets (1.3 g), short pivot bolt (12.8 g), long pivot bolt (15.4 g), pivot bolt washers (1.1 g), long tuning screws (1.8g), short tuning screws...

One-piece aluminum skid plates that offer additional flotation, protection, and reduced drag in deep snow. Designed with crumple zones to protect the sled's upper structure and are completely rebuildable after impact. Available in multiple colors for a custom look on late-model machines.

Beautifully machined billet aluminum brake levers. Uses OEM mounting hardware. Sold each.

Lightweight, fully polished aluminum braces that reduce heat buildup in belts, clutches, and chassis while increasing horsepower. Easily installs within 10 minutes with no drilling, cutting, or modifying required.

Kits are designed to give excellent holeshot, improved mid-range and best possible mph available. They will not reduce clutch or engine life.

Easy-to-install and zinc-coated for weather protection. Allows the use of most Polaris, Arctic Cat and Comet weights to be used on Yamaha models.

The EZC Dash Mount takes the stock vertical instrument cluster and presents it to the rider at a 45° angle, improving visibility of valuable performance information and warning lights. Molded from high-quality durable materials with a clean OEM design, it's perfect for mountain riders and aggressive stand-up trail riders.

A compact emergency tool kit designed to fit inside the Straightline Performance Hide 'N' Go rear bumper.

Performance ice scratchers featuring official custom carbide studs constructed by Woody's®. Complete stainless steel wire rope for extended life. Designed to be run down at all times, but can be mounted on the rails if needed. Large mounting base avoids rail wear. Affordable replacement carbide scratcher tips sold separately.

First in the industry! Completely rebuildable with a full carbon-fiber body. Only weighs 2.6 lbs. One-piece internals. Stainless steel inside and out (unless noted).

Produce a low, deeper tone, without the loud noise. Will save your sled 5 to 7 lbs. and some applications gain 1 to 2 horsepower over stock silencers. Use the stock location exit. Ceramic coating provides under-hood heat reduction and sharp appearance. Lighter stainless version available on select models; saves up to 14 lbs.

A V-Bar light designed to be mounted on the nose cone above the bumper or used with a Straightline Performance front bumper. The Color Remix version uses an iOS or Android® mobile device to control the LED light color, which can be changed infinitely between colors and strobe patterns, and can be synchronized to music. Features completely...

Reshapes the top opening of your oil reservoir back to a perfect sealing surface, eliminating oily residue on the pull rope, exhaust, clutches or brakes. Makes removing and installing the oil cap easier. Wide top lip for large sealing surface; tapered bore for added strength. Complete with rubber O-ring for added sealing.

Includes three pivot bolts (13 g), three pivot bolts (15.4 g) and washers (1 g).

A complete kit designed to fix and upgrade Polaris 800 engines from 2010-2020. Kit includes improved alloy pistons, Titanium-Nitride-coated rings, a precision-ground aluminum spacer plate, longer cylinder bolts, and dowel pins. The design reduces skirt collapse and increases case volume for a 2 to 3 hp gain. Replacement pistons are available...

Adjustable primary clutch weight kit with a gram range of 64 to 68.

For Ski-Doo TRA3/5/7 primary clutches. Stock specifications plus each is fully machined, heat-treated and zinc-coated. Sold in sets of 3.

Allows the QRS jackshaft assembly to be shimmed out for precise alignment. Easy installation. Comes complete with all necessary shims.

Allow for the changing of clickers. Simply push and turn to your next clicker position. Install in minutes.

Gain a solid 3 to 18 horsepower with these sleek-looking single pipes. Produce a wider power band, great bottom-end power and improve top-end speed. Pipes are ceramic-coated or high-temp black for under-hood heat protection, and to create the desired custom look. Use stock mounting locations and brackets.

Direct bolt-on Y-pipe. Provide great torque and horsepower. Do not require modifications or fuel programming; just bolt on and go. Available in ceramic or black high-temperature paint ceramic coated.

For 99-17 Dyna, 99-08 FXDWG; chrome (except 13-17 FXDB). May not fit with all styles of sissy bar side plates.

Nostalgic motorcycle saddlebags with bright chrome studs and roller buckles. Rigid plastic inserts ensure they always look crisp and full. Built from 100% waterproof synthetic leather with a protective rain flap and a heat-resistant base. Faux chrome roller buckles conceal modern side-release buckles. Features hidden handles, a zip-off feature for...